LPJD0152BFNL 10/100 Base-T RJ45 Vertical Female Connector With POE Green/Green LED
P/N:
LPJD0152BFNL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LPJD0152BFNL
- Compatible Brands: LINK-PP
- Number of Ports: 1X1
- Speed: 10Base-T,100Base-TX
- PoE: PoE
- Latch: Up
- Mounting Type: THT
- LED Option: Green / Green
- Shield EMI Tabs: NO
- Temperature: 0℃ to 70℃
- P/N: LPJD0152BFNL
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LPJD0152BFNL
Packaging Details:
N.W/pCS:
0.008kg
Package:
Tray
SPQ:
50pcs
Qty/carton:
1000pcs
Carton size:
32*30*31cm
G.W/carton:
8kg
Product Specifications
| LINK-PP Part Number: | LPJD0152BFNL | Connector Type | Jack |
| Part Status | Active | Mounting Type | Through Hole |
| Number of Positions/Contacts | 10p8c (RJ45, Ethernet) | Application-Lan | Ethernet(PoE) |
| Number of Ports | 1x1 Port | Speed | 10/100 Base-T |
| Latch | Up | Cores per Port | 4 |
| Orientation | 180° Angle (Right) | PCB Mount Angle | THT Solder |
| Shield EMI Tabs | Without | LED Option | Green/Green |
| PCB | FR4 | PCB Retaining Post | T POST |
| Package Height (Inches/mm) | 0.665/16.90 | Package Length (Inches/mm) | 0.657/16.70 |
| Package Width (Inches/mm) | 0.636/16.15 | Temperature | 0℃ TO 70℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | No | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
LINK-PP LPJD0152BFNL Vertical PoE 10/100 Base-T RJ45 Female Connector Technical Overview
The LINK-PP LPJD0152BFNL is an industrial-grade single-port (1x1) 180° vertical top-entry female RJ45 Integrated Connector Module (ICM) with built-in IEEE 802.3af Power over Ethernet (PoE) 10/100 Base-T magnetics, Green/Green status LEDs, and a Bob Smith Termination (BST) circuit. Featuring a perpendicular PCB mounting orientation and a 10p8c pinout, it integrates Fast Ethernet signal isolation transformers and common-mode chokes, delivering 10/100 Mbps data transmission, 15.4W DC power supply delivery, 1500Vrms isolation, and ESD protection for SMPS power units, Industrial PCs, machine inverters, and routers.
- 180° Vertical Top-Entry Orientation: Perpendicular board mount design allows Ethernet cables to plug in vertically from the top, solving spatial constraints in top-access SMPS units, machine inverters, and industrial PC enclosures.
- IEEE 802.3af PoE Compliance: Engineered to carry up to 15.4W DC supply current alongside 10/100 Mbps Fast Ethernet data over Cat5e/Cat6 wiring without magnetic transformer saturation.
- Integrated Magnetics Architecture: 10p8c RJ45 connector integrated with a 4-core transformer/choke matrix (1CT:1CT turns ratio) to eliminate discrete PHY magnetics and save PCB real estate.
- Built-In Circuit Protection & Noise Rejection: Features an integrated Bob Smith Termination (BST) network and Auto-MDIX logic for enhanced common-mode EMI suppression and automatic cable crossover detection.
LINK-PP LPJD0152BFNL Vertical PoE RJ45 Magjack Connector Overview
LINK-PP LPJD0152BFNL is a 180-degree vertical top-entry 1x1 female RJ45 integrated connector module (ICM) designed for PoE (IEEE 802.3af 15.4W) Fast Ethernet networking platforms requiring perpendicular cable insertion. Housing signal transformers, common-mode chokes, Green/Green visual status LEDs, and Bob Smith Termination within a single compact THT jack, this connector simplifies motherboard layout. It provides a highly reliable, pin-compatible solution for switched-mode power supplies (SMPS), industrial PCs, motor inverters, and embedded routers.
Key Benefits of LINK-PP LPJD0152BFNL Vertical PoE RJ45 Connector
- Vertical 180° Top-Entry Architecture: Enables perpendicular RJ45 cable insertion from above the PCB, making it ideal for top-facing SMPS power modules, industrial mainboards, and low-profile vertical chassis.
- IEEE 802.3af Power over Ethernet (PoE 15.4W) Capability: Delivers up to 15.4W of DC power to connected Powered Devices (PDs), eliminating external power adapters for remote sensors and industrial endpoints.
- Fully Integrated Magjack Architecture (ICM): Embeds 4-core 10/100 Base-T isolation transformers, common-mode chokes, resistors, and capacitors inside the vertical connector frame, reducing SMT component count and board footprint.
- Integrated Green/Green Visual Status LEDs: Dual Green LED indicators provide clear visual diagnostics for network link establishment and power delivery status.
- Integrated Bob Smith Termination (BST) & Auto-MDIX: Built-in 75-ohm BST circuit routes common-mode EMI noise and ESD transients safely to ground, while Auto-MDIX logic supports automatic straight-through or crossover cable detection.
