HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • J00-0062NL.jpg
  • J00-0062NL Pulse.jpg
  • conector rj45 jack.jpg
  • rj 45 connector.jpg
  • female rj 45 jacks(1711087828669).jpg

Pulse J00-0062NL Compatible LINK-PP LPJ0050DNL 10 Base-T Tab Down Without Led 1 Port Amp RJ 45 Jack

P/N:

LPJ0050DNL

Manufacturer:

LINK-PP

Compatible Brand:

Pulse

Compatible P/N:

LPJ0050DNL

  • Compatible Brands: Pulse
  • Number of Ports: 1X1
  • Speed: 10Base-T
  • PoE: Non-PoE
  • Latch: Down
  • Mounting Type: THT
  • LED Option: No LEDs
  • Shield EMI Tabs: NO
  • Temperature: 0℃ to 70℃
  • P/N: LPJ0050DNL
  • Manufacturer: LINK-PP
  • Compatible Brand: Pulse
  • Compatible P/N: J00-0062NL

Packaging Details:

N.W/pCS:

0.007kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

1200pcs

Carton size:

32*30*31cm

G.W/carton:

8.5kg

Product Specifications

LINK-PP Part Number LPJ0050DNL Pulse Part Number Equivalent J00-0062NL
Connector Type RJ45 MagJack (Integrated Magnetics) Part Status Active
Number of Positions/Contacts 8P8C (RJ45, Ethernet) Application-LAN Ethernet (Non-PoE)
Number of Ports Single Port (1×1) Speed 10BASE-T
Latch Orientation Down (Tab-Down) Cores per Port 4
Orientation 90° Angle (Right) PCB Mount Angle Side Entry (Through Hole)
Shield EMI Tabs Without EMI Tabs LED Option Without LEDs
PCB Material FR4 PCB Retaining Post T-Post
Package Height (Inches/mm) 0.528 / 13.40 Package Length (Inches/mm) 0.839 / 21.30
Package Width (Inches/mm) 0.626 / 15.90 Operating Temperature 0°C to +70°C (Commercial)
BST Circuit Yes AutoMDX Yes
Diodes No Contact Mating Area Plating Gold 6µ" / 15µ" / 30µ"
Turns Ratio (RX/TX) 1CT:1CT Configuration (RX/TX) T, C

Single-Port 10BASE-T Ethernet RJ45 MagJack (Tab-Down, Side Entry, Without LEDs)

The LINK-PP LPJ0050DNL is a single-port 10BASE-T Ethernet RJ45 integrated connector module (MagJack) engineered in a right-angle, side-entry through-hole format with a Tab-Down latch profile and an unilluminated (LED-free) front face. For hardware design engineers, it consolidates a 4-core magnetic structure, 1CT:1CT turns ratio, integrated Bob Smith termination (BST), and AutoMDX support, ensuring IEEE 802.3 compliant signal isolation and eliminating the routing overhead and crosstalk risks associated with LED drive traces. For procurement and sourcing professionals, the LPJ0050DNL serves as a direct form-fit-function cross-reference to the Pulse J00-0062NL, featuring active lifecycle availability, multiple gold plating options (6µ", 15µ", or 30µ") for cost-effective BOM optimization, and multi-source AVL diversification. For OEM system integrators, its 13.40 mm low-profile housing, tab-less metal shield, and molded T-Post retaining pins deliver seamless installation through tight-tolerance panel cutouts without mechanical snagging across fieldbus systems, solar inverters, game controllers, and digital cameras.

Operating across a commercial temperature range of 0°C to +70°C, the LPJ0050DNL is tailored for non-PoE 10 Mbps communications pathways. Hardware engineering teams should verify the pinout arrangement, PCB drill pattern, front-panel clearance, and PHY transceiver guidelines against the official LINK-PP mechanical drawing prior to volume manufacturing release.

