Belfuse L826-1X4T-43-F Compatible LPJK40036AONL 1000 Base-T RJ45 1x4 Port Ethernet Connectors Tab Up Orange&Green/Yellow Led
P/N:
LPJK40036AONL
Manufacturer:
LINK-PP
Compatible Brand:
Belfuse
Compatible P/N:
LPJK40036AONL
- Compatible Brands: Belfuse
- Number of Ports: 1X4
- Speed: 10Base-T,100Base-TX,1000Base-T
- PoE: Non-PoE
- Latch: Up
- LED Option: Orange&Green / Yellow
- Shield EMI Tabs: YES
- Temperature: 0℃ to 70℃
- P/N: LPJK40036AONL
- Manufacturer: LINK-PP
- Compatible Brand: Belfuse
- Compatible P/N: L826-1X4T-43-F
Packaging Details:
N.W/pCS:
0.025kg
Package:
Tray
SPQ:
20pcs
Qty/carton:
400pcs
Carton size:
37*30*30cm
G.W/carton:
10kg
Product Specifications
| LINK-PP Part Number | LPJK40036AONL | Belfuse Part Number | L826-1X4T-43-F |
| Part Status | Active | Connector Type | Jack |
| Number of Positions/Contacts | 12p8c (RJ45, Ethernet) | Application-Lan | Ethernet( NON POE ) |
| Number of Ports | 1x4 Port | Speed | 10/100/1000 Base-T |
| Latch | UP | Cores per Port | 8 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | SIDE ENTRY |
| Shield EMI Tabs | With | LED Option | Orange&Green/Yellow Leds |
| PCB | FR4 | PCB Retaining Post | T POST |
| Package Height (Inches/mm) | 0.482/12.25 | Package Length (Inches/mm) | 1.300/33.02 |
| Package Width (Inches) | 2.292/58.22 | Temperature | 0℃ TO 70℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | No | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
Belfuse L826-1X4T-43-F Compatible LINK-PP LPJK40036AONL 10/100/1000Base-T 1x4 RJ45 Connector
Engineered to maximize horizontal faceplate I/O density while delivering uncompromising signal integrity, the LINK-PP LPJK40036AONL is a high-performance 1x4 (4-port) ganged Gigabit RJ45 modular jack with integrated magnetics. Designed to reliably support full-duplex 10/100/1000Base-T (Gigabit Ethernet) throughput, this integrated MagJack consolidates four physical networking interfaces and their respective 8-core magnetic isolation circuits into a single, unified shielded block. Operating flawlessly within a commercial temperature envelope of 0°C to +70°C, it provides an exceptionally stable, non-PoE physical layer interface for central smart home hubs, multi-channel solar inverters, and high-performance gaming controllers.
Manufactured under stringent ISO9001 and ISO14001 quality management protocols, the LPJK40036AONL guarantees full adherence to IEEE 802.3, UL, REACH, and RoHS regulatory standards. By integrating robust data transmission, active signal conditioning, and galvanic isolation into a streamlined 1x4 ganged form factor, hardware architects can drastically optimize printed circuit board (PCB) real estate and accelerate automated chassis assembly workflows.
Belfuse L826-1X4T-43-F Cross-Reference & BOM Optimization
Developed as an exact form-fit-function compatible replacement for the Belfuse L826-1X4T-43-F, the LPJK40036AONL empowers procurement teams and hardware engineers to secure their component supply chains and mitigate shortages. Delivering an identical PCB footprint, matched electrical impedance, and a precise 12P8C pin-out configuration across all four ports, this cross-reference component acts as a seamless drop-in alternative. It facilitates rapid integration into existing motherboard layouts, completely bypassing the costly engineering overhead and delays associated with board respins or recertification.
High-Density 1x4 Ganged Architecture & EMI Shielding
The mechanical envelope of the LPJK40036AONL is meticulously optimized for spatial efficiency, structural rigidity, and superior electromagnetic compatibility (EMC) across its 58.22mm width.
- 1x4 Port Matrix: Consolidating four Gigabit ports horizontally drastically optimizes PCB real estate. This unified mechanical structure ensures precise port-to-port alignment, eliminating the tolerance stack-up issues associated with mounting four standalone jacks side-by-side.
- Port Configuration: 1x4 ganged, extended 12P8C RJ45 interface, Tab-Up orientation providing positive, tactile cable latching to prevent accidental disconnections in active environments.
- Mounting Profile: 90-degree right-angle (side entry) utilizing robust Through-Hole Technology (THT) soldering. Reinforced with heavy-duty T-post retaining structures designed to absorb the significant mechanical insertion forces applied to wide multi-port blocks.
- EMI Containment: Enclosed in a continuous, heavy-duty metal shield equipped with active EMI grounding tabs. These tabs make direct electrical contact with the metallic chassis bezel, aggressively containing internal high-frequency emissions and blocking external Radio Frequency Interference (RFI).
- Visual Diagnostics: Each port is equipped with integrated Tri-color (Orange & Green) and Yellow LEDs, delivering immediate, localized visual feedback for Gigabit link status and network activity directly at the faceplate.
Integrated Gigabit Magnetics & Signal Integrity
Embedding the Ethernet isolation circuitry directly within the shielded 1x4 housing delivers vital board-level signal integrity benefits for high-speed multi-port arrays.
- 8-Core Gigabit Magnetics: The internal transformers and common-mode chokes utilize an 8-core topology per port, precision-tuned for 1000Base-T transmission. This ensures pristine signal fidelity, minimized return loss, and aggressive suppression of common-mode noise across all four twisted pairs.
- Galvanic Isolation: Delivers standard-compliant high-voltage electrical isolation between the external network cables and the sensitive internal Gigabit PHY transceivers, guarding against ground loops and electrostatic discharge (ESD).
- AutoMDIX Support: The internal 1CT:1CT transformer architecture fully supports AutoMDIX protocols, allowing the physical layer to automatically negotiate and correct straight-through or crossover cable configurations.
Hardware Layout & Routing Considerations
To extract optimal Gigabit performance from the LPJK40036AONL, PCB layout engineers must meticulously route the 100-ohm differential pairs between the multi-channel Ethernet PHYs and the RJ45 pins. Because this is a wide 1x4 ganged configuration, precise attention must be paid to trace length matching across all four ports to prevent phase skew and near-end crosstalk (NEXT). Ensure that the chassis ground (tied to the connector’s EMI tabs) is physically isolated from the motherboard's digital ground plane to prevent capacitive noise coupling along the faceplate.
Typical Applications
Combining reliable commercial-grade thermal performance (0°C to +70°C), robust EMI containment, and a high-density 4-port horizontal footprint, the LPJK40036AONL is purpose-built for multi-channel, bandwidth-intensive electronic equipment:
- Smart Home & Automation: Centralized smart home controllers, building automation hubs, and localized intelligent lighting gateways requiring multiple Gigabit links.
- New Energy & Smart Grid: Advanced solar inverter communication arrays and centralized power monitoring telemetry gateways.
- Consumer & Commercial Electronics: High-end gaming controllers, interactive A/V control centers, and high-bandwidth digital media broadcasting stations.
- Networking Infrastructure: Small to medium business (SMB) edge switches, 4-port Gigabit network bridges, and localized network firewalls.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































