Premier RJ-180A03A Compatible LINK-PP LPJD0011DNL 10/100Base-T Without LED Vertical Ethernet Integrated RJ45 FastJacks
P/N:
LPJD0011DNL
Manufacturer:
LINK-PP
Compatible Brand:
Premier
Compatible P/N:
LPJD0011DNL
- Number of Ports: 1X1
- Speed: 10Base-T,100Base-TX
- PoE: Non-PoE
- Latch: Up
- LED Option: No LEDs
- Shield EMI Tabs: NO
- Temperature: 0℃ to 70℃
- P/N: LPJD0011DNL
- Manufacturer: LINK-PP
- Compatible Brand: Premier
- Compatible P/N: RJ-180A03A
Packaging Details:
N.W/pCS:
0.008kg
Package:
Tray
SPQ:
50pcs
Qty/carton:
1000pcs
Carton size:
32*30*31cm
G.W/carton:
7.5kg
Product Specifications
| LINK-PP Part Number: | LPJD0011DNL | Premier Part Number | RJ-180A03A |
| Part Status | Active | Connector Type | Jack |
| Number of Positions/Contacts | 8p8c (RJ45, Ethernet) | Application-Lan | Ethernet(NoN PoE) |
| Number of Ports | 1x1 Port | Speed | 10/100 Base-T |
| Latch | Up | Cores per Port | 4 |
| Orientation | 180° Angle (Right) | PCB Mount Angle | THT Solder |
| Shield EMI Tabs | Without | LED Option | Without |
| PCB | FR4 | PCB Retaining Post | T POST |
| Package Height (Inches/mm) | 0.665/16.90 | Package Length (Inches/mm) | 0.657/16.70 |
| Package Width (Inches/mm) | 0.630/16.00 | Temperature | 0℃ TO 70℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | No | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
Premier RJ-180A03A Compatible LINK-PP LPJD0011DNL Vertical Non-LED RJ45 Magjack Technical Overview
The LINK-PP LPJD0011DNL (engineered as a direct 100% pin-to-pin drop-in replacement for Premier Magnetics RJ-180A03A) is a single-port (1x1) 180° vertical top-entry non-LED RJ45 Integrated Connector Module (ICM) with built-in 10/100 Base-T magnetics and a Bob Smith Termination (BST) circuit. Featuring a perpendicular PCB mounting orientation and a clean non-LED housing design, it integrates Ethernet signal isolation transformers, common-mode chokes, and Auto-MDIX logic into a compact top-entry jack, delivering 1500Vrms isolation and ESD transient protection for embedded mainboards, I/O controllers, security alarms, and routers.
- 180° Vertical Top-Entry Non-LED Orientation: Perpendicular board mount design allows Ethernet cables to plug in vertically from the top, providing a clean non-LED profile ideal for internal embedded boards or sealed enclosures.
- Integrated Magnetics Architecture: 8p8c vertical RJ45 connector integrated with a 4-core transformer/choke matrix (1CT:1CT turns ratio) to eliminate discrete PHY magnetics and save PCB real estate.
- Built-In Circuit Protection & Noise Rejection: Features an integrated Bob Smith Termination (BST) network and Auto-MDIX support for enhanced common-mode EMI suppression and automatic cable crossover detection.
- Direct Cross-Reference Replacement: Fully qualified footprint and electrical drop-in replacement for Premier Magnetics RJ-180A03A for BOM cost optimization and secondary sourcing.
LINK-PP LPJD0011DNL Vertical RJ45 Magjack Connector Overview
LINK-PP LPJD0011DNL is a 180-degree vertical top-entry 1x1 non-LED RJ45 integrated connector module (ICM) designed for Fast Ethernet networking platforms requiring perpendicular cable insertion. Housing 10/100 Base-T signal transformers, common-mode chokes, and Bob Smith Termination within a single compact THT jack, this connector simplifies motherboard layout. It serves as a fully qualified, pin-compatible secondary-source alternative to Premier Magnetics RJ-180A03A in embedded mainboards, industrial I/O controllers, security alarm panels, and network routers.
Key Benefits of LINK-PP LPJD0011DNL / Premier RJ-180A03A Compatible Magjack
- Vertical 180° Top-Entry Architecture: Enables perpendicular RJ45 cable insertion from above the PCB, making it ideal for top-facing embedded mainboard controllers, internal diagnostic headers, and low-profile vertical chassis.
- Non-LED Streamlined Housing Design: Eliminates LED light leakage and simplifies front-panel cutout designs, reducing component complexity for applications where visual status LEDs are unnecessary.
- Fully Integrated Magjack Architecture (ICM): Embeds 4-core 10/100 Base-T isolation transformers, common-mode chokes, resistors, and capacitors inside the vertical connector frame, reducing SMT component count and board footprint.
- Integrated Bob Smith Termination (BST) & Auto-MDIX: Built-in 75-ohm BST circuit routes common-mode EMI noise and ESD transients safely to ground, while Auto-MDIX logic enables automatic straight-through or crossover cable detection.
- T-Post Mechanical Retention for Top Mating Force: Equipped with T-Post PCB retaining pegs that lock into FR4 substrates, absorbing vertical cable insertion and extraction forces without straining solder joints.
