HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJG28818A105NL左绿右白10p带弹加长款.jpg
  • 左绿右白10p带弹加长款.jpg
  • 左绿右白10p带弹加长款1.jpg
  • 10p带弹加长款.jpg
  • LPJG28818A105NL左绿右白10p带弹加长款1.jpg

LPJG28818A105NL RJ45 1x2 Port Magnetic Jacks 1000 Base-T Tab Up Green/Green&Orange Leds

P/N:

LPJG28818A105NL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJG28818A105NL

  • Compatible Brands: LINK-PP
  • Number of Ports: 1X2
  • Speed: 10Base-T,100Base-TX,1000Base-T
  • PoE: Non-PoE
  • Latch: Up
  • Shield EMI Tabs: YES
  • Temperature: 0℃ to 70℃
  • P/N: LPJG28818A105NL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LPJG28818A105NL

Packaging Details:

N.W/pCS:

0.17kg

Package:

Tray

SPQ:

30pcs

Qty/carton:

600pcs

Carton size:

37*30*30cm

G.W/carton:

10kg

Product Specifications

LINK-PP Part Number LPJG28818A105NL Connector Type Jack
Part Status Active Mounting Type Through Hole
Number of Positions/Contacts 10p8c (RJ45, Ethernet) Application-Lan Ethernet(NoN PoE)
Number of Ports 1x2 Port Speed 10/100/1000 Base-T
Latch Up Cores per Port 8
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs With LED Option Green/Green&Orange
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.537/13.65 Package Length (Inches/mm) 0.994/25.25
Package Width (Inches/mm) 1.201/30.50 Temperature 0℃ TO 70℃
Bst Circuit Yes AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

Dual-Port 1x2 10/100/1000BASE-T RJ45 MagJack

The LINK-PP LPJG28818A105NL is a dual-port ganged 1x2 10/100/1000 Base-T Gigabit Ethernet RJ45 integrated connector module (MagJack) in a right-angle, side-entry through-hole configuration. Designed with an internal 8-core-per-port magnetic structure (16 cores total), 1CT:1CT turns ratio, integrated Bob Smith termination (BST), and AutoMDX support, the connector supports Gigabit differential data transmission and common-mode noise suppression across the specified 0℃ TO 70℃ operating temperature range.

The mechanical assembly features a ganged single-row 1x2 port matrix, Tab-Up latch orientation, perimeter shield EMI tabs, Green and bi-color Green&Orange status LEDs for each port, and molded T-Post retaining pins. With dimensions of 13.65 mm (0.537 inches) in height, 30.50 mm (1.201 inches) in width, and 25.25 mm (0.994 inches) in length, the LPJG28818A105NL provides a standardized physical interface suited for network firewalls, switched-mode power supplies (SMPS), industrial PCs (IPCs), intercom systems, and embedded main boards.

Lifecycle: Active
Ethernet Speed: 1x2 Port 10/100/1000 Base-T
Port Configuration: Ganged 1x2 Port (Side-by-Side)
Mounting & Latch: Through Hole (THT) / Tab-Up
Operating Temperature: 0℃ TO 70℃ Commercial
Qualification Support: Sample Evaluation / Second Source

Design Positioning and Qualification

The LPJG28818A105NL is designed as an integrated dual-port RJ45 MagJack for hardware platforms requiring through-hole PCB termination, Gigabit Ethernet data rates, and a horizontal 1x2 ganged configuration. It can be evaluated for new hardware designs, BOM consolidation, or as an alternative sourcing option for existing 10P8C 10/100/1000 Base-T Tab-Up 1x2 designs using comparable mechanical and electrical requirements. Engineering teams should verify pinout mapping, PCB land patterns, LED drive circuits, and mechanical clearances against the official LINK-PP technical drawing before approving production release.

Procurement and OEM Qualification

For procurement teams, sourcing specialists, and OEM hardware programs evaluating the LPJG28818A105NL, qualification activities typically center on BOM qualification, second-source risk mitigation, and production readiness. LINK-PP can support design qualification through mechanical drawing review, sample evaluation, and technical documentation required for prototype validation, approved vendor list (AVL) entry, and volume production planning. Sourcing teams should verify lead-time requirements, applicable packaging requirements, and contact plating selection (6µ", 15µ", or 30µ") based on project lifecycle demands.

