HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • IMG_4152(1711505149865).jpg
  • IMG_4155(1711505149857).jpg
  • IMG_4157(1711505149816).jpg
  • IMG_4153(1711505149930).jpg
  • IMG_4159(1711505149868).jpg

HR983363C Compatible LINK-PP LPJU4111AONL 10/100 Base-T magjack rj45 with DUAL USB Tab Up Orange&Green/Yellow LED

P/N:

LPJU4111AONL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJU4111AONL

  • Number of Ports: RJ45/USB
  • Speed: 10Base-T,100Base-TX
  • PoE: Non-PoE
  • Latch: Up
  • LED Option: Orange&Green / Yellow
  • Shield EMI Tabs: YES
  • Temperature: 0℃ to 70℃
  • P/N: LPJU4111AONL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: HR983363C

Packaging Details:

N.W/pCS:

0.017kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

700pcs

Carton size:

40*33*34cm

G.W/carton:

12kg

Product Specifications

LINK-PP Part Number: LPJU4111AONL Part Number HR983363C
Part Status Active Connector Type Jack
Number of Positions/Contacts 8p8c (RJ45, Ethernet) Application-Lan Ethernet(NoN PoE)
Number of Ports Single Port with Dual USB Speed 10/100 Base-T
Latch UP Cores per Port 4
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs With LED Option Orange&Green/Yellow Led
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 1.157/29.40 Package Length (Inches/mm) 1.019/25.88
Package Width (Inches/mm) 0.682/17.32 Temperature 0℃ TO 70℃
Bst Circuit Yes AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

Single-Port 10/100BASE-T RJ45 with Dual USB Combo Jack

The LINK-PP LPJU4111AONL is a multi-interface connector assembly combining a single-port 10/100 Base-T Fast Ethernet RJ45 MagJack with two integrated USB ports in a vertically stacked, right-angle through-hole configuration. Designed with an internal 4-core magnetic structure, 1CT:1CT turns ratio, integrated Bob Smith termination (BST), and AutoMDX support, the Ethernet interface supports IEEE 802.3-compliant signal isolation and common-mode noise suppression across the specified 0℃ TO 70℃ operating temperature range.

The mechanical assembly features a Tab-Up latch orientation, perimeter shield EMI tabs, Orange&Green/Yellow status LEDs, and molded T-Post retaining pins. With dimensions of 29.40 mm (1.157 inches) in height, 17.32 mm (0.682 inches) in width, and 25.88 mm (1.019 inches) in length, the LPJU4111AONL provides a consolidated I/O footprint suited for embedded main boards, industrial PCs (IPCs), smart TVs, commercial displays, and Ethernet control units.

Lifecycle: Active
Interface Combination: Single Port RJ45 + Dual USB
Ethernet Speed: 10/100 Base-T
Cross Reference: HR983363C
Operating Temperature: 0℃ TO 70℃ Commercial
Qualification Support: Sample Evaluation / Second Source

Compatibility and Design Positioning

The LINK-PP LPJU4111AONL is positioned as a cross-reference and alternative sourcing option for the HR983363C single-port 10/100 Base-T RJ45 with dual USB combo jack. The two devices share key characteristics including a stacked RJ45 over dual USB mechanical form factor, 8P8C through-hole construction, Tab-Up latch orientation, 1CT:1CT turns ratio, 4 cores per port, Orange&Green/Yellow LED configuration, commercial 0℃ TO 70℃ operating temperature rating, and integrated Fast Ethernet magnetics. Engineering teams should verify pin assignments, footprint dimensions, USB terminal mapping, LED circuitry, and mechanical tolerances against the applicable official drawings before approving component substitution.

Procurement and OEM Qualification

For sourcing teams and OEM engineering programs evaluating the LPJU4111AONL as a second-source or BOM alternative, key qualification parameters include PCB mechanical footprint, pinout alignment, LED drive characteristics, electrical isolation parameters, operating temperature rating, and expected volume demand. LINK-PP can support sample evaluation, mechanical drawing review, and documentation requirements for prototype validation, AVL qualification, and volume production planning.

