LPJ19961CNL 10/100Mbps SMT RJ45 POE Magnetics Jack Tab Up Without Led
P/N:
LPJ19961CNL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LPJ19961CNL
- Compatible Brands: LINK-PP
- Number of Ports: 1X1
- Speed: 10Base-T,100Base-TX
- PoE: PoE
- Latch: Up
- Mounting Type: SMT
- LED Option: No LEDs
- Shield EMI Tabs: YES
- Temperature: -40℃ to +85°C
- P/N: LPJ19961CNL
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LPJ19961CNL
Packaging Details:
N.W/pCS:
0.009kg
Package:
Tray
SPQ:
110pcs
Qty/carton:
550pcs
Carton size:
34.534.527cm
G.W/carton:
5.2kg
Product Specifications
| LINK-PP Part Number | LPJ19961CNL | Connector Type | Jack |
| Part Status | Active | Mounting Type | Surface Mount |
| Number of Positions/Contacts | 12p8c (RJ45, Ethernet) | Application-Lan | Ethernet(PoE) |
| Number of Ports | 1x1 Port | Speed | 10/100 Base-T |
| Latch | Up | Cores per Port | 4 |
| Orientation | Right Angle | PCB Mount Angle | 90° |
| Shield EMI Tabs | With | LED Option | Without Led |
| PCB | FR4 | PCB Retaining Post | T POST |
| Package Height (Inches/mm) | 0.453/11.50 | Package Length (Inches/mm) | 0.846/21.60 |
| Package Width (Inches/mm) | 0.614/15.60 | Temperature | -40℃ TO 85℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | No | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
Product Engineering Overview
The LINK-PP LPJ19961CNL is a 10/100BASE-T RJ45 jack with integrated magnetics listed for PoE Ethernet applications. Identify the full LPJ19961CNL part number and its drawing revision in an RFQ or sample request so that the evaluated component and ordered variant refer to the same configuration. Its mechanical configuration combines surface mount mounting with a Tab-Up latch and surface-mount signal terminations without LEDs.
The drawing identifies power and signal connections separately and gives a specific pad pattern. Check the host power input routing and shield connection before treating another SMT jack as an alternate. Keep the approved sample, drawing and host-board review together when considering AVL admission or a production order.
Design Positioning and Qualification
The LPJ19961CNL can be evaluated for existing 10/100BASE-T designs using comparable mechanical and electrical requirements. No specific third-party replacement is established on this page. Qualify the actual host board rather than relying on a presumed standard footprint.
Electrical and Mechanical Integration
- PHY connections: Compare signal pairs, polarity and center-tap connections with the host PHY reference circuit. The passive component does not implement network protocols.
- PCB layout: Use the model-specific recommended footprint, pin-1 datum and clearances. Follow the manufacturer's copper keep-out and clearance requirements.
- Enclosure and indicators: Check latch-release access, cable boots, shield contacts and the specified LED configuration. Size LED current limiting from the driver supply and documented forward voltage.
- Power and environment: PoE is the listed application. Confirm electrical limits and operating conditions within the complete host design.
Procurement and OEM Qualification
Use LPJ19961CNL and the agreed drawing revision on the sample request, BOM and purchase documentation. Evaluate samples on the target board, record electrical and assembly results, and complete the approved-vendor review before production release. Confirm quantities, packaging and the delivery schedule for the actual order rather than assuming lifecycle status establishes availability.
Engineering Verification Checklist
- Confirm the full part number and drawing revision.
- Review all signal pairs, center taps and host PHY connections.
- Verify the footprint, terminal numbering and pin-1 orientation.
- Check panel opening, latch access, LED polarity and shield connections.
- Confirm PoE application requirements and the component operating range.
- Validate samples on the intended board and record the production approval.
Frequently Asked Questions
What is LPJ19961CNL used for?
The LINK-PP LPJ19961CNL is a 10/100BASE-T RJ45 jack with integrated magnetics listed for PoE Ethernet applications. Its mechanical configuration combines surface mount mounting with a Tab-Up latch and surface-mount signal terminations without LEDs.
What distinguishes the power pins from the signal pins on LPJ19961CNL?
The schematic labels dedicated power connections in addition to the Ethernet signal paths. Use those labels and the pin-1 datum to map the host circuit; the presence of PoE connections does not mean the jack contains power-control electronics.
Does LPJ19961CNL support Power over Ethernet (PoE)?
The supplied specification lists PoE application. This is a component selection attribute, not approval of a complete PSE or PD. Verify the model's documented electrical limits, the intended power mode and the complete host power path before production; do not infer a wattage or power class from the label alone.
Does LPJ19961CNL perform AutoMDX switching?
No. It is a passive magnetic component within a connector assembly. The AutoMDX field refers to its use with an Ethernet interface supporting AutoMDX operation; pair detection and switching are functions of the host PHY.
What should be supplied when requesting LPJ19961CNL samples or a quotation?
Provide the complete part number, target quantity, host interface and required drawing revision. Confirm sample configuration, commercial terms and delivery schedule with LINK-PP; this page does not establish stock, MOQ or a fixed lead time.
Does the operating temperature rating qualify the complete host system?
No. The specification lists -40℃ TO 85℃ for this component. Check ambient conditions, assembly heating and the operating limits of the PHY, connector and surrounding electronics on the target equipment.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































