HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJD0012DNL不带灯.jpg
  • 8p不带灯 (2)(1711436851793).jpg
  • 8p不带灯(1711436851788).jpg
  • LPJD0012DNL不带灯1.jpg
  • LPJD0012DNL不带灯2.jpg

MJ0012DNL Compatible LINK-PP LPJD0012DNL 10/100Base-T Without LED Vertical RJ45 Sockets

P/N:

LPJD0012DNL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJD0012DNL

  • Number of Ports: 1X1
  • Speed: 10Base-T,100Base-TX
  • PoE: Non-PoE
  • Latch: Up
  • LED Option: No LEDs
  • Shield EMI Tabs: NO
  • Temperature: 0℃ to 70℃
  • P/N: LPJD0012DNL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: MJ0012DNL

Packaging Details:

N.W/pCS:

0.008kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

1000pcs

Carton size:

32*30*31cm

G.W/carton:

7.5kg

Product Specifications

LINK-PP Part Number: LPJD0012DNL Part Number MJ0012DNL
Part Status Active Connector Type Jack
Number of Positions/Contacts 8p8c (RJ45, Ethernet) Application-Lan Ethernet(NoN PoE)
Number of Ports 1x1 Port Speed 10/100 Base-T
Latch Up Cores per Port 4
Orientation 180° Angle (Right) PCB Mount Angle THT Solder
Shield EMI Tabs Without LED Option Without
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.665/16.90 Package Length (Inches/mm) 0.657/16.70
Package Width (Inches/mm) 0.630/16.00 Temperature 0℃ TO 70℃
Bst Circuit Yes AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

MJ0012DNL Compatible LINK-PP LPJD0012DNL Vertical Non-LED RJ45 Magjack Technical Overview

The LINK-PP LPJD0012DNL (engineered as a direct 100% pin-to-pin drop-in replacement for MJ0012DNL) is a single-port (1x1) 180° vertical top-entry non-LED RJ45 Integrated Connector Module (ICM) with built-in 10/100 Base-T magnetics and a Bob Smith Termination (BST) circuit. Featuring a perpendicular PCB mounting orientation and a clean non-LED housing design, it integrates Ethernet signal isolation transformers, common-mode chokes, and Auto-MDIX logic into a compact top-entry jack, delivering 1500Vrms isolation and ESD transient protection for game controllers, surgical equipment, Ethernet controls, and monitoring systems.

  • 180° Vertical Top-Entry Non-LED Orientation: Perpendicular board mount design allows Ethernet cables to plug in vertically from the top, providing a clean non-LED profile ideal for internal embedded boards or sealed enclosures.
  • Integrated Magnetics Architecture: 8p8c vertical RJ45 connector integrated with a 4-core transformer/choke matrix (1CT:1CT turns ratio) to eliminate discrete PHY magnetics and save PCB real estate.
  • Built-In Circuit Protection & Noise Rejection: Features an integrated Bob Smith Termination (BST) network and Auto-MDIX support for enhanced common-mode EMI suppression and automatic cable crossover detection.
  • Direct Cross-Reference Replacement: Fully qualified footprint and electrical drop-in replacement for MJ0012DNL for BOM cost optimization and secondary sourcing.

LINK-PP LPJD0012DNL Vertical RJ45 Magjack Connector Overview

LINK-PP LPJD0012DNL is a 180-degree vertical top-entry 1x1 non-LED RJ45 integrated connector module (ICM) designed for Fast Ethernet networking platforms requiring perpendicular cable insertion. Housing 10/100 Base-T signal transformers, common-mode chokes, and Bob Smith Termination within a single compact THT jack, this connector simplifies motherboard layout. It serves as a fully qualified, pin-compatible secondary-source alternative to MJ0012DNL in game controllers, surgical medical consoles, embedded Ethernet controls, and monitoring systems.

Key Benefits of LINK-PP LPJD0012DNL / MJ0012DNL Compatible Magjack

  • Vertical 180° Top-Entry Architecture: Enables perpendicular RJ45 cable insertion from above the PCB, making it ideal for top-facing game controller motherboards, surgical equipment consoles, and low-profile vertical chassis.
  • Non-LED Streamlined Housing Design: Eliminates LED light leakage and simplifies front-panel cutout designs, reducing component complexity for applications where visual status LEDs are unnecessary.
  • Fully Integrated Magjack Architecture (ICM): Embeds 4-core 10/100 Base-T isolation transformers, common-mode chokes, resistors, and capacitors inside the vertical connector frame, reducing SMT component count and board footprint.
  • Integrated Bob Smith Termination (BST) & Auto-MDIX: Built-in 75-ohm BST circuit routes common-mode EMI noise and ESD transients safely to ground, while Auto-MDIX logic enables automatic straight-through or crossover cable detection.
  • T-Post Mechanical Retention for Top Mating Force: Equipped with T-Post PCB retaining pegs that lock into FR4 substrates, absorbing vertical cable insertion and extraction forces without straining solder joints.
  • Direct Second Sourcing for MJ0012DNL: Identical vertical PCB hole pattern and pinout allow seamless drop-in secondary sourcing to reduce procurement lead times.