Stacked RJ45 + Dual USB Hybrid Topology and Board-Edge Optimization

Consolidating Ethernet and USB interfaces into a single vertical connector assembly provides layout and enclosure packaging advantages for compact computing systems:

  • Board-Edge Space Consolidation: Stacking one RJ45 port directly over two USB receptacles occupies a compact 17.32 mm (0.682 inches) horizontal width, freeing up valuable board-edge space compared to placing separate discrete connectors side-by-side.
  • Unified Front-Panel Cutout: A single combo housing simplifies front-panel sheet metal stamping and tolerance management compared to managing separate cutouts for independent LAN and USB jacks.
  • Board-Edge Ergonomics: The Tab-Up latch positions the RJ45 plug release latch on the upper face, facilitating natural finger access without interfering with the underlying USB ports.
  • 29.40 mm Vertical Height Profile: The 29.40 mm (1.157 inches) housing height supports multi-interface packaging in standard desktop enclosures, embedded chassis, and IPC faceplates.
  • Perimeter Shield EMI Tabs & T-Post Retention: Exterior spring tabs establish multi-point contact with the equipment front panel, while molded plastic T-Posts distribute mechanical insertion and extraction stresses directly into the FR4 PCB substrate.

Internal Magnetics Architecture, Fast Ethernet Signaling, and AutoMDX

The LPJU4111AONL incorporates an internal 4-core magnetic architecture supporting Fast Ethernet communication. A symmetrical 1CT:1CT turns ratio across transmit and receive stages in a T, C configuration enables broad interface compatibility with standard voltage-mode and current-mode Fast Ethernet PHY transceivers.

The integrated magnetics include Bob Smith termination (BST) to help manage common-mode noise, while AutoMDX support enables automatic differential pair crossover detection. Electrical isolation complies with IEEE 802.3 specifications as defined in the product documentation, separating PHY circuitry from line-side transients and cable common-mode noise. The non-PoE data architecture is optimized exclusively for differential high-speed data transmission without DC bias heating.

Mechanical Envelope and PCB Layout Considerations

When integrating the LPJU4111AONL into host hardware layouts, engineering teams should account for the following structural and electrical parameters:

1. Package Dimensions and Front-Panel Cutout

The connector body measures 29.40 mm (1.157 inches) in height, 25.88 mm (1.019 inches) in length, and 17.32 mm (0.682 inches) in width. Front-panel openings must be designed with appropriate clearances to allow unhindered deflection of the perimeter EMI spring tabs while accommodating both the RJ45 and dual USB mating apertures.

2. Multi-Interface Through-Hole Routing and Signal Isolation

The PCB-side pin pattern provides through-hole terminations for Ethernet differential signals, LED indicators, and dual USB data/power lines. Host PCB designers should maintain physical separation and ground shielding between Fast Ethernet differential traces and USB signal lines to prevent cross-interface noise coupling.

3. Tab-Up Latch and USB Mating Headroom

Because the release latch is oriented on the top face, designers should provide adequate vertical clearance above the connector port to ensure field technicians can easily depress the plug latch without mechanical interference during simultaneous USB and network cable connection.

4. Status LED Circuitry

The connector features an Orange&Green bi-color indicator on one side and a single Yellow indicator on the other. Hardware engineers should implement suitable series current-limiting resistors matching the host PHY LED driver polarity and target forward current specifications.

Design Consideration Comparison: Integrated RJ45 + Dual USB Combo vs. Discrete Implementations

Design Consideration LPJU4111AONL
RJ45 + Dual USB Combo Jack
Discrete RJ45 MagJack
+ Separate Dual USB Jack
Stacked 2×1
Dual RJ45 MagJack
Interface Types 1 × Fast Ethernet RJ45 + 2 × USB 1 × RJ45 and 2 × USB (Separate) 2 × Ethernet RJ45 Ports
Horizontal Board Width 17.32 mm (Consolidated) ~32.00 mm – 35.00 mm (Separate footprints) ~17.00 mm – 18.00 mm
Vertical Height Envelope 29.40 mm profile Variable based on selected jacks ~25.00 mm – 28.00 mm
PCB Assembly Operations Single through-hole placement Two separate through-hole placements Single through-hole placement
Front-Panel Bezel Design Single unified multi-interface cutout Two separate panel cutouts required Dual-row RJ45 cutout
Primary Engineering Focus Consolidates LAN and USB on compact board edges Independent physical placement flexibility Dual Ethernet port consolidation

