LPJD4834BDNL 10/100/1000 Base-T Vertical Magnetic RJ45 Jack Yellow/Green LED
P/N:
LPJD4834BDNL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LPJD4834BDNL
- Compatible Brands: LINK-PP
- Number of Ports: 1X1
- Speed: 1000Base-T
- PoE: Non-PoE
- Latch: Up
- LED Option: Yellow / Green
- Shield EMI Tabs: NO
- Temperature: -40℃ to +85°C
- P/N: LPJD4834BDNL
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LPJD4834BDNL
Packaging Details:
N.W/pCS:
0.012kg
Package:
Tray
SPQ:
40pcs
Qty/carton:
640pcs
Carton size:
37*30*30cm
G.W/carton:
7.5kg
Product Specifications
| LINK-PP Part Number | LPJD4834BDNL | Connector Type | Jack |
| Part Status | Active | Mounting Type | Through Hole |
| Number of Positions/Contacts | 10p8c (RJ45, Ethernet) | Application-Lan | Ethernet(NoN PoE) |
| Number of Ports | 1x1 Port | Speed | 10/100/1000 Base-T |
| Latch | Up | Cores per Port | 8 |
| Orientation | 180° Angle (Right) | PCB Mount Angle | THT Solder |
| Shield EMI Tabs | Without | LED Option | Yellow/Green Leds |
| PCB | FR4 | PCB Retaining Post | T POST |
| Package Height (Inches/mm) | 0.660/16.76 | Package Length (Inches/mm) | 0.911/23.15 |
| Package Width (Inches/mm) | 0.634/16.10 | Temperature | -40℃ TO 85℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | No | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
LINK-PP LPJD4834DNL Vertical Gigabit 100/1000 Base-T RJ45 Technical Overview
The LINK-PP LPJD4834DNL / LPJD4834BDNL is an industrial-grade single-port (1x1) 180° vertical top-entry female RJ45 Integrated Connector Module (ICM) with built-in 10/100/1000 Base-T Gigabit magnetics, Yellow/Green status LEDs, and a Bob Smith Termination (BST) circuit. Featuring a perpendicular PCB mounting orientation and a 10p8c pinout, it integrates an 8-core Gigabit transformer/choke matrix (1CT:1CT turns ratio) across 4 differential pairs, delivering 1 Gbps full-duplex data transmission, 1500Vrms isolation, ESD protection, and extended thermal endurance (-40°C to +85°C) for entrance guard systems, SMPS power modules, security alarms, and Ethernet controllers.
- 180° Vertical Top-Entry Orientation: Perpendicular board mount design allows Ethernet cables to plug in vertically from the top, solving spatial constraints in top-access entrance guard controllers, SMPS power units, and industrial alarm panels.
- Full Gigabit Ethernet Magnetics Architecture: 10p8c RJ45 connector integrated with an 8-core magnetic matrix (1CT:1CT turns ratio) supporting 1000BASE-T full-duplex communication over Cat5e/Cat6 wiring.
- Industrial Temperature Endurance (-40°C to +85°C): Certified for an extended operating temperature range of -40°C to +85°C (-40°F to +185°F) with optional 6u", 15u", or 30u" gold contact plating for unconditioned enclosures.
- Built-In Circuit Protection & Noise Rejection: Features an integrated Bob Smith Termination (BST) network and Auto-MDIX logic for enhanced common-mode EMI suppression and automatic cable crossover detection.
LINK-PP LPJD4834DNL Vertical Gigabit RJ45 Magjack Connector Overview
LINK-PP LPJD4834DNL (and LPJD4834BDNL) is a 180-degree vertical top-entry 1x1 female RJ45 integrated connector module (ICM) designed for non-PoE Gigabit Ethernet (1000BASE-T) networking platforms requiring perpendicular cable insertion. Housing 8-core signal transformers, common-mode chokes, Yellow/Green visual status LEDs, and Bob Smith Termination within a single compact THT jack, this connector simplifies motherboard layout. It provides a highly reliable solution for commercial entrance guard systems, switched-mode power supplies (SMPS), industrial security alarm panels, and building automation gateways.
Key Benefits of LINK-PP LPJD4834DNL Vertical Gigabit RJ45 Connector
- Vertical 180° Top-Entry Architecture: Enables perpendicular RJ45 cable insertion from above the PCB, making it ideal for top-facing entrance guard controllers, SMPS power supplies, and low-profile vertical chassis.
- Full Gigabit 1000BASE-T Speed (IEEE 802.3ab): Embeds an 8-core transformer and common-mode choke matrix that isolates and filters 4 differential pairs, ensuring clean 1 Gbps eye diagrams with minimal differential insertion loss.
- Industrial Operating Temperature Range (-40°C to +85°C): Built with high-grade FR4 substrate and durable housing to withstand severe thermal fluctuations in unconditioned outdoor access control panels and power supply modules.
- Fully Integrated Magjack Architecture (ICM): Embeds 8-core Gigabit isolation transformers, common-mode chokes, resistors, and capacitors inside the vertical connector frame, reducing SMT component count and board footprint.
- Integrated Yellow/Green Visual Status LEDs: Built-in LED indicators provide clear visual diagnostics for Gigabit link establishment and data activity status.
