HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJD4013DNL2.jpg
  • LPJD4013DNL4.jpg
  • LPJD4013DNL3.jpg

Pulse JXD2-0011NL Compatible LINK-PP LPJD4013DNL 10/100 Base-T Without Led Single Port Vertical Mount RJ45 MagJack

P/N:

LPJD4013DNL

Manufacturer:

LINK-PP

Compatible Brand:

Pulse

Compatible P/N:

LPJD4013DNL

  • Compatible Brands: Pulse
  • Number of Ports: 1X1
  • Speed: 1000Base-T
  • PoE: Non-PoE
  • Latch: Up
  • LED Option: No LEDs
  • Shield EMI Tabs: NO
  • Temperature: -40℃ to +85°C
  • P/N: LPJD4013DNL
  • Manufacturer: LINK-PP
  • Compatible Brand: Pulse
  • Compatible P/N: JXD2-0011NL

Packaging Details:

N.W/pCS:

0.012kg

Package:

Tray

SPQ:

40pcs

Qty/carton:

640pcs

Carton size:

37*30*30cm

G.W/carton:

7.5kg

Product Specifications

LINK-PP Part Number: LPJD4013DNL Pulse Part Number JXD2-0011NL
Part Status Active Connector Type Jack
Number of Positions/Contacts 8p8c (RJ45, Ethernet) Application-Lan Ethernet(NoN PoE)
Number of Ports 1x1 Port Speed 10/100 Base-T
Latch Up Cores per Port 4
Orientation 180° Angle (Right) PCB Mount Angle THT Solder
Shield EMI Tabs Without LED Option Without Leds
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.657/16.70 Package Length (Inches/mm) 0.665/16.90
Package Width (Inches/mm) 0.636/16.15 Temperature -40℃ TO 85℃
Bst Circuit Yes AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

Pulse JXD2-0011NL Compatible LINK-PP LPJD4013DNL Vertical Non-LED RJ45 Magjack Technical Overview

The LINK-PP LPJD4013DNL (engineered as a direct 100% pin-to-pin drop-in replacement for Pulse Electronics JXD2-0011NL) is an industrial-grade single-port (1x1) 180° vertical top-entry non-LED female RJ45 Integrated Connector Module (ICM) with built-in 10/100 Base-T Fast Ethernet magnetics and a Bob Smith Termination (BST) circuit. Featuring a perpendicular PCB mounting orientation and an 8p8c pinout, it integrates Fast Ethernet signal isolation transformers and common-mode chokes, delivering 10/100 Mbps data transmission, 1500Vrms isolation, ESD protection, and extended thermal endurance (-40°C to +85°C) for enterprise servers, network firewalls, Ethernet controls, and embedded mainboards.

  • 180° Vertical Top-Entry Non-LED Orientation: Perpendicular board mount design allows Ethernet cables to plug in vertically from the top, providing a clean non-LED profile ideal for enterprise servers, 1U firewalls, and internal embedded boards.
  • Fast Ethernet Magnetics Architecture: 8p8c RJ45 connector integrated with a 4-core transformer/choke matrix (1CT:1CT turns ratio) supporting 10/100BASE-TX communication over Cat5e/Cat6 wiring.
  • Industrial Temperature Endurance (-40°C to +85°C): Certified for an extended operating temperature range of -40°C to +85°C (-40°F to +185°F) for unconditioned outdoor equipment and industrial control cabinets.
  • Direct Cross-Reference Replacement: Fully qualified footprint and electrical drop-in replacement for Pulse Electronics JXD2-0011NL for BOM cost optimization and secondary sourcing.

LINK-PP LPJD4013DNL Vertical Fast Ethernet RJ45 Magjack Connector Overview

LINK-PP LPJD4013DNL is a 180-degree vertical top-entry 1x1 non-LED female RJ45 integrated connector module (ICM) designed for non-PoE Fast Ethernet networking platforms requiring perpendicular cable insertion. Housing signal transformers, common-mode chokes, and Bob Smith Termination within a single compact THT jack, this connector simplifies motherboard layout by replacing discrete PHY magnetics. It provides a highly reliable, pin-compatible secondary-source alternative to Pulse Electronics JXD2-0011NL in enterprise servers, commercial network firewalls, industrial automation controllers, and embedded mainboards.

Key Benefits of LINK-PP LPJD4013DNL / Pulse JXD2-0011NL Compatible Magjack

  • Vertical 180° Top-Entry Architecture: Enables perpendicular RJ45 cable insertion from above the PCB, making it ideal for top-facing server mainboard interfaces, 1U network firewalls, and low-profile vertical chassis.
  • Non-LED Housing Design Eliminates Optical Light Leakage: Streamlined enclosure profile without LEDs is ideal for dark-room server racks, internal system diagnostic headers, or sealed industrial enclosures where status LEDs are unnecessary.
  • Industrial Operating Temperature Range (-40°C to +85°C): Built with high-grade FR4 substrate and durable housing to withstand severe thermal fluctuations in unconditioned outdoor equipment and factory automation cabinets.
  • IEEE 802.3u 10/100BASE-TX Fast Ethernet Speed: Embeds a 4-core transformer and common-mode choke matrix that isolates and filters transmit/receive lines, ensuring clean Fast Ethernet eye diagrams with minimal differential insertion loss.
  • Integrated Bob Smith Termination (BST) & Auto-MDIX: Built-in 75-ohm BST circuit routes common-mode EMI noise and ESD transients safely to ground, while Auto-MDIX logic supports automatic straight-through or crossover cable detection.
  • Direct Second Sourcing for Pulse Electronics JXD2-0011NL: Identical 8p8c through-hole PCB land pattern and pinout allow seamless drop-in secondary sourcing to reduce procurement lead times.