Ethernet Speed: Single-Port 10BASE-T
Latch Orientation: Tab-Down (Bottom Latch)
Direct Cross Reference: Pulse J00-0062NL
LED Configuration: Without LEDs (Unilluminated)
Shield Configuration: Metal Shield (Without EMI Tabs)
Magnetics Architecture: 4-Core Integrated Design

Compatibility and Design Positioning

The LINK-PP LPJ0050DNL is engineered as an electrically and mechanically compatible second-source alternative to the Pulse J00-0062NL. Both components share an 8P8C through-hole footprint, 1CT:1CT turns ratio on transmit and receive channels, Tab-Down latch orientation, 4-core magnetics, a tab-less metal shield, and a non-LED configuration. This high degree of alignment enables engineering and procurement teams to qualify the LPJ0050DNL with minimal board redesign or mechanical re-tooling. Design teams should cross-check the official LINK-PP product drawing for terminal pin coordinates, T-Post hole locations, and panel cutout dimensions to ensure seamless replacement.

Tab-Down Latch and Non-LED Clean Front-Panel Architecture

The combination of a Tab-Down latch, smooth shield profile, and non-LED configuration provides distinct physical and electrical benefits for specialized hardware designs:

  • Unobstructed Ergonomic Latch: Positioning the latch release tab on the bottom edge prevents mechanical interference with upper enclosure bezels, protruding faceplate lips, or adjacent display frames during cable disconnection.
  • Simplified Non-LED Routing: Eliminating integrated LEDs removes four through-hole pins from the PCB footprint, freeing up valuable routing channels on the component layer and preventing high-frequency digital switching noise from coupling into the status lines.
  • Smooth Tab-Less Shield Exterior: The absence of perimeter EMI spring fingers allows the connector to slide cleanly into narrow enclosure slots, plastic bezels, or gasketed cutouts without bending, catching, or tearing surrounding materials.
  • Mechanical T-Post Retention: Molded plastic T-Posts secure the housing to the FR4 PCB, absorbing mechanical insertion and extraction forces to protect electrical solder joints from fatigue and micro-cracking.

Integrated 4-Core 10BASE-T Magnetics and AutoMDX Support

The LPJ0050DNL incorporates an internal 4-core magnetic design (two cores for transmit, two cores for receive) in a T, C configuration. The 1CT:1CT turns ratio ensures universal compatibility with 10BASE-T Ethernet PHYs as well as dual-speed 10/100 transceivers operating in 10 Mbps legacy modes.

The internal circuit integrates a Bob Smith termination (BST) network to damp common-mode reflections and suppress electromagnetic emissions. Galvanic isolation compliant with IEEE 802.3 provides a minimum of 1500Vrms dielectric withstand, safeguarding host silicon from line-side electrical disturbances, ground loops, and cable-discharge events. Full AutoMDX support facilitates automatic cable crossover detection without external switching logic.

Mechanical Envelope and PCB Layout Considerations

When incorporating the LPJ0050DNL into compact enclosures, engineers should address the following structural and layout details:

1. Package Dimensions and Front-Panel Cutout

The connector envelope measures 13.40 mm (0.528 inches) in height, 21.30 mm (0.839 inches) in length, and 15.90 mm (0.626 inches) in width. Because the metal shield lacks external spring fingers, the enclosure cutout can be engineered with tighter tolerances to match the outer body dimensions.

2. Tab-Down Latch Clearance and Field Servicing

Designers should maintain adequate clearance beneath the connector port to ensure field technicians and users have sufficient thumb access to depress the Tab-Down release latch when unplugging the cable assembly.

3. Through-Hole T-Post Anchoring

The molded plastic T-Posts provide mechanical alignment and transfer insertion stresses away from the electrical pins. Solder pad drill sizes and retaining post holes should strictly follow the recommended PCB land pattern drawing.

4. Shield Grounding and Trace Isolation

With no exterior EMI tabs to contact the enclosure wall, chassis grounding relies entirely on the through-hole shield solder pins. These pins should connect directly to a low-impedance chassis ground plane on the PCB. High-speed signal traces should not be routed underneath the connector body.

Architecture Comparison: Single-Port MagJack vs. Alternative Implementations

Evaluation Metric LPJ0050DNL
Tab-Down LED-Free MagJack
Standard Integrated
MagJack with LEDs
Discrete 10BASE-T Magnetics
+ Modular RJ45 Jack
Status Indicators Without LEDs (Clean Face) Integrated LEDs (Bi-color/Single) External LEDs or None
Latch Orientation Tab-Down (Bottom Latch) Typically Tab-Up or Tab-Down Model-dependent
Shield Exterior Profile Smooth (Without EMI Tabs) Typically with EMI Tabs Optional Shielding
PCB Pin Count & Routing Reduced Pin Count (No LED pins) Higher Pin Count (+4 LED pins) Extensive Inter-Chip Routing
SMT/THT Placements Single connector assembly Single connector assembly Two individual placements
Primary Design Focus Low-noise, compact non-LED I/O Front-panel link status display Modular physical placement