- Integrated Bob Smith Termination (BST) & Auto-MDIX: Built-in 75-ohm BST circuit routes common-mode EMI noise and ESD transients safely to ground, while Auto-MDIX logic supports automatic straight-through or crossover cable detection.
Vertical 180° Top-Entry Architecture & 1000BASE-T Signal Isolation
The LINK-PP LPJD4834DNL utilizes a specialized 180° Vertical Top-Entry Integrated Connector Module (ICM) architecture designed for applications where side-entry horizontal RJ45 jacks are impractical due to enclosure wall geometry or user access angles.
8-Core Gigabit Ethernet Magnetics & Perpendicular Insertion
Featuring a 1CT:1CT transmit and receive turns ratio with 8 magnetic cores per port, the LPJD4834DNL establishes 1500Vrms galvanic isolation between the PHY transceiver chip and the external network line. The internal 8-core layout provides precise impedance matching across all 4 differential pairs required for 1000BASE-T Gigabit Ethernet, suppressing inter-pair crosstalk and common-mode noise.
Bob Smith Termination (BST) & Common-Mode Rejection
The integrated Bob Smith Termination (BST) network utilizes high-voltage capacitors and precision resistors to balance line impedance on unused cable pairs. This prevents common-mode noise reflection, reduces radiated EMI emissions, and enhances system ESD immunity during cable connection.
PCB Mounting & Mechanical Specifications
Designed for standard Through-Hole Technology (THT) wave soldering on FR4 substrates, the LPJD4834DNL incorporates robust mechanical features for top-entry cable stability.
10p8c Pinout & Compact Vertical Package
With package dimensions of 16.76mm H x 23.15mm L x 16.10mm W, the LPJD4834DNL provides a compact vertical footprint. Integrated Yellow/Green LEDs provide clear visual link status and activity diagnostics, while T-Post mechanical pegs anchor the housing firmly to the motherboard during cable plugging.
Target Applications: Entrance Guard Systems, SMPS, and Alarms
Combining IEEE 802.3ab Gigabit speed, 180° vertical top-entry geometry, BST noise suppression, and industrial thermal endurance (-40°C to +85°C), the LINK-PP LPJD4834DNL supports diverse embedded systems:
- Commercial Entrance Guard Systems & Access Controllers: Ideal for door access control panels, commercial security intercom terminals, and smart lock access gateways.
- Switched-Mode Power Supplies (SMPS) & Power Modules: Deployed in intelligent SMPS power supplies, digital power controllers, and industrial power gateways.
- Security Alarm Panels & Industrial Controllers: Suitable for commercial security alarm control panels, DIN-rail PLCs, and building automation controllers.
How to Select and Verify LINK-PP LPJD4834DNL RJ45 Magjack
Hardware design engineers and procurement specialists evaluating the LINK-PP LPJD4834DNL for new designs or second-source qualification should verify the following core parameters:
- 8-Core 1000BASE-T Magnetics Compatibility: Confirm that an 8-core magnetic matrix (4 differential pairs) and a 1CT:1CT turns ratio match your Gigabit PHY transceiver reference design.
- 180° Vertical PCB Footprint & Pinout: Confirm that the 10p8c vertical through-hole pin arrangement and T-Post peg locations match your PCB land pattern.
- Yellow/Green LED Driving Polarity: Confirm that the Yellow/Green LED configuration and pin polarity match your host SMT LED driving circuit.
- Vertical Clearance & Package Height: Verify that the 16.76mm package height fits within your top enclosure faceplate cutout and vertical clearance budget.
Frequently Asked Questions
What is LINK-PP LPJD4834DNL?
LINK-PP LPJD4834DNL (and LPJD4834BDNL) is a single-port (1x1) 180-degree vertical top-entry female RJ45 Magjack featuring integrated Gigabit 10/100/1000 Base-T magnetics, Yellow/Green status LEDs, an integrated Bob Smith Termination circuit, and an operating temperature range of -40°C to +85°C.
Does LINK-PP LPJD4834DNL support Gigabit Ethernet (1000BASE-T)?
Yes. LPJD4834DNL is equipped with an 8-core magnetic matrix supporting 10/100/1000 Base-T full-duplex Gigabit Ethernet data rates compliant with IEEE 802.3ab standards.
What is the mounting orientation of LINK-PP LPJD4834DNL?
LINK-PP LPJD4834DNL features a 180-degree vertical top-entry orientation, allowing Ethernet cables to plug in perpendicularly from above the PCB.
What is the operating temperature range of LPJD4834DNL?
LINK-PP LPJD4834DNL is rated for an extended industrial operating temperature range of -40°C to +85°C (-40°F to +185°F), making it suitable for unconditioned outdoor access control panels and power supplies.
What is the function of the integrated Bob Smith Termination (BST) circuit?
The integrated Bob Smith Termination (BST) circuit utilizes built-in resistors and capacitors to balance line impedance on unused cable pairs, suppressing common-mode EMI noise and protecting the Ethernet PHY against ESD transients.
Is LPJD4834DNL a Power over Ethernet (PoE) connector?
No. LPJD4834DNL is a Non-PoE Gigabit RJ45 Magjack designed strictly for Ethernet signal transmission and isolation without DC power delivery.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































