LPJ17003-8AENL 10/100 Base-T 8p8c Green/Yellow LED 2x1 Port RJ45 Female Connector
P/N:
LPJ17003-8AENL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LPJ17003-8AENL
- Compatible Brands: LINK-PP
- Number of Ports: 2X1
- Speed: 10Base-T,100Base-TX
- PoE: Non-PoE
- Latch: Both
- Mounting Type: THT
- LED Option: Green / Yellow
- Shield EMI Tabs: YES
- Temperature: -40℃ to +85°C
- P/N: LPJ17003-8AENL
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LPJ17003-8AENL
Product Specifications
| LINK-PP Part Number: | LPJ17003-8AENL | Connector Type | Jack |
| Part Status | Active | Mounting Type | Through Hole |
| Number of Positions/Contacts | 8p8c (RJ45, Ethernet) | Application-Lan | Ethernet(NoN PoE) |
| Number of Ports | 2x1 Port | Speed | 10/100 Base-T |
| Latch | Both | Cores per Port | 4 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | SIDE ENTRY |
| Shield EMI Tabs | With | LED Option | Green/Yellow |
| PCB | FR4 | PCB Retaining Post | T POST |
| Package Height (Inches/mm) | 0.991/25.19 | Package Length (Inches/mm) | 1.107/28.12 |
| Package Width (Inches/mm) | 0.675/17.16 | Temperature | -40℃ TO +85℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | No | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
LINK-PP LPJ17003-8AENL Technical Overview
The LINK-PP LPJ17003-8AENL is a stacked dual-port (2x1) RJ45 Integrated Connector Module (ICM) with built-in 10/100BASE-TX Fast Ethernet magnetics and integrated Green/Yellow status LEDs on each port. Engineered for 90-degree right-angle through-hole (THT) side-entry mounting on FR4 substrates, it incorporates a 4-core magnetic assembly per port (1CT:1CT turns ratio), a Bob Smith Termination (BST) circuit, an extended industrial temperature rating of -40°C to +85°C, and a metal shield equipped with external EMI spring tabs for multi-port panel grounding across webcams, hard disk players, network interface cards (NICs), and optical terminals.
- Stacked 2x1 Dual-Port Architecture: Vertically consolidates two 10/100BASE-TX RJ45 ports into a single 17.16mm-wide housing to double front-panel port density.
- 10/100BASE-TX Fast Ethernet Magnetics: Integrates a 4-core magnetic matrix per port across transmit and receive channels to support 10/100 Mbps data communication per IEEE 802.3u standards.
- Industrial Operating Temperature (-40°C to +85°C): Fully rated for harsh environmental conditions, unconditioned equipment cabinets, and outdoor surveillance enclosures.
- Metal Shielding With EMI Spring Tabs: External EMI spring tabs establish multi-point grounding contact with chassis panel cutouts to attenuate electromagnetic radiation.
Key Design Benefits
- Stacked Multi-Port Density: Vertical 2x1 layout doubles Fast Ethernet port capacity along motherboard edges, saving horizontal PCB width in high-density networking hardware.
- Extended Industrial Thermal Range: Operates reliably across -40°C to +85°C, making it suitable for outdoor IP cameras, industrial media players, and embedded storage devices.
- Integrated Chassis EMI Grounding: External EMI spring tabs ensure grounding continuity against the enclosure panel cutout, helping suppress radiated EMI.
- Integrated Status Diagnostics: Embedded Green and Yellow LEDs enable direct visual link and activity diagnostics without requiring separate board-mounted light pipes.
- Supply Chain Continuity: Offers hardware engineering and procurement teams a standardized 2x1 stacked Fast Ethernet THT footprint option for secondary sourcing.
Integrated Magnetics & Electrical Architecture
The LPJ17003-8AENL integrates 10/100BASE-TX Fast Ethernet magnetics directly behind the contact pins for both ports, reducing the need for long differential trace runs to discrete magnetics on the motherboard.
4-Core Fast Ethernet Transformer Matrix
The integrated magnetic assembly utilizes a 4-core topology per port across transmit and receive lines with a 1CT:1CT turns ratio. This structure provides galvanic isolation between network cabling and host Fast Ethernet PHY transceivers while suppressing common-mode noise across 10/100BASE-TX lines.
Bob Smith Termination (BST) Circuitry
Integrated 75-ohm termination networks connect transformer center taps to ground, providing defined common-mode noise suppression across both ports.
Mechanical Specifications & PCB Layout
The LPJ17003-8AENL features stacked package dimensions of 25.19mm (H) x 17.16mm (W) x 28.12mm (L) [0.991 x 0.675 x 1.107 in]. The stacked 2x1 90-degree right-angle side-entry profile aligns with standard dual-port vertical chassis cutouts. Mechanical stability on FR4 substrates is reinforced by solderable T-Post PCB pegs, which absorb mechanical stress during dual-cable mating.
Target Applications
- Webcams & IP Surveillance Systems: Stacked dual-port Fast Ethernet interface for multi-channel video recording and camera hubs.
- Hard Disk Players & Storage Terminals: Reliable 10/100 Mbps networking for network-attached storage (NAS) and media streaming hardware.
- Optical Terminals & Network Interface Cards: Compact 2x1 ganged MagJack for optical line terminals (OLT/ONT) and server NICs.
LINK-PP LPJ17003-8AENL Design Verification Checklist
When evaluating the LINK-PP LPJ17003-8AENL for new designs or secondary sourcing qualification, hardware engineers should verify the following parameters against their system specification:
- Magnetics Configuration: Confirm that your Fast Ethernet PHY reference design utilizes a 4-core 1CT:1CT magnetic architecture per port.
- 2x1 Stacked Panel Clearance: Ensure your chassis front-panel cutout matches the 25.19mm height and 17.16mm width of the stacked housing.
- Shield EMI Tab Requirement: Verify that your multi-port bezel cutout requires external EMI spring tabs for chassis grounding contact.
- Thermal Class Verification: Confirm that the -40°C to +85°C industrial operating temperature meets or exceeds your operating environment requirements.
Frequently Asked Questions
What are the primary mechanical and electrical specs of the LINK-PP LPJ17003-8AENL?
The LPJ17003-8AENL is a stacked 2x1 dual-port 10/100BASE-T Fast Ethernet RJ45 MagJack featuring 4-core magnetics (1CT:1CT) per port, Green/Yellow LEDs, external EMI spring tabs, 90-degree THT side-entry mounting, and an extended industrial operating temperature rating of -40°C to +85°C.
What is the advantage of a 2x1 stacked RJ45 MagJack like the LPJ17003-8AENL?
A 2x1 stacked RJ45 MagJack vertically integrates two Fast Ethernet ports into a single 17.16mm-wide housing, saving horizontal PCB width, reducing SMT assembly placement cycles, and simplifying front-panel cutout alignment compared to placing two individual RJ45 jacks.
What engineering assets are available for LPJ17003-8AENL PCB design-in?
LINK-PP provides complete design-in support assets, including 3D STEP models for mechanical enclosure clearance, 2D dimensional CAD drawings, PCB footprint land patterns for EDA software (Altium, Cadence, KiCad), and product specification sheets.
How can procurement and engineering teams request samples or a quotation for LINK-PP LPJ17003-8AENL?
Procurement and engineering teams can contact LINK-PP to request LPJ17003-8AENL evaluation samples for mechanical, electrical, and PCB compatibility verification. After qualification, our technical sales team can provide competitive pricing, production lead-time estimates, MOQ terms, and volume-order support.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