Application Considerations for LPJ0050DNL

Target Application Profile Primary Engineering Consideration
Fieldbus Systems & Industrial Gateways 10BASE-T data rate matches low-bandwidth industrial fieldbus communications with robust IEEE 802.3 galvanic isolation.
Solar Inverters & Power Conversion Units Elimination of LED traces reduces electromagnetic susceptibility in high-noise switching environments.
Game Controllers & Arcade Terminals Tab-Down latch prevents accidental cable disconnections caused by upward tugging during operation.
Digital Cameras & Embedded Imaging 13.40 mm low-profile height and tab-less shield allow easy integration into compact, gasket-sealed camera housings.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing procurement for the LPJ0050DNL, hardware engineers should confirm the following technical parameters:

  • Footprint and Pinout Verification: Verify the 8P8C through-hole pin mapping, T-Post hole dimensions, and shield pin locations against the official LINK-PP LPJ0050DNL mechanical drawing.
  • Cross-Reference Validation: Confirm mechanical and electrical compatibility against the Pulse J00-0062NL specification when designing for multi-source qualification.
  • Enclosure Cutout Tolerances: Ensure the front-panel opening matches the smooth, tab-less shield profile and provides sufficient clearance beneath the port for unhindered operation of the Tab-Down latch.
  • PCB Shield Grounding: Confirm that the through-hole shield pins connect to a wide, low-impedance chassis ground trace or copper pour to maintain EMC performance without external EMI fingers.
  • PHY Transceiver Configuration: Verify that the selected Ethernet PHY supports 10BASE-T signaling and operates reliably with the 1CT:1CT magnetic turns ratio.
  • Thermal Operating Window: Confirm that the operating environment inside the chassis remains within the specified 0°C to +70°C commercial temperature range.

Frequently Asked Questions

What are the primary specifications of the LINK-PP LPJ0050DNL?

The LINK-PP LPJ0050DNL is a single-port 10BASE-T RJ45 MagJack featuring an 8P8C contact configuration, 4-core internal magnetics, 1CT:1CT turns ratio, Tab-Down latch orientation, side-entry through-hole mounting, a metal shield without EMI tabs, no LEDs, integrated BST circuit, AutoMDX support, and an operating temperature range of 0°C to +70°C.

Is the LINK-PP LPJ0050DNL compatible with the Pulse J00-0062NL?

Yes. The LPJ0050DNL is designed as an electrically and mechanically compatible second-source alternative to the Pulse J00-0062NL. Both parts share identical 8P8C pinouts, 1CT:1CT turns ratios, Tab-Down latch profiles, smooth shields without EMI tabs, unilluminated front faces, and through-hole PCB footprints. Engineering teams should cross-reference official drawings before volume production.

What are the design advantages of an RJ45 MagJack without integrated LEDs?

An unilluminated MagJack eliminates LED drive pins from the PCB footprint, freeing up board space and routing channels near the board edge. It also prevents high-speed switching noise on LED lines from coupling into sensitive differential Ethernet pairs and simplifies panel designs where status indication is handled by separate display panels or is unnecessary.

Why does the LPJ0050DNL use a metal shield without EMI tabs?

A shield without exterior spring EMI tabs provides a smooth outer surface that easily fits into tight enclosure openings, plastic bezels, or sealed rubber gaskets without catching or bending tabs. Chassis grounding is achieved through dedicated through-hole ground pins soldered directly into the PCB.

Can the LPJ0050DNL be used in Power over Ethernet (PoE) circuits?

No. The LPJ0050DNL is rated for Non-PoE Ethernet applications. Its internal magnetic windings and chokes are designed strictly for 10BASE-T differential data signals and galvanic isolation, and cannot carry the DC currents defined under IEEE 802.3af/at/bt PoE standards.

What are the practical advantages of the Tab-Down latch in industrial and gaming equipment?

The Tab-Down latch places the RJ45 plug release tab on the bottom side of the port. In equipment with protruding upper bezels, control panels, or display hoods, this allows operators to easily access and depress the release tab with their thumb, preventing snags and facilitating quick cable disconnection.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Download

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.