Belfuse L830-1J1T-43 Compatible LINK-PP LPJK7036A98NL10/100/1000 Base-T Orange&Green/Yellow LED Tab Up Low-Profile RJ45 Patch Panel Jack
P/N:
LPJK7036A98NL
Manufacturer:
LINK-PP
Compatible Brand:
Belfuse
Compatible P/N:
LPJK7036A98NL
- Compatible Brands: Belfuse
- Number of Ports: 1X1
- Speed: 1000Base-T,100Base-TX,10Base-T
- PoE: Non-PoE
- Latch: Up
- LED Option: Orange&Green / Yellow
- Shield EMI Tabs: YES
- Temperature: 0℃ to 70℃
- P/N: LPJK7036A98NL
- Manufacturer: LINK-PP
- Compatible Brand: Belfuse
- Compatible P/N: L830-1J1T-43
Packaging Details:
N.W/pCS:
0.01kg
Package:
Tray
SPQ:
50pcs
Qty/carton:
1200pcs
Carton size:
40*32*33cm
G.W/carton:
11.5kg
Product Specifications
| LINK-PP Part Number: | LPJK7036A98NL | Belfuse Part Number | L830-1J1T-43 |
| Part Status | Active | Connector Type | Jack |
| Number of Positions/Contacts | 8p8c (RJ45, Ethernet) | Application-Lan | Ethernet(NoN PoE) |
| Number of Ports | 1x1 Port | Speed | 10/100/1000 Base-T |
| Latch | Up | Cores per Port | 8 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | SIDE ENTRY |
| Shield EMI Tabs | With | LED Option | Orange&Green/Yellow |
| PCB | FR4 | PCB Retaining Post | T POST |
| Package Height (Inches/mm) | 0.445/11.30 | Package Length (Inches/mm) | 0.946/24.04 |
| Package Width (Inches/mm) | 0.700/17.78 | Temperature | 0℃ TO 70℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | No | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
Belfuse L830-1J1T-43 Compatible LINK-PP LPJK7036A98NL 10/100/1000Base-T Low-Profile RJ45 Jack
Engineered for next-generation, space-constrained edge networking devices, the LINK-PP LPJK7036A98NL is a high-performance, low-profile (11.30mm height) single-port RJ45 modular jack with integrated magnetics. Designed to support robust 10/100/1000Base-T (Gigabit Ethernet) throughput, this connector consolidates the physical network interface and 8-core magnetic isolation transformers into a single, ultra-compact shielded housing. Operating safely within a commercial temperature range of 0°C to 70°C, it provides an exceptional non-PoE physical layer interface for slim-profile smart cameras, patch panels, and compact routers.
Manufactured under stringent ISO9001 and ISO14001 quality management protocols, the LPJK7036A98NL guarantees full adherence to IEEE 802.3, UL, REACH, and RoHS regulatory standards. By integrating data transmission and galvanic isolation into a low-clearance form factor, hardware architects can drastically reduce printed circuit board (PCB) real estate requirements without compromising Gigabit signal integrity.
Belfuse L830-1J1T-43 Cross-Reference & BOM Optimization
Developed as an exact form-fit-function compatible replacement for the Belfuse L830-1J1T-43, the LPJK7036A98NL empowers procurement teams and hardware engineers to secure their supply chains against component shortages. Delivering an identical PCB footprint, matched electrical impedance, and an equivalent 8P8C pin-out configuration, this cross-reference component acts as a seamless drop-in solution. This enables rapid integration into existing layouts without the costly overhead of board respins or recertification delays.
Low-Profile Mechanical Architecture & EMI Shielding
The mechanical envelope of the LPJK7036A98NL is meticulously optimized to resolve clearance challenges in modern, ultra-slim hardware enclosures.
- Low-Profile Form Factor: Boasting an ultra-low height of just 11.30mm (0.445 inches), this connector is ideal for high-density patch panels, low-clearance blade servers, and miniaturized IoT enclosures.
- Port Configuration: Single-port 1x1, 8P8C extended RJ45 interface, Tab-Up orientation for positive, tactile cable latching.
- Mounting Profile: 90-degree right-angle (side entry) utilizing robust Through-Hole Technology (THT) soldering. Reinforced with a T-post retaining structure designed to absorb the mechanical stress of frequent cable insertions.
- EMI Containment: Enclosed in a rugged metal shield equipped with active EMI grounding tabs. These tabs make direct electrical contact with the metallic chassis bezel, aggressively containing high-frequency electromagnetic interference (EMI) and safely shunting electrostatic discharge (ESD).
- Visual Diagnostics: Equipped with sophisticated Tri-color (Orange & Green/Yellow) LEDs, providing immediate, port-level visual feedback for Gigabit link status and network activity.
Integrated Gigabit Magnetics & Signal Integrity
Embedding the Ethernet isolation circuitry directly within the low-profile RJ45 housing provides vital board-level benefits over discrete magnetic layouts.
- 8-Core Gigabit Magnetics: Internal transformers and common-mode chokes feature an 8-core topology, precision-tuned for 1000Base-T frequencies. This ensures maximum signal fidelity, minimized return loss, and aggressive suppression of common-mode noise on the line.
- Galvanic Isolation: Delivers standard-compliant high-voltage electrical isolation between the external twisted-pair network and the sensitive internal Gigabit PHY transceiver, guarding against ground loops and voltage transients.
- AutoMDIX Support: The internal 1CT:1CT transformer architecture fully supports AutoMDIX protocols, allowing the physical layer to automatically detect and correct straight-through or crossover cable configurations without user intervention.
Hardware Layout & Routing Considerations
To maximize the Gigabit performance of the LPJK7036A98NL, PCB designers must adhere to strict 100-ohm differential pair impedance matching between the Ethernet PHY and the RJ45 connector. Ensure that trace lengths are meticulously matched to prevent phase skew. Additionally, verify that the chassis ground (tied to the connector's EMI tabs) is physically isolated from the motherboard's digital ground plane to prevent capacitive noise coupling.
Typical Applications
Fusing an ultra-low-profile mechanical design with uncompromised Gigabit signal integrity, the LPJK7036A98NL is the optimal interconnect solution for slim, high-performance electronics:
- Smart Home & Vision: Low-profile smart IP cameras, biometric access panels, and high-definition video intercoms.
- Networking Infrastructure: High-density RJ45 patch panels, slim edge routers, and compact network switches.
- Consumer Electronics: High-end game controllers, interactive kiosks, and low-latency streaming appliances.
- New Energy & IoT: Smart grid telemetry modules, thin-client IoT gateways, and centralized environmental monitoring controllers.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