Ganged 1x2 Dual-Port Topology and Board-Edge Optimization

Integrating two Gigabit Ethernet ports into a ganged single-row 1x2 connector format provides practical packaging and mechanical layout considerations for hardware systems:

  • Ganged 1x2 Horizontal Consolidation: Integrates two independent Gigabit Ethernet channels into a unified 30.50 mm (1.201 inches) wide housing, cutting component placement operations compared to deploying two separate single-port connectors side-by-side.
  • Board-Edge Ergonomics: The Tab-Up latch positions the RJ45 plug release latch on the upper face, facilitating natural finger access from the top of the chassis without interference from the host PCB surface or bottom enclosure edges.
  • 13.65 mm Vertical Height: The 13.65 mm (0.537 inches) housing height supports space-constrained board-edge and embedded hardware designs where enclosure clearance is limited.
  • 0℃ TO 70℃ Commercial Operating Range: The 0℃ TO 70℃ specification defines the stated operating temperature range of the connector assembly, supporting commercial computing, power systems, and networking appliances.
  • Perimeter Shield EMI Tabs & T-Post Retention: Exterior spring tabs establish multi-point contact with the equipment front panel, while molded plastic T-Posts distribute mechanical insertion and extraction stresses directly into the FR4 PCB substrate.

Internal Magnetics Architecture, Gigabit Signaling, and AutoMDX

The LPJG28818A105NL incorporates an internal 8-core magnetic architecture per port (16 cores total across the 1x2 assembly) supporting the four differential pairs required for 10/100/1000 Base-T full-duplex Ethernet communication. A symmetrical 1CT:1CT turns ratio across transmit and receive stages in a T, C configuration enables broad interface compatibility with standard voltage-mode and current-mode Gigabit PHY transceivers.

The internal assembly includes an integrated Bob Smith termination (BST) circuit to assist with common-mode noise management. The LPJG28818A105NL is specified for Ethernet interfaces supporting AutoMDX operation. Electrical isolation is specified according to the applicable product documentation, separating host circuitry from cable-side common-mode noise. The LPJG28818A105NL is specified for Non-PoE Ethernet applications.

Mechanical Envelope and PCB Layout Considerations

When integrating the LPJG28818A105NL into host hardware layouts, engineering teams should account for the following structural and layout parameters:

1. Package Dimensions and Front-Panel Cutout

The connector body measures 13.65 mm (0.537 inches) in height, 25.25 mm (0.994 inches) in length, and 30.50 mm (1.201 inches) in width. Front-panel openings must be designed with appropriate horizontal clearances to allow unhindered deflection of the perimeter EMI spring tabs across both port bays.

2. Tab-Up Latch Headroom

Because the release latch is oriented on the top face, designers should provide adequate vertical clearance above the connector port to ensure field technicians can easily depress the plug latch during servicing.

3. 10P8C Footprint and Through-Hole Layout

The 10P8C through-hole configuration provides dedicated terminals for Gigabit differential pairs and status LED connections for both ports. Verification of drill hole diameters and tolerance spacing against the official footprint drawing is necessary to support mechanical seating and solder joint reliability. Designers should follow the manufacturer's recommended copper keep-out and clearance requirements on the host PCB.

4. Status LED Circuitry

The connector features Green and bi-color Green&Orange status indicators for each port. Hardware engineers should implement suitable series current-limiting resistors matching the host PHY LED driver polarity and target forward current specifications.

Design Consideration Comparison: Ganged 1x2 MagJack vs. Alternative Layouts

Design Consideration LPJG28818A105NL
Ganged 1×2 Gigabit MagJack
2× Single-Port 1×1
Gigabit MagJacks (Side-by-Side)
Discrete Gigabit Magnetics
+ Modular 1×2 RJ45 Jack
Component Integration Dual-port magnetics and connectors in one housing Two separate integrated MagJack housings Separate discrete magnetic transformers and modular jack
PCB Assembly Operations Single through-hole placement Two individual through-hole placements Multiple placements (SMD transformers + jack)
Horizontal Board Space Consolidated 30.50 mm width (Fixed inter-port spacing) Variable (Requires spacing gap between individual jacks) Consolidated modular footprint
Vertical Height Envelope Fixed 13.65 mm profile ~13.50 mm profile Variable based on selected modular jack profile
Front-Panel Shielding Continuous dual-port shield with perimeter EMI tabs Separate shields per connector Dependent on chosen external RJ45 shield design
Primary Engineering Focus Unified dual-port Gigabit assembly Independent or modular port placement Custom physical placement flexibility