Vertical 180° Top-Entry Architecture & Signal Isolation

The LINK-PP LPJD0012DNL utilizes a specialized 180° Vertical Top-Entry Integrated Connector Module (ICM) architecture designed for applications where side-entry horizontal RJ45 jacks are impractical due to enclosure wall geometry or user access angles.

10/100 Base-T Magnetics & Perpendicular Cable Insertion

Featuring a 1CT:1CT transmit and receive turns ratio with 4 magnetic cores per port, the LPJD0012DNL provides 1500Vrms galvanic isolation between the PHY transceiver chip and the external network line. The vertical internal routing connects the top-entry 8p8c contacts to the bottom through-hole solder pins via a shielded internal PCB, maintaining clean Fast Ethernet eye diagrams and low insertion loss.

Bob Smith Termination (BST) & Common-Mode Rejection

The integrated Bob Smith Termination (BST) network utilizes built-in resistors and capacitors to balance line impedance on unused cable pairs. This prevents common-mode noise reflection, suppresses radiated EMI emissions, and enhances system ESD immunity during cable connection.

PCB Mounting & Mechanical Specifications

Designed for standard Through-Hole Technology (THT) wave soldering on FR4 substrates, the LPJD0012DNL incorporates robust mechanical features for top-entry cable stability.

T-Post Strain Relief & Compact Vertical Package

With package dimensions of 16.90mm H x 16.70mm L x 16.00mm W, the LPJD0012DNL provides a compact vertical footprint. T-Post mechanical pegs anchor the housing firmly to the motherboard during cable plugging, ensuring long-term mechanical reliability on game controllers and medical consoles.

Target Applications: Game Controllers, Surgical Equipment, and Monitoring Systems

Combining 10/100 Base-T Fast Ethernet speed, 180° vertical top-entry geometry, BST noise suppression, and MJ0012DNL compatibility, the LINK-PP LPJD0012DNL supports diverse embedded systems:

  • Game Controllers & Arcade Consoles: Ideal for interactive gaming controllers, arcade cabinets, and gaming peripherals requiring top-access network connections.
  • Surgical & Medical Diagnostic Equipment: Deployed in operating room surgical control consoles, patient diagnostic displays, and medical imaging devices.
  • Embedded Ethernet Controls & Monitoring Systems: Suitable for industrial control panels, DIN-rail automation controllers, and building management gateways.

How to Select and Verify LPJD0012DNL vs. MJ0012DNL

Hardware design engineers and procurement teams evaluating the LINK-PP LPJD0012DNL as a second-source replacement for MJ0012DNL should verify the following core parameters:

  • 180° Vertical PCB Footprint & Pinout: Confirm that the 8p8c vertical through-hole pin arrangement and T-Post peg locations match the MJ0012DNL PCB land pattern.
  • Non-LED Configuration Check: Verify that your system enclosure design does not rely on integrated LEDs inside the RJ45 jack housing.
  • Vertical Clearance & Package Height: Verify that the 16.90mm package height fits within your top enclosure faceplate cutout and vertical clearance budget.
  • Magnetics Turns Ratio & Speed: Ensure that a 1CT:1CT turns ratio and 10/100 Base-T Fast Ethernet speed satisfy your PHY transceiver reference design.

Frequently Asked Questions

Is LINK-PP LPJD0012DNL compatible with MJ0012DNL?

Yes. LINK-PP LPJD0012DNL is a direct 100% functional, electrical, and footprint drop-in replacement for MJ0012DNL, featuring the same 180-degree vertical top-entry 10/100 Base-T Magjack layout without LEDs.

What is the mounting orientation of LINK-PP LPJD0012DNL?

LINK-PP LPJD0012DNL features a 180-degree vertical top-entry orientation, allowing Ethernet cables to plug in perpendicularly from above the PCB.

Does LINK-PP LPJD0012DNL include integrated status LEDs?

No. LPJD0012DNL is a Non-LED vertical RJ45 Magjack variant, designed for applications where visual LED status indicators are not required.

What is the function of the integrated Bob Smith Termination (BST) circuit?

The integrated Bob Smith Termination (BST) circuit utilizes built-in resistors and capacitors to balance line impedance on unused cable pairs, suppressing common-mode EMI noise and protecting the Ethernet PHY against ESD transients.

What contact gold plating options are available for LPJD0012DNL?

LINK-PP offers LPJD0012DNL with gold plating thickness options of Gold 6u", 15u", or 30u" in the contact mating area to meet different insertion durability and corrosion resistance specifications.

Does LINK-PP LPJD0012DNL support Power over Ethernet (PoE)?

No. LPJD0011DNL is a Non-PoE Fast Ethernet vertical Magjack designed strictly for signal transmission and isolation without DC power delivery.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.