Pulse JXD1-2016NL Compatible LINK-PP LPJG29864BANL-2 10/100/1000 Base-T Tab Up Yellow/Green LED 1x2 Port RJ45 Network
P/N:
LPJG29864BANL-2
Manufacturer:
LINK-PP
Compatible Brand:
Pulse
Compatible P/N:
LPJG29864BANL-2
- Compatible Brands: Pulse
- Number of Ports: 1X2
- Speed: 10Base-T,100Base-TX,1000Base-T
- PoE: Non-PoE
- Latch: Up
- LED Option: Yellow / Green
- Shield EMI Tabs: NO
- Temperature: -40℃ to +85°C
- P/N: LPJG29864BANL-2
- Manufacturer: LINK-PP
- Compatible Brand: Pulse
- Compatible P/N: JXD1-2016NL
Packaging Details:
N.W/pCS:
0.015kg
Package:
Tray
SPQ:
30pcs
Qty/carton:
600pcs
Carton size:
37*30*30cm
G.W/carton:
9kg
Product Specifications
| LINK-PP Part Number: | LPJG29864BANL-2 | Pulse Part Number | JXD1-2016NL |
| Part Status | Active | Connector Type | Jack |
| Number of Positions/Contacts | 10p8c (RJ45, Ethernet) | Application-Lan | Ethernet(NoN PoE) |
| Number of Ports | 1x2 Port | Speed | 10/100/1000 Base-T |
| Latch | Up | Cores per Port | 8 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | SIDE ENTRY |
| Shield EMI Tabs | Without | LED Option | Yellow/Green Led |
| PCB | FR4 | PCB Retaining Post | T POST |
| Package Height (Inches/mm) | 0.535/13.60 | Package Length (Inches/mm) | 1.00/25.40 |
| Package Width (Inches/mm) | 1.238/31.45 | Temperature | -40℃ TO 85℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | No | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
Pulse JXD1-2016NL Compatible LINK-PP LPJG29864BANL-2 1x2 Dual-Port Gigabit 100/1000 Base-T RJ45 Magjack Technical Overview
The LINK-PP LPJG29864BANL-2 (engineered as a direct 100% pin-to-pin drop-in replacement for Pulse Electronics JXD1-2016NL) is an industrial-grade dual-port (1x2) side-by-side RJ45 Integrated Connector Module (ICM) with built-in Gigabit 100/1000 Base-T magnetics, Yellow/Green status LEDs, a smooth metal shield (without EMI tabs), and a Bob Smith Termination (BST) circuit per port. Compliant with IEEE 802.3ab standards, it integrates an 8-core transformer/choke matrix per channel (1CT:1CT turns ratio), delivering dual-channel 1 Gbps full-duplex transmission, 1500Vrms isolation, ESD protection, and extended operating temperature reliability from -40°C to +85°C for smart meters, satellite receivers, set-top boxes, and smart home gateways.
- 1x2 Dual-Port Integrated Architecture: Consolidates two Gigabit Ethernet RJ45 ports side-by-side into a single 31.45mm wide metal-shielded housing, reducing SMT placement cycles and PCB real estate compared to two discrete single-port connectors.
- Gigabit Ethernet Magnetics per Channel: 10p8c RJ45 connector per port integrated with an independent 8-core magnetic matrix (1CT:1CT turns ratio) supporting 1000BASE-T full-duplex communication across 4 differential pairs per channel.
- Built-In Circuit Protection & Noise Rejection: Features an integrated Bob Smith Termination (BST) network and Auto-MDIX logic per port for enhanced common-mode EMI suppression and automatic cable crossover detection.
- Direct Cross-Reference Replacement: Fully qualified footprint and electrical drop-in replacement for Pulse Electronics JXD1-2016NL for BOM cost optimization and secondary sourcing.
LINK-PP LPJG29864BANL-2 Dual-Port Gigabit RJ45 Magjack Connector Overview
LINK-PP LPJG29864BANL-2 is a right-angle side-entry 1x2 dual-port RJ45 integrated connector module (ICM) designed for non-PoE Gigabit Ethernet networking platforms. Housing two independent sets of signal transformers, common-mode chokes, Yellow/Green visual status LEDs, and Bob Smith Termination directly inside a metal-shielded jack without EMI tabs, this connector simplifies motherboard layout by replacing discrete PHY magnetics. It serves as a fully qualified, pin-compatible secondary-source alternative to Pulse Electronics JXD1-2016NL in smart grid utility meters, satellite communications ground terminals, set-top boxes, and smart home automation hubs.
Key Benefits of LINK-PP LPJG29864BANL-2 / Pulse JXD1-2016NL Compatible Magjack
- 1x2 Dual-Port Consolidation Saves PCB Real Estate: Combines two Gigabit RJ45 ports side-by-side into a single 31.45mm wide package, reducing motherboard trace routing complexity and component placement costs.
- Full Gigabit 1000BASE-T Speed (IEEE 802.3ab): Embeds an 8-core transformer and common-mode choke matrix per port that isolates and filters 4 differential pairs per channel, ensuring clean 1 Gbps eye diagrams with minimal differential insertion loss.
- Industrial Operating Temperature Range (-40°C to +85°C): Constructed with high-grade FR4 substrate and durable housing to withstand severe thermal fluctuations in unconditioned outdoor equipment and utility meter enclosures.
- Smooth Metal Shield (Without EMI Tabs) for Flush Fitment: Engineered without external EMI spring tabs, enabling clean, flush insertion into front-panel bezel cutouts with low insertion force.
- Integrated Bob Smith Termination (BST) & Auto-MDIX per Port: Built-in 75-ohm BST circuits route common-mode EMI noise and ESD transients safely to ground, while Auto-MDIX logic supports automatic straight-through or crossover cable detection.
