HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJG29864BANL-2左黄右绿.jpg
  • LPJG29864BANL-2左黄右绿2.jpg
  • 通用1特殊款(1711000692764).jpg
  • LPJG29864BANL-2左黄右绿3.jpg
  • LPJG29864BANL-2左黄右绿1.jpg

LPJG29864BANL-2 10/100/1000 Base-T Tab Up Yellow/Green LED 1x2 Port RJ45 Network Connector

P/N:

LPJG29864BANL-2

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJG29864BANL-2

  • Compatible Brands: LINK-PP
  • Number of Ports: 1X2
  • Speed: 100Base-TX,1000Base-T,10Base-T
  • PoE: Non-PoE
  • Latch: Up
  • LED Option: Yellow / Green
  • Shield EMI Tabs: NO
  • Temperature: -40℃ to +85°C
  • P/N: LPJG29864BANL-2
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LPJG29864BANL-2

Packaging Details:

N.W/pCS:

0.015kg

Package:

Tray

SPQ:

30pcs

Qty/carton:

600pcs

Carton size:

37*30*30cm

G.W/carton:

9kg

Product Specifications

LINK-PP Part Number: LPJG29864BANL-2 Connector Type Jack
Part Status Active Mounting Type Through Hole
Number of Positions/Contacts 10p8c (RJ45, Ethernet) Application-Lan Ethernet(NoN PoE)
Number of Ports 1x2 Port Speed 10/100/1000 Base-T
Latch Up Cores per Port 8
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs Without LED Option Yellow/Green Led
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.535/13.60 Package Length (Inches/mm) 1.00/25.40
Package Width (Inches/mm) 1.238/31.45 Temperature -40℃ TO 85℃
Bst Circuit Yes AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

LINK-PP LPJG29864BANL-2 1x2 Dual-Port Gigabit 100/1000 Base-T RJ45 Magjack Technical Overview

The LINK-PP LPJG29864BANL-2 is an industrial-grade dual-port (1x2) side-by-side RJ45 Integrated Connector Module (ICM) with built-in Gigabit 100/1000 Base-T magnetics, Yellow/Green status LEDs, a smooth metal shield (without EMI tabs), and a Bob Smith Termination (BST) circuit per port. Compliant with IEEE 802.3ab standards, it integrates an 8-core transformer/choke matrix per channel (1CT:1CT turns ratio), delivering dual-channel 1 Gbps full-duplex transmission, 1500Vrms isolation, ESD protection, and extended operating temperature reliability from -40°C to +85°C for smart meters, satellite receivers, set-top boxes, and smart home gateways.

  • 1x2 Dual-Port Integrated Architecture: Consolidates two Gigabit Ethernet RJ45 ports side-by-side into a single 31.45mm wide metal-shielded housing, reducing SMT placement cycles and PCB real estate compared to two discrete single-port connectors.
  • Gigabit Ethernet Magnetics per Channel: 10p8c RJ45 connector per port integrated with an independent 8-core magnetic matrix (1CT:1CT turns ratio) supporting 1000BASE-T full-duplex communication across 4 differential pairs per channel.
  • Built-In Circuit Protection & Noise Rejection: Features an integrated Bob Smith Termination (BST) network and Auto-MDIX logic per port for enhanced common-mode EMI suppression and automatic cable crossover detection.
  • Industrial Temperature Endurance: Certified for an extended operating temperature range of -40°C to +85°C with optional 6u", 15u", or 30u" gold contact plating for harsh unconditioned environments.

LINK-PP LPJG29864BANL-2 Dual-Port Gigabit RJ45 Magjack Connector Overview

LINK-PP LPJG29864BANL-2 is a right-angle side-entry 1x2 dual-port RJ45 integrated connector module (ICM) designed for non-PoE Gigabit Ethernet networking platforms. Housing two independent sets of signal transformers, common-mode chokes, Yellow/Green visual status LEDs, and Bob Smith Termination directly inside a metal-shielded jack without EMI tabs, this connector simplifies motherboard layout by replacing discrete PHY magnetics. It provides a highly reliable, dual-port solution for smart grid utility meters, satellite communications ground terminals, set-top boxes, and smart home automation hubs.

Key Benefits of LINK-PP LPJG29864BANL-2 Dual-Port Gigabit RJ45 Connector

  • 1x2 Dual-Port Consolidation Saves PCB Real Estate: Combines two Gigabit RJ45 ports side-by-side into a single 31.45mm wide package, reducing motherboard trace routing complexity and component placement costs.
  • Full Gigabit 1000BASE-T Speed (IEEE 802.3ab): Embeds an 8-core transformer and common-mode choke matrix per port that isolates and filters 4 differential pairs per channel, ensuring clean 1 Gbps eye diagrams with minimal differential insertion loss.
  • Industrial Operating Temperature Range (-40°C to +85°C): Constructed with high-grade FR4 substrate and durable housing to withstand severe thermal fluctuations in unconditioned outdoor equipment and utility meter enclosures.
  • Smooth Metal Shield (Without EMI Tabs) for Flush Fitment: Engineered without external EMI spring tabs, enabling clean, flush insertion into front-panel bezel cutouts with low insertion force.
  • Integrated Bob Smith Termination (BST) & Auto-MDIX per Port: Built-in 75-ohm BST circuits route common-mode EMI noise and ESD transients safely to ground, while Auto-MDIX logic supports automatic straight-through or crossover cable detection.
  • Customizable Gold Contact Plating: Available in Gold 6u", 15u", or 30u" plating thickness options to ensure low contact resistance and corrosion protection across 750+ mating cycles per port.

