LPJK7036A98NL 1000 Base-T Low-Profile RJ45 Mag Jack Tab Up Orange&Green/Yellow LED
P/N:
LPJK7036A98NL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LPJK7036A98NL
- Compatible Brands: LINK-PP
- Number of Ports: 1X1
- Speed: 1000Base-T,100Base-TX,10Base-T
- PoE: Non-PoE
- Latch: Up
- LED Option: Orange&Green / Yellow
- Shield EMI Tabs: YES
- Temperature: 0℃ to 70℃
- P/N: LPJK7036A98NL
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LPJK7036A98NL
Packaging Details:
N.W/pCS:
0.01kg
Package:
Tray
SPQ:
50pcs
Qty/carton:
1200pcs
Carton size:
40*32*33cm
G.W/carton:
11.5kg
Product Specifications
| LINK-PP Part Number | LPJK7036A98NL | Connector Type | Jack |
| Part Status | Active | Mounting Type | Through Hole |
| Number of Positions/Contacts | 8p8c (RJ45, Ethernet) | Application-Lan | Ethernet(NoN PoE) |
| Number of Ports | 1x1 Port | Speed | 10/100/1000 Base-T |
| Latch | Up | Cores per Port | 8 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | SIDE ENTRY |
| Shield EMI Tabs | With | LED Option | Orange&Green/Yellow |
| PCB | FR4 | PCB Retaining Post | T POST |
| Package Height (Inches/mm) | 0.445/11.30 | Package Length (Inches/mm) | 0.946/24.04 |
| Package Width (Inches/mm) | 0.700/17.78 | Temperature | 0℃ TO 70℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | No | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
LINK-PP LPJK7036A98NL 10/100/1000Base-T Low-Profile RJ45 Jack
Engineered to resolve severe vertical clearance constraints in next-generation edge devices, the LINK-PP LPJK7036A98NL is a high-performance, ultra-low-profile (11.30mm height) single-port RJ45 modular jack. Designed to support robust 10/100/1000Base-T (Gigabit Ethernet) throughput, this integrated connector consolidates the physical network interface, advanced 8-core magnetic isolation transformers, and active diagnostic LEDs into a single, highly compact shielded housing. Operating safely within a commercial temperature envelope of 0°C to 70°C, it provides an exceptional non-PoE physical layer interface for thin-client smart cameras, slim edge routers, and space-constrained IoT controllers.
Manufactured under strict ISO9001 and ISO14001 quality management systems, the LPJK7036A98NL guarantees full adherence to IEEE 802.3, UL, REACH, and RoHS regulatory standards. By integrating complex data transmission circuitry and galvanic isolation into this low-clearance form factor, hardware architects can drastically reduce printed circuit board (PCB) footprint requirements while maintaining pristine Gigabit signal integrity.
Low-Profile Mechanical Architecture & EMI Shielding
The mechanical envelope of the LPJK7036A98NL is meticulously designed to support modern hardware enclosures where vertical space is the most critical constraint.
- Ultra-Low Profile Form Factor: With a height of just 11.30mm (0.445 inches), this connector is perfectly suited for compact smart cameras, high-density 1U blade servers, and miniaturized consumer electronics.
- Port Configuration: Single-port 1x1, extended 8P8C RJ45 interface, Tab-Up orientation for positive, tactile cable latching.
- Mounting Profile: 90-degree right-angle (side entry) utilizing robust Through-Hole Technology (THT) soldering. Reinforced with a dedicated T-post retaining structure designed to absorb the mechanical stress of frequent cable insertions.
- EMI Containment: Enclosed in a heavy-duty metal shield equipped with active EMI grounding tabs. These tabs make direct electrical contact with the metallic chassis bezel, aggressively containing high-frequency electromagnetic interference (EMI) and safely shunting electrostatic discharge (ESD).
- Visual Diagnostics: Equipped with sophisticated Tri-color (Orange & Green / Yellow) LEDs, providing immediate, port-level visual feedback for Gigabit link status and network activity.
Integrated Gigabit Magnetics & Signal Integrity
Embedding the Ethernet isolation circuitry directly within the low-profile RJ45 housing provides vital board-level benefits over traditional discrete magnetic layouts.
- 8-Core Gigabit Magnetics: Internal transformers and common-mode chokes utilize an 8-core topology, precision-tuned for 1000Base-T transmission frequencies. This ensures maximum signal fidelity, minimized return loss, and aggressive suppression of common-mode noise.
- Galvanic Isolation: Delivers standard-compliant high-voltage electrical isolation between the external twisted-pair network and the sensitive internal Gigabit PHY transceiver, guarding against destructive ground loops and voltage transients.
- AutoMDIX Support: The internal 1CT:1CT transformer architecture fully supports AutoMDIX protocols, allowing the physical layer to automatically detect and correct straight-through or crossover cable configurations without manual intervention.
Hardware Layout & Routing Considerations
To extract maximum Gigabit performance from the LPJK7036A98NL, PCB layout engineers must strictly adhere to 100-ohm differential pair impedance matching between the Ethernet PHY and the RJ45 pins. Trace lengths must be meticulously length-matched to prevent phase skew. Additionally, it is critical to verify that the chassis ground (tied to the connector's EMI tabs) is physically isolated from the motherboard's digital ground plane to prevent capacitive noise coupling.
Typical Applications
Fusing an ultra-low-profile mechanical envelope with uncompromised Gigabit signal integrity, the LPJK7036A98NL is the optimal interconnect solution for slim, high-throughput electronics:
- Smart Home & Vision Systems: Low-profile smart IP cameras, biometric access panels, and high-definition networked video surveillance nodes.
- Networking Infrastructure: High-density compact edge routers, slimline network switches, and ultra-thin patch panels.
- Consumer & Entertainment: High-end game controllers, interactive kiosks, and low-latency digital streaming appliances.
- New Energy & IoT: Smart grid telemetry modules, thin-client IoT edge gateways, and centralized environmental monitoring controllers.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































