HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • IMG_1597.jpg
  • IMG_1607.jpg
  • IMG_1616.jpg
  • IMG_1611.jpg
  • 1(1711013378903).jpg

LPJK9029A159NL 5G Base-T Integrated Magnetics Low Porfile RJ45 Connector Jack 1x1 Port

P/N:

LPJK9029A159NL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJK9029A159NL

  • Compatible Brands: LINK-PP
  • Number of Ports: 1X1
  • Speed: 5GBase-T
  • PoE: Non-PoE
  • Latch: Down
  • Mounting Type: THT
  • Shield EMI Tabs: YES
  • Temperature: 0℃ to 70℃
  • P/N: LPJK9029A159NL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LPJK9029A159NL

Packaging Details:

N.W/pCS:

0.01kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

1200pcs

Carton size:

40*32*33cm

G.W/carton:

12kg

Product Specifications

LINK-PP Part Number: LPJK9029A159NL Connector Type Jack
Part Status Active Mounting Type Through Hole
Number of Positions/Contacts 8p8c (RJ45, Ethernet) Application-Lan Ethernet(NoN PoE)
Number of Ports 1x1 Port Speed 5G Base-T
Latch Down Cores per Port 8
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs With LED Option Yellow&Green/Yellow
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.445/11.30 Package Length (Inches/mm) 0.939/23.85
Package Width (Inches/mm) 0.700/17.78 Temperature 0℃ TO 70℃
Bst Circuit Yes AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

Single-Port 5GBASE-T RJ45 MagJack

The LINK-PP LPJK9029A159NL is a single-port 5G Base-T multi-gigabit Ethernet RJ45 integrated connector module (MagJack) in a right-angle, side-entry through-hole configuration. Designed with an internal 8-core magnetic structure, 1CT:1CT turns ratio, integrated Bob Smith termination (BST), and AutoMDX support, the connector supports IEEE 802.3bz-compliant Ethernet signal isolation and common-mode noise suppression across the specified 0℃ TO 70℃ operating temperature range.

The mechanical assembly features an 11.30 mm (0.445 inches) vertical height, Tab-Down latch orientation, perimeter shield EMI tabs, Yellow&Green/Yellow status LEDs, and molded T-Post retaining pins. With dimensions of 11.30 mm in height, 17.78 mm (0.700 inches) in width, and 23.85 mm (0.939 inches) in length, the LPJK9029A159NL provides a compact physical interface suited for Wi-Fi 6 / 6E wireless access points, high-bandwidth industrial cameras, Network Attached Storage (NAS) systems, and multi-gigabit enterprise edge gateways.

Lifecycle: Active
Ethernet Speed: Single-Port 5G Base-T
Mounting & Latch: Through Hole (THT) / Tab-Down
Housing Height: 11.30 mm (0.445 in)
Operating Temperature: 0℃ TO 70℃ Commercial
Qualification Support: Sample Evaluation / Second Source

Compatibility and Design Positioning

The LPJK9029A159NL can be evaluated as an alternative sourcing option for standard 8P8C single-port 5G Base-T Tab-Down RJ45 MagJack applications. It provides direct design relevance for hardware designs requiring through-hole mounting, an 8-core multi-gigabit magnetic architecture with a 1CT:1CT turns ratio across all four differential pairs, integrated BST termination, an 11.30 mm vertical height, and Yellow&Green/Yellow LED indication. Engineering teams should cross-reference terminal pin assignments, T-Post hole locations, LED drive circuits, and mechanical clearances against the official LINK-PP technical drawing before production release.

Procurement and OEM Qualification

For sourcing teams and OEM engineering programs evaluating the LPJK9029A159NL as a second-source or BOM alternative, key qualification parameters include PCB mechanical footprint, pinout alignment, LED drive characteristics, electrical isolation parameters, operating temperature rating, and expected volume demand. LINK-PP can support sample evaluation, mechanical drawing review, and documentation requirements for prototype validation, AVL qualification, and volume production planning.

