HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJ16251A28NL左绿右黄 (2).jpg
  • 8p.jpg
  • 左绿右黄3(1711086705414).jpg
  • LPJ16251A28NL左绿右黄.jpg
  • 左绿右黄2(1711086705331).jpg

LPJ16251A28NL 10 Base-T Tab Up Single Port Cat5 RJ45 Connector With Green/Yellow Led

P/N:

LPJ16251A28NL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJ16251A28NL

  • Compatible Brands: LINK-PP
  • Number of Ports: 1X1
  • Speed: 10Base-T
  • PoE: Non-PoE
  • Latch: Up
  • Mounting Type: THT
  • LED Option: Green / Yellow
  • Shield EMI Tabs: YES
  • Temperature: 0℃ to 70℃
  • P/N: LPJ16251A28NL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LPJ16251A28NL

Packaging Details:

N.W/pCS:

0.007kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

1200pcs

Carton size:

32*30*31cm

G.W/carton:

8.5kg

Product Specifications

LINK-PP Part Number: LPJ16251A28NL Connector Type Jack
Part Status Active Mounting Type Through Hole
Number of Positions/Contacts 8p8c (RJ45, Ethernet) Application-Lan Ethernet( Non-PoE )
Number of Ports 1x1 Port Speed 10 Base-T
Latch UP Cores per Port 4
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs With LED Option Green/Yellow Leds
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.530/13.45 Package Length (Inches/mm) 0.837/21.25
Package Width (Inches/mm) 0.628/15.95 Temperature 0℃ TO 70℃
Bst Circuit Yes AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

10 Base-T Single-Port RJ45 Magnetic Jack

The LINK-PP LPJ16251A28NL is a 1x1 8P8C RJ45 jack specified for 10 Base-T Ethernet. The supplied specifications identify four cores per port, a 1CT:1CT RX/TX turns ratio, T,C configuration, BST and no diodes. It is specified for Ethernet interfaces supporting AutoMDX operation and for Non-PoE applications.

The right-angle, side-entry through-hole package uses a Tab-Up latch, Green/Yellow LEDs, an FR4 PCB and a T-post retaining feature. Its stated height, length and width are 13.45 mm, 21.25 mm and 15.95 mm. The listed operating range is 0℃ to 70℃; system qualification must also account for enclosure temperature and assembly conditions.

Lifecycle: Active
Speed/Interface: 10 Base-T / 8P8C RJ45
PoE: Non-PoE
Mounting/Latch: Through Hole / Tab-Up
Temperature: 0℃ to 70℃
LED/Shield: Green/Yellow LEDs / With EMI tabs

Design Positioning and Qualification

The LPJ16251A28NL can be considered for existing 10 Base-T designs using comparable mechanical and electrical requirements. No third-party equivalent is asserted on this page. Before substitution, compare the official drawing, magnetics schematic, footprint, pin assignment, LED connections and enclosure clearances.

Procurement and OEM Qualification

Request the applicable drawing and samples for initial evaluation. Review the 10 Base-T interface, Non-PoE requirement, through-hole assembly and component temperature range with the host design. Complete sample testing and AVL approval before NPI release; confirm lead time, packaging and production scheduling for each order.

Topology and Physical Packaging

  • Port arrangement: One 8P8C RJ45 port for the specified 10 Base-T interface.
  • Mounting: Right-angle side-entry through-hole construction requires verification of solder pins and T-post holes.
  • Latch: Tab-Up orientation requires clearance for plug insertion and release.
  • Envelope: Check the 13.45 mm height, 21.25 mm length and 15.95 mm width against the panel and adjacent components.
  • Indicators and shield: Route Green/Yellow LED signals according to the drawing and evaluate EMI-tab connections in the chassis grounding design.