Integrated Magnetics & Dual-Port 1000BASE-T Signal Architecture

The LINK-PP LPJG29864BANL-2 utilizes an advanced 1x2 Dual-Port Gigabit Integrated Connector Module (ICM) architecture that embeds 10/100/1000 Base-T magnetics directly behind each RJ45 port pin array, eliminating high-frequency noise radiation caused by long trace runs on the motherboard.

8-Core Per-Port Gigabit Transformer & Choke Configuration

Featuring a 1CT:1CT transmit and receive turns ratio with 8 magnetic cores per channel, the LPJG29864BANL-2 establishes 1500Vrms galvanic isolation between the Ethernet PHY transceiver chip and the external network cable. The dual 8-core layout provides precise impedance matching across all differential pairs, suppressing inter-pair crosstalk and inter-port channel interference.

Bob Smith Termination (BST) & ESD Rejection

The integrated Bob Smith Termination (BST) networks utilize high-voltage capacitors and precision resistors to balance line impedance on unused cable pairs. This prevents common-mode noise reflection, reduces radiated EMI emissions, and enhances system ESD immunity during cable plugging.

PCB Mounting & Mechanical Specifications

Designed for automated Through-Hole Technology (THT) assembly, the LPJG29864BANL-2 incorporates robust mechanical features to ensure structural integrity on FR4 substrates.

1x2 Dual-Port Package Geometry & Tab-Up Latch Alignment

With package dimensions of 13.60mm H x 25.40mm L x 31.45mm W, the LPJG29864BANL-2 provides a compact dual-port footprint. Integrated Yellow/Green LEDs provide clear visual link status and data activity diagnostics per channel, while T-Post mechanical pegs anchor the housing firmly to the motherboard during cable plugging.

Target Applications: Smart Meters, Satellite Terminals, and Smart Home Gateways

Combining IEEE 802.3ab Gigabit speed, 1x2 dual-port density, BST noise suppression, and industrial thermal endurance (-40°C to +85°C), the LINK-PP LPJG29864BANL-2 supports diverse embedded systems:

  • Smart Grid Utility Meters & Data Concentrators: Ideal for electric/gas metering infrastructure, smart grid gateways, and power quality monitoring units requiring dual Gigabit ports.
  • Satellite Communication Receivers & Ground Modems: Deployed in satellite broadband receivers, ground terminal modems, and outdoor communications equipment.
  • Smart TV Set-Top Boxes & Smart Home Gateways: Suitable for IP set-top boxes, smart home automation hubs, and commercial media gateways.

How to Select and Verify LINK-PP LPJG29864BANL-2 RJ45 Magjack

Hardware design engineers and procurement specialists evaluating the LINK-PP LPJG29864BANL-2 for new designs or second-source qualification should verify the following core parameters:

  • 1x2 Dual-Port Footprint Alignment: Confirm that the 1x2 dual-port 10p8c through-hole pin arrangement, 31.45mm package width, and T-Post peg locations match your motherboard Gerber layout.
  • 8-Core Per-Port Magnetics Compatibility: Confirm that an 8-core magnetic matrix per port (4 differential pairs) and a 1CT:1CT turns ratio match your dual Gigabit Ethernet PHY transceiver reference design.
  • LED Option & Driving Polarity: Confirm that the Yellow/Green LED configuration and pin polarity match your host SMT LED driving circuit per channel.
  • Operating Temperature Envelope: Confirm that the -40°C to +85°C industrial temperature rating satisfies your product's environmental specification.

Frequently Asked Questions

What is LINK-PP LPJG29864BANL-2?

LINK-PP LPJG29864BANL-2 is a dual-port (1x2) side-by-side RJ45 Magjack featuring integrated Gigabit 10/100/1000 Base-T magnetics per port, Yellow/Green LEDs, an integrated Bob Smith Termination circuit, and an operating temperature range of -40°C to +85°C.

Does LINK-PP LPJG29864BANL-2 support Gigabit Ethernet (1000BASE-T)?

Yes. LPJG29864BANL-2 is equipped with an 8-core magnetic matrix per port supporting 10/100/1000 Base-T full-duplex Gigabit Ethernet data rates compliant with IEEE 802.3ab standards.

What is the port configuration of LPJG29864BANL-2?

LPJG29864BANL-2 features a 1x2 dual-port side-by-side configuration, providing two independent RJ45 Ethernet ports in a single 31.45mm wide package.

What is the operating temperature range of LPJG29864BANL-2?

LINK-PP LPJG29864BANL-2 is rated for an industrial operating temperature range of -40°C to +85°C (-40°F to +185°F), making it suitable for unconditioned outdoor equipment and utility meter enclosures.

What is the function of the integrated Bob Smith Termination (BST) circuit in LPJG29864BANL-2?

The integrated Bob Smith Termination (BST) circuit utilizes built-in resistors and capacitors per port to balance line impedance on unused cable pairs, suppressing common-mode EMI noise and protecting the Ethernet PHY against ESD transients.

Is LPJG29864BANL-2 a Power over Ethernet (PoE) connector?

No. LPJG29864BANL-2 is a Non-PoE Gigabit RJ45 Magjack designed strictly for Ethernet signal transmission and isolation without DC power delivery.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.