HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • 4(1711439914055).jpg
  • 3(1711439914024).jpg
  • 2(1711439913990).jpg
  • 5(1711439913983).jpg
  • 1(1711439913947).jpg

LPJD4835B51NL RJ45 Vertical Ethernet Jack 10/100/1000 Base-T Green&Yellow/Yellow&Green LED

P/N:

LPJD4835B51NL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJD4835B51NL

  • Compatible Brands: LINK-PP
  • Number of Ports: 1X1
  • Speed: 1000Base-T
  • PoE: Non-PoE
  • Latch: Up
  • Shield EMI Tabs: NO
  • Temperature: -40℃ to +85°C
  • P/N: LPJD4835B51NL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LPJD4835B51NL

Packaging Details:

N.W/pCS:

0.012kg

Package:

Tray

SPQ:

40pcs

Qty/carton:

640pcs

Carton size:

37*30*30cm

G.W/carton:

7.5kg

Product Specifications

LINK-PP Part Number LPJD4835B51NL Connector Type RJ45 MagJack (Integrated Magnetics)
Part Status Active Mounting Type Through Hole (THT)
Number of Positions/Contacts 10P8C (RJ45, Ethernet) Application-LAN Ethernet (Non-PoE)
Number of Ports Single Port (1×1) Speed 10/100/1000BASE-T (Gigabit)
Latch Orientation Up (Top Latch) Cores per Port 8
Mechanical Orientation 180° Vertical (Top Entry) PCB Mount Angle Vertical / Straight Entry
Shield EMI Tabs Without EMI Tabs LED Option Green&Yellow / Yellow&Green (Bi-Color)
PCB Material FR4 PCB Retaining Post T-Post
Package Height (Inches/mm) 0.660 / 16.76 Package Length (Inches/mm) 0.911 / 23.15
Package Width (Inches/mm) 0.634 / 16.10 Operating Temperature -40°C to +85°C (Industrial)
BST Circuit Yes AutoMDX Yes
Diodes No Contact Mating Area Plating Gold 6µ" / 15µ" / 30µ"
Turns Ratio (RX/TX) 1CT:1CT Configuration (RX/TX) T, C

Single-Port Vertical 180° Top-Entry 10/100/1000BASE-T RJ45 MagJack

The LINK-PP LPJD4835B51NL is a single-port 10/100/1000BASE-T Gigabit RJ45 integrated connector module (MagJack) engineered in a vertical 180° top-entry through-hole configuration. For hardware design engineers, it incorporates an 8-core magnetic structure, 1CT:1CT turns ratio, integrated Bob Smith termination (BST), AutoMDX support, and dual bi-color LEDs (Green&Yellow / Yellow&Green) to ensure high signal integrity and IEEE 802.3 compliance. For procurement and sourcing teams, the LPJD4835B51NL offers an active, qualified alternative sourcing option for vertical Gigabit Ethernet jacks, featuring customizable gold plating thicknesses (6µ", 15µ", or 30µ") to balance cost efficiency and contact mating cycle longevity. For OEM system integrators, the 180° perpendicular mating orientation is tailored for top-panel cable connections in network firewalls, machine inverters, industrial PCs (IPCs), and DIN-rail automation controllers, while the shield without EMI tabs ensures smooth integration into non-conductive or tight-tolerance panel cutouts without mechanical snagging.

Specified for an industrial operating temperature range of -40°C to +85°C, the LPJD4835B51NL delivers non-PoE Gigabit connectivity within a defined 16.76 mm height profile. Sourcing and engineering teams should cross-reference the mechanical drawing, pin assignments, PCB drill patterns, and PHY transceiver interface requirements prior to final manufacturing release.

Port Configuration: Single Port (1×1) 10/100/1000BASE-T
Mating Orientation: 180° Vertical (Top Entry)
Operating Temperature: -40°C to +85°C Industrial
Magnetics Architecture: 8-Core Integrated Design
Shield Configuration: Metal Shield (Without EMI Tabs)
Status Indication: Bi-Color LEDs (Green&Yellow / Yellow&Green)

Compatibility and Design Positioning

The LPJD4835B51NL is positioned as an alternative sourcing option for vertical 180° top-entry Gigabit RJ45 MagJack applications. It provides direct design relevance for hardware platforms requiring vertical cable access through the top or front faceplate rather than conventional horizontal board-edge routing. Engineering and procurement teams should verify terminal pin assignments, T-Post PCB retaining hole locations, LED polarity configurations, and overall vertical clearances against the official LINK-PP product drawing before finalizing component qualification.