- T-Post Mechanical Retention for Top Mating Force: Equipped with T-Post PCB retaining pegs that lock into FR4 substrates, absorbing vertical cable insertion and extraction forces without straining solder joints.
Vertical 180° Top-Entry Architecture & PoE Signal Isolation
The LINK-PP LPJD0152BFNL utilizes a specialized 180° Vertical Top-Entry Integrated Connector Module (ICM) architecture designed for applications where side-entry horizontal RJ45 jacks are impractical due to enclosure wall geometry or user access angles.
4-Core Fast Ethernet PoE Magnetics & Perpendicular Insertion
Featuring a 1CT:1CT transmit and receive turns ratio with 4 magnetic cores per port, the LPJD0152BFNL establishes 1500Vrms galvanic isolation between the PHY transceiver chip and the external network line. The internal transformer windings are specially rated to handle DC PoE bias currents without magnetic core saturation, maintaining clean Fast Ethernet eye diagrams and low insertion loss.
Bob Smith Termination (BST) & Common-Mode Rejection
The integrated Bob Smith Termination (BST) network utilizes built-in resistors and capacitors to balance line impedance on unused cable pairs. This prevents common-mode noise reflection, suppresses radiated EMI emissions, and enhances system ESD immunity during cable connection.
PCB Mounting & Mechanical Specifications
Designed for standard Through-Hole Technology (THT) wave soldering on FR4 substrates, the LPJD0152BFNL incorporates robust mechanical features for top-entry cable stability.
10p8c Pinout & Compact Vertical Package
With package dimensions of 16.90mm H x 16.70mm L x 16.15mm W, the LPJD0152BFNL provides a compact vertical footprint. Integrated Green/Green LEDs provide clear visual link status and activity diagnostics, while T-Post mechanical pegs anchor the housing firmly to the motherboard during cable plugging.
Target Applications: SMPS Units, Industrial PCs, and Machine Inverters
Combining 10/100 Base-T Fast Ethernet speed, IEEE 802.3af PoE power delivery, 180° vertical top-entry geometry, and BST noise suppression, the LINK-PP LPJD0152BFNL supports diverse embedded systems:
- Switched-Mode Power Supplies (SMPS) & Power Modules: Ideal for intelligent SMPS power supplies, digital power controllers, and PoE-enabled power gateways.
- Industrial PCs (IPC) & Single Board Computers: Deployed in industrial single-board computers, DIN-rail automation controllers, and embedded mainboards.
- Machine Inverters & Industrial Motor Drives: Suitable for variable-frequency drives (VFD), machine inverters, and industrial automation equipment.
How to Select and Verify LINK-PP LPJD0152BFNL RJ45 Magjack
Hardware design engineers and procurement specialists evaluating the LINK-PP LPJD0152BFNL for new designs or second-source qualification should verify the following core parameters:
- IEEE 802.3af PoE Power Budget: Confirm that a 15.4W PoE power budget and 4-core 10/100BASE-TX magnetics layout match your Powered Device (PD) power supply schematic.
- 180° Vertical PCB Footprint & Pinout: Confirm that the 10p8c vertical through-hole pin arrangement and T-Post peg locations match your PCB land pattern.
- Green/Green LED Driving Polarity: Confirm that the dual Green LED configuration and pin polarity match your host SMT LED driving circuit.
- Vertical Clearance & Package Height: Verify that the 16.90mm package height fits within your top enclosure faceplate cutout and vertical clearance budget.
Frequently Asked Questions
What is LINK-PP LPJD0152BFNL?
LINK-PP LPJD0152BFNL is a single-port (1x1) 180-degree vertical top-entry female RJ45 Magjack featuring integrated PoE (IEEE 802.3af 15.4W) 10/100 Base-T magnetics, Green/Green status LEDs, an integrated Bob Smith Termination circuit, and an operating temperature range of 0°C to 70°C.
Does LINK-PP LPJD0152BFNL support Power over Ethernet (PoE)?
Yes. LPJD0152BFNL is fully compliant with IEEE 802.3af Power over Ethernet (PoE) standards, delivering DC power up to 15.4W alongside 10/100 Mbps Fast Ethernet data transmission.
What is the mounting orientation of LINK-PP LPJD0152BFNL?
LINK-PP LPJD0152BFNL features a 180-degree vertical top-entry orientation, allowing Ethernet cables to plug in perpendicularly from above the PCB.
What is the function of the integrated Bob Smith Termination (BST) circuit?
The integrated Bob Smith Termination (BST) circuit utilizes built-in resistors and capacitors to balance line impedance on unused cable pairs, suppressing common-mode EMI noise and protecting the Ethernet PHY against ESD transients.
What LED options are available on LPJD0152BFNL?
LPJD0152BFNL features integrated dual Green (Green/Green) status LEDs to provide visual link speed and activity diagnostics.
What applications are suitable for vertical PoE RJ45 Magjacks like LPJD0152BFNL?
Vertical top-entry PoE RJ45 Magjacks are ideal for switched-mode power supply (SMPS) units, industrial PC mainboards, machine inverters, and top-access control panels where side-entry cable insertion is restricted.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































