Pulse JC0-0132 Compatible LINK-PP LPJG67547CNL 10/100/1000 Base-T 10p8c Without LED 2x6 Port RJ45 Network Connector
P/N:
LPJG67547CNL
Manufacturer:
LINK-PP
Compatible Brand:
Pulse
Compatible P/N:
LPJG67547CNL
- Compatible Brands: Pulse
- Number of Ports: 2X6
- Speed: 10Base-T,100Base-TX,1000Base-T
- PoE: Non-PoE
- Latch: Both
- LED Option: No LEDs
- Shield EMI Tabs: YES
- Temperature: 0℃ to 70℃
- P/N: LPJG67547CNL
- Manufacturer: LINK-PP
- Compatible Brand: Pulse
- Compatible P/N: JC0-0132
Packaging Details:
N.W/pCS:
0.102kg
Package:
Tray
SPQ:
6pcs
Qty/carton:
108pcs
Carton size:
37*30*30cm
G.W/carton:
11kg
Product Specifications
| LINK-PP Part Number | LPJG67547CNL | Pulse Part Number | JC0-0132 |
| Part Status | Active | Connector Type | Jack |
| Number of Positions/Contacts | 10P8C (RJ45, Ethernet) | Application-LAN | Ethernet (Non-PoE) |
| Number of Ports | 2x6 Port | Speed | 10/100/1000BASE-T |
| Latch | Both | Cores per Port | 8 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | Side Entry |
| Shield EMI Tabs | With | LED Option | Without LEDs |
| PCB | FR4 | PCB Retaining Post | T-Post |
| Package Height (Inches/mm) | 1.015 / 25.79 | Package Length (Inches/mm) | 1.116 / 28.35 |
| Package Width (Inches/mm) | 3.430 / 87.12 | Temperature | 0°C to +70°C |
| BST Circuit | Yes | AutoMDX | Yes |
| Diodes | No | Contact Mating Area Plating | Gold 6µ" / 15µ" / 30µ" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T, C |
Pulse JC0-0132 Compatible Stacked 2x6 Port Gigabit 10/100/1000BASE-T Integrated RJ45 MagJack
The LINK-PP LPJG67547CNL is a high-density stacked 2x6 multi-port integrated RJ45 MagJack engineered for 10/100/1000BASE-T Gigabit Ethernet applications in non-PoE network architectures. For hardware engineers, it integrates 12 Gigabit ports in a dual-row (2-over-6) matrix with 8-core magnetics per port, Bob Smith termination, AutoMDX support, and dual latching within an 87.12 mm wide housing. For OEM and procurement teams, the LPJG67547CNL provides an alternative sourcing option for the Pulse JC0-0132, consolidating 12 physical ports into a single through-hole component to streamline BOM count and manufacturing assembly on high-density switches and routers.
Featuring a 90° right-angle, side-entry through-hole profile, perimeter EMI grounding tabs, T-Post mechanical PCB retention, and an operating temperature range of 0°C to +70°C in a without-LED configuration, the connector is suited for 1U enterprise switches, optical network terminals (ONT), game hardware systems, and automation equipment. Engineering and procurement teams should verify the mechanical drawing, pin assignment, PCB land pattern, and selected PHY documentation before production release.
Pulse JC0-0132 Compatible Design Positioning
The LPJG67547CNL is positioned as a compatible alternative to the Pulse JC0-0132 for 10/100/1000BASE-T Gigabit Ethernet applications, providing hardware engineering and procurement teams with a potential second-source option for designs requiring comparable package dimensions, pinout footprints, and electrical interface characteristics.
To ensure proper integration on existing or new motherboard designs, engineering teams should cross-reference the mechanical drawing, pin assignment, solder pad geometry, and electrical characteristics against original design requirements prior to volume release.
Stacked 2x6 Multi-Port Topology and Front-Panel Space Optimization
High-density multi-port networking equipment requires connector assemblies that maximize port count while maintaining front-panel layout efficiency:
- 12-Port Density Consolidation: Arranging 12 Gigabit ports into a stacked 2x6 matrix occupying 87.12 mm of horizontal board width provides a compact board-edge layout for 24-port or 48-port 1U switches and line cards.
- Manufacturing Assembly Efficiency: Soldering a single 2x6 through-hole component replaces multiple discrete connectors, helping maintain consistent port-to-port alignment and simplifying board assembly workflows.
- Non-PoE Data Architecture: The connector is specified for non-PoE Gigabit Ethernet applications, without dedicated DC power paths for PoE delivery.
Integrated 8-Core Magnetics per Port and AutoMDX Support
Each of the 12 ports incorporates an internal 8-core magnetic structure with a 1CT:1CT turns ratio and T, C configuration. The integrated magnetics provide the electrical interface between the Gigabit Ethernet PHY and the cable-side RJ45 connection while reducing the need for separate discrete magnetic components on the host board.
The connector includes a Bob Smith termination (BST) circuit and supports AutoMDX-compatible Gigabit Ethernet designs. Hardware designers should evaluate the MagJack together with the selected PHY, differential-pair routing, PCB grounding, and system-level EMC requirements.
Mechanical Design and Stacked Stress Distribution
High-port-count stacked connectors introduce specific mechanical and enclosure considerations due to their physical width and multi-cable insertion profile:
1. 2x6 Package Envelope
The connector body measures 25.79 mm (1.015 inches) in height, 28.35 mm (1.116 inches) in length, and 87.12 mm (3.430 inches) in width. Mechanical designers must verify vertical and horizontal clearance within 1U enclosure faceplates.
2. Dual Latch Configuration (Latch: Both)
The connector uses opposing latch orientations, with Tab-Up latches on the upper row of ports and Tab-Down latches on the lower row. This arrangement can improve access to individual plug-release tabs in a stacked 12-port configuration, subject to surrounding enclosure geometry.
