HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJK7036A98NL.jpg
  • LPJK7036A98NL1.jpg
  • 3(1711012944234).jpg
  • 2(1711012944224).jpg
  • 4(1711012944203).jpg

BelFuse L830-1J1T-43 Compatible LPJK7036A98NLS 1G Base-T RJ45 Low Profile Connector With Magnetics Tab Up Orange&Green/Yellow LED

P/N:

LPJK7036A98NLS

Manufacturer:

LINK-PP

Compatible Brand:

BelFuse

Compatible P/N:

LPJK7036A98NLS

  • Compatible Brands: Belfuse
  • Number of Ports: 1X1
  • Speed: 10Base-T,100Base-TX,1000Base-T
  • PoE: Non-PoE
  • Latch: Up
  • LED Option: Orange&Green / Yellow
  • Shield EMI Tabs: YES
  • Temperature: 0℃ to 70℃
  • P/N: LPJK7036A98NLS
  • Manufacturer: LINK-PP
  • Compatible Brand: BelFuse
  • Compatible P/N: L830-1J1T-43

Packaging Details:

N.W/pCS:

0.01kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

1200pcs

Carton size:

40*32*33cm

G.W/carton:

11.5kg

Product Specifications

LINK-PP Part Number: LPJK7036A98NLS BelFuse Part Number L830-1J1T-43
Part Status Active Connector Type Jack
Number of Positions/Contacts 12p8c (RJ45, Ethernet) Application-Lan Ethernet(NoN PoE)
Number of Ports 1x1 Port Speed 10/100/1000 Base-T
Latch Up Cores per Port 8
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs With LED Option Orange&Green/Yellow
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.445/11.30 Package Length (Inches/mm) 0.957/24.30
Package Width (Inches/mm) 0.701/17.80 Temperature 0℃ TO 70℃
Bst Circuit Yes AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

BelFuse L830-1J1T-43 Compatible LINK-PP LPJK7036A98NLS 10/100/1000Base-T Low-Profile RJ45 Connector

Engineered to solve severe clearance constraints in modern, ultra-slim networking and imaging devices, the LINK-PP LPJK7036A98NLS is a high-performance, low-profile (11.30mm height) single-port RJ45 modular jack. Designed for robust 10/100/1000Base-T (Gigabit Ethernet) throughput, this integrated connector consolidates the physical I/O interface, advanced 8-core magnetic isolation transformers, and visual diagnostic LEDs into a single, compact shielded housing. Operating within a commercial temperature envelope of 0°C to 70°C, it delivers an uncompromising non-PoE physical layer interface for smart cameras, edge routers, and space-constrained IoT hardware.

Manufactured under strict ISO9001 and ISO14001 quality management protocols, the LPJK7036A98NLS guarantees full compliance with IEEE 802.3, UL, REACH, and RoHS regulatory directives. By integrating galvanic isolation directly into this ultra-low-clearance form factor, hardware architects can drastically reduce printed circuit board (PCB) footprint requirements while maintaining pristine Gigabit signal integrity.

BelFuse L830-1J1T-43 Cross-Reference & BOM Optimization

Developed as an exact form-fit-function compatible replacement for the BelFuse L830-1J1T-43, the LPJK7036A98NLS empowers procurement teams and hardware engineers to secure their supply chains and optimize their Bill of Materials (BOM). Delivering identical mechanical dimensions, matched electrical impedance, and an equivalent 12P8C pin-out configuration, this MagJack serves as a seamless drop-in solution. This enables rapid integration into existing motherboard layouts without the costly overhead of board respins or recertification delays.

Ultra-Low-Profile Architecture & EMI Shielding

The mechanical envelope of the LPJK7036A98NLS is meticulously designed to support next-generation hardware where vertical space is the most critical constraint.

  • Low-Profile Form Factor: With an ultra-low height of just 11.30mm (0.445 inches), this connector is perfectly suited for compact smart cameras, low-clearance rackmount appliances, and miniaturized consumer electronics.
  • Port Configuration: Single-port 1x1, extended 12P8C RJ45 interface, Tab-Up orientation providing positive, tactile cable latching.
  • Mounting Profile: 90-degree right-angle (side entry) utilizing robust Through-Hole Technology (THT) soldering. Reinforced with a dedicated T-post retaining structure designed to absorb the mechanical stress of frequent cable insertions.
  • EMI Containment: Enclosed in a heavy-duty metal shield equipped with active EMI grounding tabs. These tabs make direct electrical contact with the metallic chassis bezel, aggressively containing high-frequency electromagnetic interference (EMI) and safely shunting electrostatic discharge (ESD).
  • Visual Diagnostics: Equipped with sophisticated Tri-color (Orange & Green/Yellow) LEDs, providing immediate, port-level visual feedback for Gigabit link status and network activity.

Integrated Gigabit Magnetics & Signal Integrity

Embedding the Ethernet isolation circuitry directly within the low-profile RJ45 housing provides vital board-level benefits over traditional discrete magnetic layouts.

  • 8-Core Gigabit Magnetics: Internal transformers and common-mode chokes utilize an 8-core topology, precision-tuned for 1000Base-T transmission. This ensures maximum signal fidelity, minimized return loss, and aggressive suppression of common-mode noise.
  • Galvanic Isolation: Delivers standard-compliant high-voltage electrical isolation between the external twisted-pair network and the sensitive internal Gigabit PHY transceiver, guarding against destructive ground loops and voltage transients.
  • AutoMDIX Support: The internal 1CT:1CT transformer architecture fully supports AutoMDIX protocols, allowing the physical layer to automatically detect and correct straight-through or crossover cable configurations without manual intervention.

Hardware Layout & Routing Considerations

To extract maximum Gigabit performance from the LPJK7036A98NLS, PCB designers must strictly adhere to 100-ohm differential pair impedance matching between the Ethernet PHY and the RJ45 pins. Trace lengths must be meticulously length-matched to prevent phase skew. Additionally, it is critical to verify that the chassis ground (tied to the connector's EMI tabs) is physically isolated from the motherboard's digital ground plane to prevent capacitive noise coupling.

Typical Applications

Fusing an ultra-low-profile mechanical envelope with uncompromised Gigabit signal integrity, the LPJK7036A98NLS is the optimal interconnect solution for slim, high-throughput electronics:

  • Smart Home & Vision Systems: Low-profile smart IP cameras, biometric access panels, and high-definition networked video surveillance nodes.
  • Networking Infrastructure: High-density compact edge routers, slimline network switches, and ultra-thin patch panels.
  • Consumer & Entertainment: High-end game controllers, interactive kiosks, and low-latency digital streaming appliances.
  • New Energy & IoT: Smart grid telemetry modules, thin-client IoT edge gateways, and centralized environmental monitoring controllers.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Download

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.