Tab-Down Latch Topology and Enclosure Front-Panel Optimization

Integrating 5G Base-T magnetics into an 11.30 mm Tab-Down connector format provides practical packaging and mechanical advantages for high-density networking hardware:

  • Board-Edge Ergonomics: The Tab-Down latch positions the RJ45 plug release latch on the lower edge, preventing mechanical conflict with upper enclosure bezels, display frames, or protruding chassis overhangs during cable disconnection.
  • 11.30 mm Vertical Height: The 11.30 mm (0.445 in) housing height supports space-constrained board-edge and embedded hardware designs where enclosure clearance is strictly limited.
  • 0℃ TO 70℃ Commercial Operating Range: The 0℃ TO 70℃ specification defines the stated operating temperature range of the connector assembly, supporting commercial computing, networking, and multimedia equipment.
  • Perimeter Shield EMI Tabs: Exterior spring tabs establish multi-point contact with the equipment front panel, assisting with chassis-level grounding and shielding continuity at multi-gigabit frequencies.
  • Mechanical T-Post Retention: Molded plastic posts help align the connector during assembly and distribute mechanical insertion and extraction stresses directly into the FR4 PCB substrate.

Internal Magnetics Architecture, 5GBASE-T Multi-Gigabit Signaling, and AutoMDX

The LPJK9029A159NL incorporates an internal 8-core magnetic architecture supporting the four differential pairs required for 5G Base-T full-duplex Ethernet communication. A symmetrical 1CT:1CT turns ratio across transmit and receive stages in a T, C configuration enables broad interface compatibility with standard voltage-mode and current-mode multi-gigabit PHY transceivers.

The integrated magnetics include Bob Smith termination (BST) to help manage common-mode noise, while AutoMDX support enables automatic differential pair crossover detection. Electrical isolation complies with IEEE 802.3 specifications as defined in the product documentation, separating PHY circuitry from line-side transients and cable common-mode noise. The non-PoE data architecture is optimized exclusively for differential high-speed signal transmission without DC bias heating.

Mechanical Envelope and PCB Layout Considerations

When integrating the LPJK9029A159NL into host hardware layouts, engineering teams should account for the following structural and electrical parameters:

1. Package Dimensions and Front-Panel Cutout

The connector body measures 11.30 mm (0.445 inches) in height, 23.85 mm (0.939 inches) in length, and 17.78 mm (0.700 inches) in width. Front-panel openings must be designed with appropriate clearances to allow unhindered deflection of the perimeter EMI spring tabs.

2. Tab-Down Latch Headroom

Because the release latch is oriented on the bottom face, designers should provide adequate clearance beneath the connector port to ensure field technicians can easily depress the plug latch during servicing.

3. Through-Hole T-Post Anchoring

Molded T-Posts position the component securely on the PCB. Verification of drill hole diameters and tolerance spacing against the official footprint drawing is essential to ensure proper mechanical seating and solder joint reliability.

4. Yellow&Green/Yellow Status LED Circuitry

The connector features a bi-color Yellow&Green indicator on one side and a single Yellow indicator on the other. Hardware engineers should implement suitable series current-limiting resistors matching the host PHY LED driver polarity and target forward current specifications.

Design Consideration Comparison: Integrated MagJack vs. Discrete Solution

Design Consideration LPJK9029A159NL
Integrated 5G MagJack
Discrete 5G Magnetics
+ Modular RJ45 Jack
Component Integration 5G magnetics and RJ45 connector integrated in one housing Separate magnetic transformer and modular RJ45 jack
PCB Assembly Operations Single through-hole placement Multiple placements (SMD transformer + through-hole jack)
Board-Edge Layout Consolidated footprint at board edge Requires trace routing between discrete magnetics and connector
Vertical Height Envelope Fixed 11.30 mm profile Variable based on selected modular jack profile
Front-Panel Shielding Integrated metal shield with perimeter EMI tabs Dependent on chosen external RJ45 shield design
Primary Engineering Focus Compact layout, unified assembly, standard 5G Base-T I/O Custom physical placement flexibility across board zones