3. T-Post Mechanical Retention
Molded T-Post retention features help position and mechanically retain the 87.12 mm wide connector housing on the FR4 PCB. The host PCB design should be evaluated together with the connector solder joints to provide adequate mechanical support during repeated cable insertion, extraction, and handling.
4. Shielding Structure
The connector is wrapped in a metal shield equipped with perimeter EMI grounding tabs designed to interface with the equipment front-panel structure as part of the system-level shielding and grounding design.
5. Without-LED Configuration
The LPJG67547CNL is built in a without-LED configuration, simplifying internal connector routing and allowing system designers to implement separate front-panel light pipes or discrete board-mounted status LEDs.
Architecture Comparison: Stacked 2x6 MagJack vs. Alternative Implementations
| Evaluation Metric | LPJG67547CNL Stacked 2x6 MagJack |
3 x Stacked 2x2 MagJacks |
12 x Single-Port MagJacks |
|---|---|---|---|
| Total Port Count | 12 Ports (2x6 Matrix) | 12 Ports (3 x 4 Ports) | 12 Ports (Discrete) |
| Horizontal Board Width | 87.12 mm (Consolidated) | Model-dependent | Model-dependent |
| Vertical Height Profile | 25.79 mm | 25.79 mm | Typically 13.50 mm |
| Assembly Placements | Single connector assembly | Three individual placements | Twelve individual placements |
| Latch Architecture | Dual Latch (Tab-Up / Tab-Down) | Dual Latch (Both) | Single-direction |
| Primary Design Focus | Maximum port density for 1U switch faceplates | Modular block placement | Custom-spaced port layouts |
Application Considerations for LPJG67547CNL
| Target Application Profile | Primary Engineering Consideration |
|---|---|
| Enterprise 24/48-Port Switches & Routers | Consolidates 12 Gigabit ports per block, streamlining high-density 1U front-panel faceplate layouts. |
| Optical Network Terminals (ONT) & Gateways | Compact 12-port Gigabit interface for multi-tenant and central-office aggregation equipment. |
| Multi-Port Game Hardware & Media Servers | High-throughput 1000BASE-T connectivity, without-LED design for custom front-panel light pipes. |
| Factory Automation & Industrial Control Hubs | T-Post mechanical retention across 87.12 mm width; 0°C to +70°C commercial operating range. |
Engineering Verification Checklist
Before releasing a PCB layout or finalizing a bill of materials (BOM) using the LPJG67547CNL, hardware engineers should confirm the following design parameters against the official product drawing:
- Package Dimensions & Vertical Clearance: Verify the 25.79 mm height, 87.12 mm width, and 28.35 mm length against enclosure height and front-panel cutout dimensions.
- PCB Land Pattern: Check through-hole pad diameters, T-Post hole locations, and shield ground pin drill sizes across the entire 12-port footprint drawing.
- Dual Latch Clearances: Ensure adequate clearance above and below the connector faceplate cutout for both upper (Tab-Up) and lower (Tab-Down) plug latch disengagement.
- PHY Interface & Differential Routing: Verify 12-channel 1000BASE-T differential pair routing, trace length matching, and AutoMDX compatibility with the selected PHY transceivers.
- Thermal Operating Environment: Confirm that the component operating environment remains within the specified 0°C to +70°C range.
- Soldering Process Compatibility: Verify through-hole wave or selective soldering parameters for the large multi-pin 2x6 connector assembly.
Frequently Asked Questions
Is the LINK-PP LPJG67547CNL a compatible alternative to the Pulse JC0-0132?
The LPJG67547CNL is designed as a compatible alternative to the Pulse JC0-0132 with a stacked 2x6 (12-port) Gigabit MagJack configuration, dual latching (Both), without-LED design, 90° right-angle through-hole mounting, T-Post PCB retention, metal shield with EMI tabs, and an operating temperature range of 0°C to +70°C. Engineers should verify the mechanical drawing, pin assignments, and PCB land pattern before production use.
What is the mechanical advantage of a stacked 2x6 connector configuration?
A stacked 2x6 connector arranges 12 Gigabit ports in a dual-row (2-over-6) matrix occupying 87.12 mm of horizontal board width. This consolidated format allows high port density on 1U switch faceplates while simplifying assembly by replacing multiple individual connector placements with a single component.
What does the "Both" latch specification indicate?
The "Both" latch specification indicates that the connector uses dual-direction latching: the top row of six ports features Tab-Up latches, while the bottom row features Tab-Down latches. This orientation can improve access to individual release tabs across the 12-port matrix, subject to surrounding enclosure geometry.
What is the function of the 8-core magnetics per port?
The LPJG67547CNL specifies eight magnetic cores per Ethernet port for its integrated 10/100/1000BASE-T interface with a 1CT:1CT turns ratio and T, C configuration. These magnetic components provide the electrical coupling and isolation between the Gigabit PHY and the cable interface across all 12 ports. Engineers should refer to the product schematic for the exact termination arrangement.
Why is the LPJG67547CNL specified without integrated LEDs?
The without-LED configuration reduces internal connector pin count and PCB routing complexity across the 12-port footprint, giving system designers the freedom to implement custom front-panel light pipes or discrete surface-mount status LEDs on the host motherboard.
Is the LPJG67547CNL suitable for Power over Ethernet (PoE)?
No. The LPJG67547CNL is specified as a Non-PoE connector for data-only Gigabit Ethernet interfaces. For systems requiring PoE or PoE+ power delivery, a MagJack with dedicated PoE-rated magnetics and DC current paths should be selected.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