Vertical 180° Top-Entry Architecture & Signal Isolation

The LINK-PP LPJD4013DNL utilizes a specialized 180° Vertical Top-Entry Integrated Connector Module (ICM) architecture designed for applications where side-entry horizontal RJ45 jacks are impractical due to enclosure wall geometry or user access angles.

4-Core Fast Ethernet Magnetics & Perpendicular Insertion

Featuring a 1CT:1CT transmit and receive turns ratio with 4 magnetic cores per port, the LPJD4013DNL establishes 1500Vrms galvanic isolation between the Ethernet PHY transceiver chip and the external network cable. The 4-core layout provides precise impedance matching across transmit and receive differential pairs, suppressing inter-channel crosstalk and common-mode noise.

Bob Smith Termination (BST) & Common-Mode Rejection

The integrated Bob Smith Termination (BST) network utilizes high-voltage capacitors and precision resistors to balance line impedance on unused cable pairs. This prevents common-mode noise reflection, reduces radiated EMI emissions, and enhances system ESD immunity during cable connection.

PCB Mounting & Mechanical Specifications

Designed for standard Through-Hole Technology (THT) wave soldering on FR4 substrates, the LPJD4013DNL incorporates robust mechanical features for top-entry cable stability.

8p8c Pinout & Compact Vertical Package

With package dimensions of 16.70mm H x 16.90mm L x 16.15mm W, the LPJD4013DNL provides a compact vertical footprint. T-Post mechanical pegs anchor the housing firmly to the motherboard during cable plugging, ensuring long-term mechanical reliability on enterprise servers and network firewalls.

Target Applications: Enterprise Servers, Network Firewalls, and Embedded Mainboards

Combining 10/100 Base-T Fast Ethernet speed, 180° vertical top-entry geometry, BST noise suppression, and Pulse JXD2-0011NL compatibility, the LINK-PP LPJD4013DNL supports diverse embedded systems:

  • Enterprise Rack Servers & Server Management: Ideal for 1U/2U rack server management ports, IPMI interfaces, and blade server motherboard connections.
  • Commercial Network Firewalls & SD-WAN Gateways: Deployed in network security firewalls, VPN routers, and commercial network edge appliances.
  • Industrial Ethernet Controllers & Embedded Mainboards: Suitable for industrial single-board computers (SBCs), DIN-rail PLCs, and building automation controllers.

How to Select and Verify LPJD4013DNL vs. Pulse JXD2-0011NL

Hardware design engineers and procurement specialists evaluating the LINK-PP LPJD4013DNL as a second-source replacement for Pulse Electronics JXD2-0011NL should verify the following core parameters:

  • 4-Core 10/100BASE-TX Magnetics Compatibility: Confirm that a 4-core magnetic matrix and a 1CT:1CT turns ratio match your Fast Ethernet PHY transceiver reference design.
  • Non-LED Configuration Check: Verify that your system enclosure design does not rely on integrated LEDs inside the RJ45 jack housing.
  • 180° Vertical PCB Footprint & Pinout: Confirm that the 8p8c vertical through-hole pin arrangement and T-Post peg locations match the Pulse JXD2-0011NL PCB land pattern.
  • Operating Temperature & Height Clearance: Confirm that the -40°C to +85°C industrial temperature rating and 16.70mm package height satisfy your product's environmental specification and clearance budget.

Frequently Asked Questions

Is LINK-PP LPJD4013DNL compatible with Pulse Electronics JXD2-0011NL?

Yes. LINK-PP LPJD4013DNL is a direct functional, electrical, and footprint drop-in replacement for Pulse Electronics JXD2-0011NL, featuring the same 1x1 Tab-Up 180-degree vertical 10/100 Base-T Magjack layout without LEDs.

What is the mounting orientation of LINK-PP LPJD4013DNL?

LINK-PP LPJD4013DNL features a 180-degree vertical top-entry orientation, allowing Ethernet cables to plug in perpendicularly from above the PCB.

Does LINK-PP LPJD4013DNL include integrated status LEDs?

No. LPJD4013DNL is a Non-LED vertical RJ45 Magjack variant, designed for applications where visual LED status indicators are not required.

What is the operating temperature range of LPJD4013DNL?

LINK-PP LPJD4013DNL is rated for an extended industrial operating temperature range of -40°C to +85°C (-40°F to +185°F), making it suitable for unconditioned outdoor equipment and factory automation systems.

What is the function of the integrated Bob Smith Termination (BST) circuit?

The integrated Bob Smith Termination (BST) circuit utilizes built-in resistors and capacitors to balance line impedance on unused cable pairs, suppressing common-mode EMI noise and protecting the Ethernet PHY against ESD transients.

Is LINK-PP LPJD4013DNL a Power over Ethernet (PoE) connector?

No. LPJD4013DNL is a Non-PoE Fast Ethernet RJ45 Magjack designed strictly for Ethernet signal transmission and isolation without DC power delivery.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.