- Direct Second Sourcing for Premier Magnetics RJ-180A03A: Identical vertical PCB hole pattern and pinout allow seamless drop-in secondary sourcing to reduce procurement lead times.
Vertical 180° Top-Entry Architecture & Signal Isolation
The LINK-PP LPJD0011DNL utilizes a specialized 180° Vertical Top-Entry Integrated Connector Module (ICM) architecture designed for applications where side-entry horizontal RJ45 jacks are impractical due to enclosure wall geometry or user access angles.
10/100 Base-T Magnetics & Perpendicular Cable Insertion
Featuring a 1CT:1CT transmit and receive turns ratio with 4 magnetic cores per port, the LPJD0011DNL provides 1500Vrms galvanic isolation between the PHY transceiver chip and the external network line. The vertical internal routing connects the top-entry 8p8c contacts to the bottom through-hole solder pins via a shielded internal PCB, maintaining clean Fast Ethernet eye diagrams and low insertion loss.
Bob Smith Termination (BST) & Common-Mode Rejection
The integrated Bob Smith Termination (BST) network utilizes built-in resistors and capacitors to balance line impedance on unused cable pairs. This prevents common-mode noise reflection, suppresses radiated EMI emissions, and enhances system ESD immunity during cable connection.
PCB Mounting & Mechanical Specifications
Designed for standard Through-Hole Technology (THT) wave soldering on FR4 substrates, the LPJD0011DNL incorporates robust mechanical features for top-entry cable stability.
T-Post Strain Relief & Compact Vertical Package
With package dimensions of 16.90mm H x 16.70mm L x 16.00mm W, the LPJD0011DNL provides a compact vertical footprint. T-Post mechanical pegs anchor the housing firmly to the motherboard during cable plugging, ensuring long-term mechanical reliability on embedded boards.
Target Applications: Embedded Mainboards, I/O Controllers, and Alarms
Combining 10/100 Base-T Fast Ethernet speed, 180° vertical top-entry geometry, BST noise suppression, and Premier Magnetics RJ-180A03A compatibility, the LINK-PP LPJD0011DNL supports diverse embedded systems:
- Embedded Mainboards & Single Board Computers (SBCs): Ideal for industrial single-board computers, embedded mainboard diagnostic ports, and internal maintenance Ethernet jacks.
- I/O Controllers & Industrial Automation Modules: Deployed in industrial PLC I/O expansion modules, smart building automation controllers, and fieldbus interfaces.
- Security Alarm Panels & Network Routers: Suitable for commercial security alarm control panels, embedded Ethernet routers, and industrial gateways.
How to Select and Verify LPJD0011DNL vs. Premier RJ-180A03A
Hardware design engineers and procurement teams evaluating the LINK-PP LPJD0011DNL as a second-source replacement for Premier Magnetics RJ-180A03A should verify the following core parameters:
- 180° Vertical PCB Footprint & Pinout: Confirm that the 8p8c vertical through-hole pin arrangement and T-Post peg locations match the Premier Magnetics RJ-180A03A PCB land pattern.
- Non-LED Configuration Check: Verify that your system enclosure design does not rely on integrated LEDs inside the RJ45 jack housing.
- Vertical Clearance & Package Height: Verify that the 16.90mm package height fits within your top enclosure faceplate cutout and vertical clearance budget.
- Magnetics Turns Ratio & Speed: Ensure that a 1CT:1CT turns ratio and 10/100 Base-T Fast Ethernet speed satisfy your PHY transceiver reference design.
Frequently Asked Questions
Is LINK-PP LPJD0011DNL compatible with Premier Magnetics RJ-180A03A?
Yes. LINK-PP LPJD0011DNL is a direct 100% functional, electrical, and footprint drop-in replacement for Premier Magnetics RJ-180A03A, featuring the same 180-degree vertical top-entry 10/100 Base-T Magjack layout without LEDs.
What is the mounting orientation of LINK-PP LPJD0011DNL?
LINK-PP LPJD0011DNL features a 180-degree vertical top-entry orientation, allowing Ethernet cables to plug in perpendicularly from above the PCB.
Does LINK-PP LPJD0011DNL include integrated status LEDs?
No. LPJD0011DNL is a Non-LED vertical RJ45 Magjack variant, designed for applications where visual LED status indicators are not required.
What is the function of the integrated Bob Smith Termination (BST) circuit?
The integrated Bob Smith Termination (BST) circuit utilizes built-in resistors and capacitors to balance line impedance on unused cable pairs, suppressing common-mode EMI noise and protecting the Ethernet PHY against ESD transients.
What contact gold plating options are available for LPJD0011DNL?
LINK-PP offers LPJD0011DNL with gold plating thickness options of Gold 6u", 15u", or 30u" in the contact mating area to meet different insertion durability and corrosion resistance specifications.
Does LINK-PP LPJD0011DNL support Power over Ethernet (PoE)?
No. LPJD0011DNL is a Non-PoE Fast Ethernet vertical Magjack designed strictly for signal isolation and transmission without DC power delivery.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































