HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJD0017BBNL左绿右黄8p2.jpg
  • LPJD0017BBNL左绿右黄8p1.jpg
  • LPJD0017BBNL左绿右黄8p3.jpg
  • LPJD0017BBNL左绿右黄8p4.jpg
  • LPJD0017BBNL左绿右黄8p.jpg

LPJD0017BBNL 10/100 Base-T Green/Yellow LED Vertical Integrated RJ45 Connector

P/N:

LPJD0017BBNL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJD0017BBNL

  • Compatible Brands: LINK-PP
  • Number of Ports: 1X1
  • Speed: 10Base-T,100Base-TX
  • PoE: Non-PoE
  • Latch: Up
  • Mounting Type: THT
  • LED Option: Green / Yellow
  • Shield EMI Tabs: NO
  • Temperature: 0℃ to 70℃
  • P/N: LPJD0017BBNL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LPJD0017BBNL

Packaging Details:

N.W/pCS:

0.008kg

Package:

Tray

SPQ:

54pcs

Qty/carton:

1296pcs

Carton size:

36.5*33*32cm

G.W/carton:

10kg

Product Specifications

LINK-PP Part Number: LPJD0017BBNL Connector Type Jack
Part Status Active Mounting Type Through Hole
Number of Positions/Contacts 8p8c (RJ45, Ethernet) Application-Lan Ethernet(Non-PoE)
Number of Ports 1x1 Port Speed 10/100 Base-T
Latch Up Cores per Port 4
Orientation 180° Angle (Right) PCB Mount Angle THT Solder
Shield EMI Tabs Without LED Option Green/Yellow
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.657/16.70 Package Length (Inches/mm) 0.665/16.90
Package Width (Inches/mm) 0.636/16.15 Temperature 0℃ TO 70℃
Bst Circuit Yes AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

Product Engineering Overview

LINK-PP LPJD0017BBNL is a vertical 8P8C RJ45 connector with integrated 10/100 Base-T magnetics and green/yellow indicators. The product record specifies one port, through-hole mounting and Non-PoE operation. A top-entry connector changes the plug approach compared with a board-edge side-entry part, so check cable bend and enclosure clearance.

Drawing LP14022735 Rev A shows a 16.15 mm width, 16.90 mm length and 16.70 mm height. The record and drawing specify a 0°C to 70°C component operating range.

Part: LPJD0017BBNL
Interface: 10/100 Base-T
Ports: 1×1
Mounting: Vertical, through hole
Temperature: 0°C to 70°C
PoE: Non-PoE

Design Positioning and Qualification

When evaluating this part for a similar design, compare the top-entry geometry, board hole pattern, transformer and LED pinouts, and enclosure clearance with the current connector. No third-party equivalent is asserted in this product record.

Procurement and OEM Qualification

Request samples by LINK-PP part number and drawing revision. Confirm the contact plating option, packaging and availability before AVL approval; fit samples to the production board and enclosure and test the interface before release.

Topology and Physical Packaging

  • Interface: One 8P8C RJ45 port with integrated magnetics.
  • Insertion: Vertical top-entry plug approach.
  • Attachment: Through-hole signal and LED pins with retaining features.
  • Shield: The product record specifies a shield without external EMI tabs.
  • Indicators: The drawing shows green on the left and yellow on the right in its top view.

Magnetics and Electrical Interface

Drawing LP14022735 Rev A specifies 1CT:1CT TX and RX transformer ratios and shows center taps and a termination network. It lists 1500 Vrms hipot and minimum 350 µH inductance at 100 kHz, 100 mV and 8 mA DC bias. Confirm the applicable drawing and test conditions for the selected part.

Mechanical Envelope and PCB Layout Considerations

  • Cable access: Allow vertical insertion and a suitable cable bend radius above the connector.
  • Footprint: Compare signal, LED, shield and retaining holes against the suggested layout.
  • Enclosure: Check connector height and latch access in the assembled equipment.
  • LED drive: The drawing shows green pins 12/11 and yellow pins 9/10; verify polarity and current limiting against the host circuit.

Design Consideration Comparison

Connector orientation Engineering consideration
Vertical top entry Requires clearance above the board for the plug and cable.
Right-angle side entry Requires board-edge and panel access; exact geometry depends on the selected part.

Application Considerations

Target Application Profile Primary Engineering Consideration
LAN-on-motherboard equipment Check top clearance, PHY connection and board hole pattern.
10/100 Ethernet hub or switch Check cable access and LED visibility in the enclosure.
SOHO modem equipment Check temperature range and shield connection in the host assembly.

Engineering Verification Checklist

  1. Compare transformer pins and center taps with the PHY schematic.
  2. Check the complete through-hole footprint and tolerances.
  3. Verify the shield and retaining-post mounting arrangement.
  4. Test plug insertion and cable clearance in the enclosure.
  5. Verify LED polarity and current limiting.
  6. Test system isolation, signal integrity and temperature.

Frequently Asked Questions

What Ethernet interface does LPJD0017BBNL support?

The record specifies a single 10/100 Base-T RJ45 port with integrated magnetics.

What is the main layout difference from a side-entry jack?

The plug enters vertically, so the board and enclosure must provide clearance above the connector and a suitable path for the cable.

Which LED pins are shown in the drawing?

LP14022735 Rev A shows green on pins 12/11 and yellow on pins 9/10. Confirm polarity and size the current-limiting circuit using the actual host supply.

What temperature range is specified?

The component range is 0°C to 70°C. Check the finished system separately.

Does LPJD0017BBNL support PoE?

The product record specifies Non-PoE. Select a suitably rated connector and magnetics for a PoE system.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.