LPJK8003CNL Tab Down RJ45 MagJack Low Profile 1000 Base-T Without Led
P/N:
LPJK8003CNL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LPJK8003CNL
- Compatible Brands: LINK-PP
- Number of Ports: 1X1
- Speed: 1000Base-T
- PoE: Non-PoE
- Latch: Down
- Mounting Type: THT
- LED Option: No LEDs
- Shield EMI Tabs: YES
- Temperature: 0℃ to 70℃
- P/N: LPJK8003CNL
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LPJK8003CNL
Packaging Details:
N.W/pCS:
0.01kg
Package:
Tray
SPQ:
50pcs
Qty/carton:
1200pcs
Carton size:
40*32*33cm
G.W/carton:
11.5kg
Product Specifications
| LINK-PP Part Number | LPJK8003CNL | Connector Type | Jack |
| Part Status | Active | Mounting Type | Through Hole |
| Number of Positions/Contacts | 12p8c (RJ45, Ethernet) | Application-Lan | Ethernet(Non-PoE) |
| Number of Ports | 1x1 Port | Speed | 10/100/1000 Base-T |
| Latch | Down | Cores per Port | 8 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | SIDE ENTRY |
| Shield EMI Tabs | With | LED Option | Without |
| PCB | FR4 | PCB Retaining Post | T POST |
| Package Height (Inches/mm) | 0.445/11.30 | Package Length (Inches/mm) | 0.950/24.13 |
| Package Width (Inches/mm) | 0.700/17.78 | Temperature | 0℃ TO 70℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | No | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
Product Engineering Overview
LINK-PP LPJK8003CNL combines a single 1000 Base-T RJ45 opening with integrated magnetics in a side-entry PCB-mounted assembly. The product record lists a Tab Down latch and no integrated LEDs.
The record specifies Non-PoE operation and an operating range of 0°C to 70°C. The existing specification table lists 10/100/1000 Base-T while the title uses a narrower speed description; confirm the applicable product revision and supported modes. Its listed body dimensions are 17.78 × 24.13 × 11.30 mm; check the board and enclosure together when arranging the connector.
Design Positioning and Qualification
For a comparable Ethernet design, check the complete magnetic pinout, board footprint, shield connection and enclosure clearance against the applicable drawing. No third-party equivalent is specified in this product record.
Procurement and OEM Qualification
Specify LPJK8003CNL and the applicable drawing revision when requesting samples. Confirm plating, packaging and availability before AVL approval, then validate the connector on the production PCB and in the intended enclosure.
Topology and Physical Packaging
- Interface: One RJ45 port with integrated magnetics.
- Mounting: PCB-mounted side-entry assembly.
- Latch: Tab Down; check access after enclosure assembly.
- Indicators: no integrated LEDs.
- Envelope: The record lists 17.78 × 24.13 × 11.30 mm; check the applicable drawing and tolerances.
Magnetics and Electrical Interface
The product table lists a 1CT:1CT turns ratio for RX/TX and specifies Ethernet interfaces supporting AutoMDX operation. Match the applicable pinout and center taps to the selected PHY, and confirm isolation and other electrical requirements in the product documentation.
Mechanical Envelope and PCB Layout Considerations
- Access: Allow plug insertion and latch-release clearance at the board edge.
- Footprint: Match signal, shield and retaining holes to the applicable drawing.
- Shield: Review shield and PCB clearance requirements in the host grounding design.
- Indicators: The product record specifies no integrated LEDs. Provide external indicators if the host equipment requires them.
Design Consideration Comparison
| Architecture | Engineering consideration |
|---|---|
| Integrated magnetics RJ45 | The selected connector determines the combined board footprint and magnetic pinout. |
| Discrete connector and magnetics | Component placement and routing depend on the selected connector, transformer and PHY. |
Application Considerations
| Target Application Profile | Primary Engineering Consideration |
|---|---|
| Ethernet equipment | Verify PHY compatibility, signal routing and the board footprint. |
| Enclosed network equipment | Check shield connection, plug access and connector clearance. |
Engineering Verification Checklist
- Compare the PHY interface and transformer pinout with the applicable schematic.
- Check the complete board footprint and board fabrication tolerances.
- Verify shield and retaining-post connections.
- Test mating and latch access in the finished enclosure.
- Verify whether separate status indicators are needed.
- Validate isolation, signal integrity and temperature in the assembled system.
Frequently Asked Questions
Which Ethernet speeds are listed for LPJK8003CNL?
The existing product record specifies 1000 Base-T. Available link modes depend on the host PHY and system configuration.
What should be checked when selecting LPJK8003CNL?
For a comparable Ethernet design, check the complete magnetic pinout, board footprint, shield connection and enclosure clearance against the applicable drawing. No third-party equivalent is specified in this product record.
What does the side-entry orientation mean for the layout?
Allow plug insertion and latch-release clearance at the board edge. Check the entire footprint and mechanical tolerances against the applicable drawing.
What is the listed component operating range?
The product record lists 0°C to 70°C. Assess the finished system separately.
Does the connector contain status LEDs?
The product record specifies no integrated LEDs. Provide external indicators if the host equipment requires them.
Does LPJK8003CNL support PoE?
The product record specifies Non-PoE. Select a solution rated for the required PoE standard when power over Ethernet is needed.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