Internal Electrical Architecture

The table lists four cores per port, a 1CT:1CT RX/TX turns ratio and T,C configuration. BST is listed as Yes, AutomDX as YES and diodes as No. The jack itself does not execute AutoMDX switching. Confirm the PHY interface and magnetics schematic using the applicable documentation; isolation voltage, inductance, insertion loss and other unlisted electrical limits are not established by this page.

Mechanical Envelope and PCB Layout Considerations

  1. Envelope and panel: Use the official mechanical drawing to locate the connector mouth and verify panel opening clearances.
  2. Latch access: Confirm Tab-Up operation with the intended cable boot and enclosure.
  3. Footprint and holes: Check solder pins, T-post locations and hole tolerances. Follow the manufacturer's copper keep-out and clearance requirements.
  4. LED routing: Verify polarity, pin allocation and rated current before selecting drive circuitry and limiting resistors.

Design Consideration Comparison

Design Consideration Integrated Magnetic Jack Separate Jack and Magnetics
Board integration Connector and magnetics are selected as one assembly Separate placement and routing are required
Footprint and pinout Model-dependent Configuration-dependent
Electrical qualification Verify the complete assembly with the PHY Verify both parts and their interconnection
PoE suitability LPJ16251A28NL is specified as Non-PoE Configuration-dependent; requires documented ratings

Application Considerations

Target Application Profile Primary Engineering Consideration
Embedded controllers with a 10 Base-T interface Verify PHY compatibility, magnetics pinout and Non-PoE operation.
Panel-mounted Ethernet equipment using a board-mounted jack Check side-entry alignment, Tab-Up access and enclosure clearances.
OEM equipment requiring through-hole connector assembly Validate soldering, T-post fit and the 0℃ to 70℃ component operating range.

Engineering Verification Checklist

  • Identity: Match LPJ16251A28NL on the title, drawing, sample and order.
  • Electrical interface: Check 10 Base-T PHY requirements, turns ratio, configuration and BST connections.
  • Footprint: Verify signal pins, shield connections and T-post hole locations.
  • Mechanical assembly: Confirm the listed dimensions, panel alignment and Tab-Up release space.
  • LED and environment: Test LED drive and assess the component's 0℃ to 70℃ operating conditions.
  • Production release: Confirm Non-PoE use, sample results, AVL approval and supply documentation.

Frequently Asked Questions

What are the primary specifications of the LINK-PP LPJ16251A28NL?

It is an Active, 1x1 8P8C RJ45 jack specified for 10 Base-T, with through-hole mounting, right-angle side entry, Tab-Up latch and Green/Yellow LEDs. The table lists four cores per port, 1CT:1CT turns ratio, T,C configuration, BST and a 0℃ to 70℃ operating range.

Can the LPJ16251A28NL replace another RJ45 jack?

No specific third-party replacement is established here. Match the official footprint, pin assignment, magnetics schematic, LED connections and mechanical drawing before considering substitution.

What clearance is needed for the Tab-Up latch and T-post?

Provide space above the connector for plug release and verify T-post hole locations against the drawing. The 13.45 mm height, 21.25 mm length and 15.95 mm width do not by themselves define the full cable and latch operating clearance.

Does the operating temperature range establish an industrial system rating?

No. The table specifies a component range of 0℃ to 70℃. Confirm local component temperature and the host system's environmental requirements separately; the range does not establish system throughput or reliability.

How should the Green/Yellow LEDs be driven?

Verify polarity, pin assignment, forward voltage and rated current from the applicable documentation. For a resistor-limited drive, calculate R = (Vdrive - Vf - Vswitch) / ILED using documented values and check resistor power and driver limits. This page does not supply numerical LED electrical ratings.

What should be reviewed before volume production?

Review the official drawing, electrical documentation, samples, assembly results and supply requirements. Complete prototype evaluation and AVL approval before production release.

Does the LPJ16251A28NL support Power over Ethernet?

The supplied specification identifies Non-PoE Ethernet applications. A PoE design requires magnetics and a complete system power path explicitly rated for the intended PoE standard; do not infer PoE support from the RJ45 interface.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.