Application Considerations for LPJU4111AONL

Target Application Profile Primary Engineering Consideration
Embedded Main Boards & Single-Board Computers Consolidates Fast Ethernet and dual USB I/O into a single 17.32 mm width to conserve board-edge real estate.
Industrial PCs & Factory Automation Controllers Combines network communications and peripheral connectivity in a unified through-hole housing.
Smart TVs & Commercial Digital Signage Unified front-panel opening simplifies enclosure mechanical tooling and bezel alignment for multimedia displays.
Industrial Ethernet Control & Field Gateways Tab-Up latch aligns with front-panel cutouts, while perimeter shield tabs support chassis grounding and EMI control.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing a bill of materials using the LPJU4111AONL, hardware engineers should confirm the following design parameters against official documentation:

  • Footprint and Pinout Verification: Verify the 8P8C signal pin pattern, USB terminal positions, LED pin locations, and T-Post drill sizes against the official LINK-PP LPJU4111AONL drawing.
  • Signal Separation on Host PCB: Maintain appropriate trace spacing and ground isolation between Fast Ethernet differential pairs and USB signal lines.
  • Tab-Up Headroom Clearance: Confirm that the enclosure cutout provides sufficient vertical clearance above the port for cable plug latch engagement and release.
  • LED Drive Polarity and Resistors: Check the host PHY LED driver configuration and select appropriate series resistors for the Orange&Green bi-color and single Yellow LEDs.
  • Chassis Grounding Path: Verify that the PCB shield pins connect to a low-impedance chassis ground plane to support front-panel EMI tab performance.
  • Thermal Environment: Ensure that the operating environment inside the equipment chassis remains within the specified 0℃ TO 70℃ commercial temperature range.

Frequently Asked Questions

What are the primary specifications of the LINK-PP LPJU4111AONL?

The LPJU4111AONL is a single-port 10/100 Base-T Fast Ethernet(NoN PoE) RJ45 MagJack integrated with a dual USB port assembly. It features an 8P8C contact configuration, 4-core internal magnetics, 1CT:1CT turns ratio, Tab-Up latch orientation, side-entry through-hole mounting, Orange&Green/Yellow LEDs, a metal shield with EMI tabs, integrated BST circuit, AutoMDX support, and an operating temperature range of 0℃ TO 70℃.

Is the LINK-PP LPJU4111AONL compatible with the HR983363C?

The LPJU4111AONL is positioned as a cross-reference and alternative sourcing option for the HR983363C. Both devices share matching through-hole footprints, 1CT:1CT turns ratios, 4 cores per port, Tab-Up latch profiles, Orange&Green/Yellow LED configurations, and stacked RJ45 + dual USB hybrid mechanical envelopes. Engineering teams should cross-reference official product drawings before volume changeovers.

What are the design advantages of an integrated RJ45 + Dual USB combo connector?

An integrated RJ45 + Dual USB combo connector vertically stacks Ethernet and USB ports into a single 17.32 mm (0.682 inches) horizontal footprint. This cuts board-edge space consumption roughly in half compared to placing discrete connectors side-by-side, simplifies front-panel cutout tooling, and reduces component placement operations during assembly.

How does the Tab-Up latch orientation benefit stacked combo connectors?

A Tab-Up latch positions the RJ45 plug release latch on the upper face of the connector, pointing away from the lower USB ports. This prevents mechanical interference between the user's thumb and inserted USB peripherals when disconnecting the Ethernet cable.

How are the Orange&Green and Yellow LEDs driven on the host PCB?

The connector includes an Orange&Green bi-color indicator on one side and a single Yellow indicator on the other. The LED functions should be configured according to the host PHY reference design and the connector's electrical specifications. Depending on the selected LED control scheme, the indicators may be used for link speed, link status, or activity indication.

Is the LPJU4111AONL suitable for Power over Ethernet (PoE) applications?

No. The LPJU4111AONL is specified as an Ethernet(NoN PoE) connector for data-only Fast Ethernet interfaces. For applications requiring PoE power delivery, a connector and magnetics solution specifically rated for the required PoE standard and DC current conditions should be selected.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.