Vertical 180° Top-Entry Topology and Chassis Design Advantages

Implementing a vertical 180° RJ45 connector topology provides distinct architectural benefits for compact enclosures, specialized industrial equipment, and network appliances:

  • Perpendicular Cable Access: The top-entry mating orientation allows Ethernet patch cords to insert perpendicularly into the PCB plane, ideal for top-accessible DIN-rail controllers, machine inverters, and network firewalls mounted in shallow enclosures.
  • Tab-Less Shield Exterior: The metal shield without perimeter EMI spring tabs facilitates smooth insertion into tight chassis bezels, plastic front panels, or customized faceplates without binding, bending, or catching on panel edges.
  • Mechanical T-Post Retention: Integrated T-Post retention pins absorb downward insertion forces and upward extraction stresses, protecting solder joints against mechanical fatigue during frequent field servicing.
  • -40°C to +85°C Industrial Resilience: The extended temperature rating ensures stable electrical parameters and mechanical integrity in unventilated enclosures subject to severe ambient thermal swings.

Integrated 8-Core Gigabit Magnetics and AutoMDX Support

The LPJD4835B51NL incorporates an internal 8-core magnetic architecture supporting all four differential pairs required for full-duplex 10/100/1000BASE-T Gigabit Ethernet operation. With a 1CT:1CT turns ratio across transmit and receive channels, the connector provides seamless impedance matching with standard current-mode and voltage-mode Ethernet PHY transceivers.

The integrated Bob Smith termination (BST) circuit minimizes common-mode reflections and improves overall electromagnetic compatibility (EMC). Full AutoMDX compliance enables automatic cable crossover detection, while galvanic isolation compliant with IEEE 802.3 shields sensitive host silicon from cable-induced surges and ground potential shifts.

Mechanical Envelope and PCB Layout Considerations

When incorporating a vertical top-entry MagJack, hardware layout and mechanical packaging engineers should address the following design considerations:

1. Package Envelope and Vertical Clearance

The connector body stands 16.76 mm (0.660 inches) tall above the PCB, with a length of 23.15 mm (0.911 inches) and a width of 16.10 mm (0.634 inches). Enclosure designers must verify vertical headroom to accommodate both the connector body and the bend radius of the mating RJ45 cable assembly.

2. T-Post Mechanical Anchoring

Because vertical connectors experience direct vertical insertion and pulling forces, the molded T-Post retaining posts must be accurately positioned on the host PCB. Correct hole sizing ensures that mechanical stress is transferred directly to the FR4 substrate rather than through the through-hole electrical solder joints.

3. Shield Grounding Without EMI Tabs

With an exterior shield devoid of peripheral EMI fingers, electrical chassis grounding is accomplished through dedicated through-hole solder shield pins. Designers should establish low-impedance ground connections directly from these shield pins to the PCB chassis ground plane.

4. Bi-Color LED Drive Circuitry

The connector features two bi-color LED packages (Green&Yellow / Yellow&Green) providing multi-state link, speed, and activity indication. Hardware designers should verify LED polarity, drive voltage, and current-limiting resistor values according to the host PHY's LED driver specifications.

Architecture Comparison: Vertical Top-Entry MagJack vs. Alternative Implementations

Evaluation Metric LPJD4835B51NL
Vertical 180° Top-Entry MagJack
Right-Angle 90°
Side-Entry MagJack
Discrete Magnetics +
Vertical RJ45 Jack
Cable Insertion Plane Perpendicular (Top Entry) Parallel to PCB (Side Entry) Perpendicular (Top Entry)
Board-Edge Dependency Flexible (Can place inward on PCB) Rigid (Must align with PCB edge) Flexible (Can place inward on PCB)
Shield Tab Configuration Without EMI Tabs (Smooth Exterior) Typically with EMI Tabs Model-dependent
Assembly Placements Single integrated assembly Single integrated assembly Two placements (Transformer + Jack)
Operating Temperature -40°C to +85°C (Industrial) Model-dependent Model-dependent
Primary Design Focus Top-panel / vertical I/O integration Standard front-panel edge I/O Custom physical modularity