- Direct Second Sourcing for Pulse Electronics JXD1-2016NL: Identical 10p8c through-hole PCB land pattern and pinout allow seamless drop-in secondary sourcing to reduce procurement lead times.
Integrated Magnetics & Dual-Port 1000BASE-T Signal Architecture
The LINK-PP LPJG29864BANL-2 utilizes an advanced 1x2 Dual-Port Gigabit Integrated Connector Module (ICM) architecture that embeds 10/100/1000 Base-T magnetics directly behind each RJ45 port pin array, eliminating high-frequency noise radiation caused by long trace runs on the motherboard.
8-Core Per-Port Gigabit Transformer & Choke Configuration
Featuring a 1CT:1CT transmit and receive turns ratio with 8 magnetic cores per channel, the LPJG29864BANL-2 establishes 1500Vrms galvanic isolation between the Ethernet PHY transceiver chip and the external network cable. The dual 8-core layout provides precise impedance matching across all differential pairs, suppressing inter-pair crosstalk and inter-port channel interference.
Bob Smith Termination (BST) & ESD Rejection
The integrated Bob Smith Termination (BST) networks utilize high-voltage capacitors and precision resistors to balance line impedance on unused cable pairs. This prevents common-mode noise reflection, reduces radiated EMI emissions, and enhances system ESD immunity during cable plugging.
PCB Mounting & Mechanical Specifications
Designed for automated Through-Hole Technology (THT) assembly, the LPJG29864BANL-2 incorporates robust mechanical features to ensure structural integrity on FR4 substrates.
1x2 Dual-Port Package Geometry & Tab-Up Latch Alignment
With package dimensions of 13.60mm H x 25.40mm L x 31.45mm W, the LPJG29864BANL-2 provides a compact dual-port footprint. Integrated Yellow/Green LEDs provide clear visual link status and data activity diagnostics per channel, while T-Post mechanical pegs anchor the housing firmly to the motherboard during cable plugging.
Target Applications: Smart Meters, Satellite Terminals, and Smart Home Gateways
Combining IEEE 802.3ab Gigabit speed, 1x2 dual-port density, BST noise suppression, and Pulse JXD1-2016NL compatibility, the LINK-PP LPJG29864BANL-2 supports diverse embedded systems:
- Smart Grid Utility Meters & Data Concentrators: Ideal for electric/gas metering infrastructure, smart grid gateways, and power quality monitoring units requiring dual Gigabit ports.
- Satellite Communication Receivers & Ground Modems: Deployed in satellite broadband receivers, ground terminal modems, and outdoor communications equipment.
- Smart TV Set-Top Boxes & Smart Home Gateways: Suitable for IP set-top boxes, smart home automation hubs, and commercial media gateways.
How to Select and Verify LPJG29864BANL-2 vs. Pulse JXD1-2016NL
Hardware design engineers and procurement specialists evaluating the LINK-PP LPJG29864BANL-2 as a second-source replacement for Pulse Electronics JXD1-2016NL should verify the following core parameters:
- 1x2 Dual-Port Footprint Alignment: Confirm that the 1x2 dual-port 10p8c through-hole pin arrangement, 31.45mm package width, and T-Post peg locations match the Pulse JXD1-2016NL PCB layout.
- 8-Core Per-Port Magnetics Compatibility: Confirm that an 8-core magnetic matrix per port (4 differential pairs) and a 1CT:1CT turns ratio match your dual Gigabit Ethernet PHY transceiver reference design.
- LED Option & Driving Polarity: Confirm that the Yellow/Green LED configuration and pin polarity match your host SMT LED driving circuit per channel.
- Operating Temperature Envelope: Confirm that the -40°C to +85°C industrial temperature rating satisfies your product's environmental specification.
Frequently Asked Questions
Is LINK-PP LPJG29864BANL-2 compatible with Pulse Electronics JXD1-2016NL?
Yes. LINK-PP LPJG29864BANL-2 is a direct functional, electrical, and footprint drop-in replacement for Pulse Electronics JXD1-2016NL, featuring the same 1x2 Tab-Down 1000BASE-T Gigabit Magjack layout, 31.45mm package width, and Yellow/Green LEDs.
Does LINK-PP LPJG29864BANL-2 support Gigabit Ethernet (1000BASE-T)?
Yes. LPJG29864BANL-2 is equipped with an 8-core magnetic matrix per port supporting 10/100/1000 Base-T full-duplex Gigabit Ethernet data rates compliant with IEEE 802.3ab standards.
What is the port configuration of LPJG29864BANL-2?
LPJG29864BANL-2 features a 1x2 dual-port side-by-side configuration, providing two independent RJ45 Ethernet ports in a single 31.45mm wide package.
What is the operating temperature range of LPJG29864BANL-2?
LINK-PP LPJG29864BANL-2 is rated for an industrial operating temperature range of -40°C to +85°C (-40°F to +185°F), making it suitable for unconditioned outdoor equipment and utility meter enclosures.
What is the function of the integrated Bob Smith Termination (BST) circuit in LPJG29864BANL-2?
The integrated Bob Smith Termination (BST) circuit utilizes built-in resistors and capacitors per port to balance line impedance on unused cable pairs, suppressing common-mode EMI noise and protecting the Ethernet PHY against ESD transients.
Is LPJG29864BANL-2 a Power over Ethernet (PoE) connector?
No. LPJG29864BANL-2 is a Non-PoE Gigabit RJ45 Magjack designed strictly for Ethernet signal transmission and isolation without DC power delivery.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