Application Considerations for LPJK9029A159NL

Target Application Profile Primary Engineering Consideration
Multi-Gigabit Wi-Fi 6 Access Points & Routers Supports 5 Gbps uplinks exceeding standard 1G bottlenecks on existing Cat5e/Cat6 structured cabling.
High-Bandwidth Industrial & Machine Vision Cameras 11.30 mm vertical height fits compact camera housings while delivering 5 Gbps data streams for high-resolution imaging.
Network Attached Storage (NAS) & Media Servers Provides high-throughput multi-gigabit connectivity for commercial data backup, virtualization, and multimedia streaming.
Enterprise Edge Gateways & Workstations Consolidates 5G Base-T magnetics and status LEDs into a unified through-hole footprint to conserve component-layer board space.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing a bill of materials using the LPJK9029A159NL, hardware engineers should confirm the following design parameters against official documentation:

  • Footprint and Pinout Verification: Verify 8P8C pinout, LED pin locations, and T-Post drill sizes against the official LINK-PP LPJK9029A159NL drawing.
  • Tab-Down Headroom Clearance: Confirm that the enclosure cutout provides sufficient clearance beneath the port for cable plug latch engagement and release.
  • LED Drive Polarity and Resistors: Check the host PHY LED driver configuration and select appropriate series resistors for the bi-color Yellow&Green and single Yellow LEDs.
  • Chassis Grounding Path: Verify that the PCB shield pins connect to a low-impedance chassis ground plane to support front-panel EMI tab performance.
  • PHY Magnetics Compatibility: Confirm that the 1CT:1CT turns ratio and BST termination topology align with the transceiver manufacturer's reference schematic.
  • Thermal Environment: Ensure that the operating environment inside the equipment chassis remains within the specified 0℃ TO 70℃ commercial temperature range.

Frequently Asked Questions

What are the primary specifications of the LINK-PP LPJK9029A159NL?

The LPJK9029A159NL is a single-port 5G Base-T Ethernet(NoN PoE) RJ45 MagJack. It features an 8P8C contact configuration, 8-core internal magnetics, 1CT:1CT turns ratio, Tab-Down latch orientation, side-entry through-hole mounting, Yellow&Green/Yellow LEDs, an 11.30 mm (0.445 inches) height profile, integrated BST circuit, AutoMDX support, and an operating temperature range of 0℃ TO 70℃.

Can the LPJK9029A159NL be evaluated as an alternative sourcing option in existing designs?

Yes. The LPJK9029A159NL can be evaluated as an alternative sourcing option for standard 8P8C 5G Base-T Tab-Down RJ45 MagJacks. Engineering teams should cross-reference pinout mapping, package dimensions (11.30 mm height, 23.85 mm length, 17.78 mm width), LED drive requirements, and mechanical clearances against official manufacturer drawings before approving component substitution.

What are the engineering benefits of the 11.30 mm height profile?

An installed height of 11.30 mm (0.445 inches) provides a low vertical envelope compared to standard RJ45 connectors. This supports space-constrained designs such as low-profile add-in cards, compact Wi-Fi access points, and slim industrial camera housings where vertical chassis clearance is strictly limited.

How does the Tab-Down latch orientation affect front-panel design?

A Tab-Down latch positions the RJ45 plug release latch on the underside of the connector. This orientation avoids mechanical interference with upper enclosure bezels, display frames, or protruding chassis lips, making it easier for technicians to disconnect network cables in compact equipment.

How are the Yellow&Green and Yellow LEDs driven on the host PCB?

The connector includes a bi-color Yellow&Green indicator on one side and a single Yellow indicator on the other. The LED functions should be configured according to the host PHY reference design and the connector's electrical specifications. Depending on the selected LED control scheme, the indicators may be used for link speed, link status, or activity indication.

Is the LPJK9029A159NL suitable for Power over Ethernet (PoE) applications?

No. The LPJK9029A159NL is specified as an Ethernet(NoN PoE) connector for data-only 5G Base-T interfaces. For applications requiring PoE power delivery, a connector and magnetics solution specifically rated for the required PoE standard and DC current conditions should be selected.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.