Application Considerations for LPJG28818A105NL

Target Application Profile Primary Engineering Consideration
Network Firewalls & Security Appliances Consolidates two Gigabit Ethernet interfaces in a compact horizontal form factor for WAN/LAN routing.
Switched-Mode Power Supplies (SMPS) & Monitors Integrated Bob Smith termination and robust metal shielding assist with EMI suppression near power conversion stages.
Industrial PCs & Embedded Main Boards 13.65 mm vertical height and Tab-Up latch support compact board-edge layouts on embedded computing platforms.
Intercom Systems & Audio-Visual Gateways Green and bi-color Green&Orange LEDs provide versatile visual indication for link speed, status, and network traffic.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing a bill of materials using the LPJG28818A105NL, hardware engineers should confirm the following design parameters against official documentation:

  • Footprint and Pinout Verification: Verify the 1x2 dual-port through-hole pinout, LED pin locations, and T-Post drill sizes against the official LINK-PP LPJG28818A105NL drawing.
  • Tab-Up Headroom Clearance: Confirm that the enclosure cutout provides sufficient vertical clearance above the ports for cable plug latch engagement and release.
  • LED Drive Polarity and Resistors: Check the host PHY LED driver configuration (active-high or active-low) and select appropriate series resistors for the Green and Green&Orange LEDs on both channels.
  • Chassis Grounding Path: Verify that the PCB shield pins connect to a low-impedance chassis ground plane according to the host system grounding plan.
  • PHY Magnetics Compatibility: Confirm that the 1CT:1CT turns ratio and BST termination topology align with the dual-channel transceiver manufacturer's reference schematic.
  • Thermal Environment: Ensure that the operating environment inside the equipment chassis remains within the specified 0℃ TO 70℃ commercial temperature range.

Frequently Asked Questions

What are the primary specifications of the LINK-PP LPJG28818A105NL?

The LPJG28818A105NL is a dual-port ganged 1x2 10/100/1000 Base-T Gigabit Ethernet(NoN PoE) RJ45 MagJack. It features a 10P8C contact configuration per port, 8-core internal magnetics per port, 1CT:1CT turns ratio, Tab-Up latch orientation, side-entry through-hole mounting, Green/Green&Orange LEDs, integrated BST circuit, AutoMDX support, and an operating temperature range of 0℃ TO 70℃.

Can the LPJG28818A105NL be evaluated as an alternative sourcing option in existing designs?

Yes. The LPJG28818A105NL can be evaluated as an alternative sourcing option for standard 10P8C 1x2 10/100/1000 Base-T Tab-Up RJ45 MagJacks. Engineering teams should cross-reference pinout mapping, package dimensions (13.65 mm height, 25.25 mm length, 30.50 mm width), LED drive requirements, and mechanical clearances against official manufacturer drawings before approving component substitution.

What are the advantages of a ganged 1x2 dual-port MagJack over two single-port jacks?

A ganged 1x2 MagJack integrates two complete Gigabit Ethernet ports into a single housing measuring 30.50 mm (1.201 inches) wide. This unifies through-hole component placement, cuts assembly pick-and-place cycles in half, ensures consistent inter-port spacing, and simplifies front-panel sheet metal bezel design.

How does the Tab-Up latch orientation affect board-edge mechanical design?

A Tab-Up latch positions the RJ45 plug release latch on the upper face of the connector. This orientation is standard for motherboard and daughtercard designs where the PCB is mounted close to the enclosure floor, allowing users to press the latch from above without interference from the chassis lip.

How are the Green and Green&Orange LEDs driven on the host PCB?

The connector includes a Green indicator on one side and a bi-color Green&Orange indicator on the other for each port. The LED functions should be configured according to the host PHY reference design and the connector's electrical specifications. Depending on the selected LED control scheme, the indicators may be used for link speed, link status, or activity indication.

Does the LPJG28818A105NL support Power over Ethernet (PoE)?

No. The LPJG28818A105NL is specified as an Ethernet(NoN PoE) connector for data-only Gigabit network interfaces. For applications requiring PoE power delivery, a connector and magnetics solution specifically rated for the required IEEE 802.3 PoE standard and DC current conditions should be selected.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Download

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.