Application Considerations for LPJD4835B51NL

Target Application Profile Primary Engineering Consideration
Network Firewalls & Security Appliances Vertical top-entry mating supports top-facing or recessed panel I/O in compact security appliances.
Machine Inverters & Motor Drives -40°C to +85°C rating and vertical entry facilitate downward wiring channels inside industrial drive cabinets.
Industrial PCs & DIN-Rail Controllers T-Post mechanical anchoring withstands vertical cable insertion and extraction stresses on slim DIN-rail hardware.
Routers & Industrial Gateways Shield without EMI tabs allows clean integration into flush faceplates and custom non-metallic enclosures.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing procurement using the LPJD4835B51NL, hardware engineers should confirm the following technical factors:

  • Through-Hole Drill and Land Pattern: Cross-check the 10P8C pin layout, T-Post hole diameters, and shield solder pad dimensions against the official LINK-PP LPJD4835B51NL mechanical drawing.
  • Enclosure Headroom & Cable Strain Relief: Ensure sufficient vertical clearance within the chassis to accommodate the 16.76 mm connector height plus the boot length and minimum bend radius of standard Cat5e/Cat6 patch cables.
  • Bi-Color LED Polarity and Drive Levels: Verify the pinout and polarity of the Green&Yellow and Yellow&Green LEDs against the Ethernet PHY driver outputs, selecting suitable series current-limiting resistors.
  • Shield Grounding Path: Verify that the PCB through-hole shield pins connect to a clean chassis ground plane with adequate trace width to ensure effective EMC suppression without EMI fingers.
  • PHY Transceiver Compatibility: Confirm that the 1CT:1CT turns ratio and internal BST termination circuit match the selected Gigabit PHY reference architecture.
  • Operating Thermal Environment: Verify that internal enclosure temperatures under continuous full-duplex operation remain within the rated -40°C to +85°C industrial window.

Frequently Asked Questions

What are the primary specifications of the LINK-PP LPJD4835B51NL?

The LPJD4835B51NL is a single-port 10/100/1000BASE-T Gigabit RJ45 MagJack with a 180° vertical top-entry through-hole design. It features an 8-core magnetic architecture, 1CT:1CT turns ratio, integrated BST circuit, AutoMDX support, dual bi-color LEDs (Green&Yellow / Yellow&Green), T-Post PCB retention, a metal shield without EMI tabs, and an industrial operating temperature range of -40°C to +85°C.

What are the engineering advantages of a vertical 180° top-entry MagJack?

A vertical 180° top-entry MagJack allows network cables to be inserted perpendicularly to the PCB surface. This is advantageous for DIN-rail controllers, top-accessible industrial inverters, and network security appliances where cables must connect directly through the top or face panel rather than a crowded board edge.

Why does the LPJD4835B51NL feature a shield without EMI tabs?

A shield without external spring EMI tabs provides a smooth exterior contour that prevents mechanical snagging when installing the connector into flush-fitting enclosure cutouts or non-conductive bezels. Grounding is achieved securely through through-hole PCB shield pins connected directly to the system ground plane.

How are the bi-color Green&Yellow / Yellow&Green LEDs driven?

The LPJD4835B51NL features bi-color LEDs on both the left and right positions (Green&Yellow / Yellow&Green). Depending on the host PHY drive architecture, these LEDs can display distinct states for link speed, network activity, and diagnostic conditions via bidirectional polarity control or shared-cathode drive circuits with appropriate current-limiting resistors.

Is the LPJD4835B51NL suitable for Power over Ethernet (PoE)?

No. The LPJD4835B51NL is designed strictly for Non-PoE Ethernet applications. Its internal magnetic chokes and wiring are engineered for Gigabit differential data communication and IEEE 802.3 galvanic isolation, and do not support DC power carriage as specified in IEEE 802.3af/at/bt standards.

What role do the molded T-Posts play in vertical MagJack assembly?

Because vertical top-entry connectors experience direct downward insertion and upward extraction forces, the molded T-Post retaining posts mechanically anchor the connector body to the FR4 PCB. This redistributes physical stress away from the through-hole electrical solder joints to prevent pad delamination or solder cracking over repeated mating cycles.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.