HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJG46842AENL-1左绿右黄10p.jpg
  • LPJG46842AENL-1左绿右黄10p1.jpg
  • IMG_3693(1710989525989).jpg
  • IMG_3712(1710989525934).jpg
  • IMG_3722(1710989525950).jpg

RB4-11GF9V2F Compatible LPJG46842AENL-1 Gigabit Magnetics RJ45 1x4 Port jacks 1000 Base-T Tab Down Green/Yellow LED

P/N:

LPJG46842AENL-1

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJG46842AENL-1

  • Number of Ports: 1X4
  • Speed: 1000Base-T,100Base-TX,10Base-T
  • PoE: Non-PoE
  • Latch: Down
  • Mounting Type: THT
  • LED Option: Green / Yellow
  • Shield EMI Tabs: YES
  • Temperature: 0℃ to 70℃
  • P/N: LPJG46842AENL-1
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: RB4-11GF9V2F

Packaging Details:

N.W/pCS:

0.025kg

Package:

Tray

SPQ:

20pcs

Qty/carton:

400pcs

Carton size:

37*30*30cm

G.W/carton:

10kg

Product Specifications

LINK-PP Part Number LPJG46842AENL-1 Other Part Number RB4-11GF9V2F
Part Status Active Connector Type Jack
Number of Positions/Contacts 10p8c (RJ45, Ethernet) Application-Lan Ethernet(Non-PoE)
Number of Ports 1x4 Port Speed 10/100/1000 Base-T
Latch Down Cores per Port 8
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs With LED Option Green/Yellow Led
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.533/13.55 Package Length (Inches/mm) 0.839/21.30
Package Width (Inches/mm) 2.328/59.12 Temperature 0℃ TO 70℃
Bst Circuit Yes AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

Product Engineering Overview

LINK-PP LPJG46842AENL-1 combines four RJ45 ports and integrated magnetics in a side-entry, Tab-Down assembly. The existing product record lists 10/100/1000 Base-T, Non-PoE operation and green/yellow LEDs; the attached drawing labels the interface 1000 Base-TX. Confirm the supported link modes against the applicable product revision and host PHY.

The four-port body is listed as 59.12 mm wide, 21.30 mm long and 13.55 mm high. Drawing LP15092301 Rev A shows a through-hole layout for all four ports, shield and retaining features. The component temperature range is 0°C to 70°C.

Part: LPJG46842AENL-1
Cross Reference: RB4-11GF9V2F
Ports: 1×4
Mounting: Through hole, Tab Down
Temperature: 0°C to 70°C
PoE: Non-PoE

Compatibility and Design Positioning

The existing product record positions LPJG46842AENL-1 as a cross-reference and alternative sourcing option for RB4-11GF9V2F. Before substitution, compare the official drawings, port spacing, footprint, shield contacts, LED pinout and magnetics for both parts. A shared four-port form does not establish interchangeability.

Procurement and OEM Qualification

Request samples by LINK-PP part number and applicable drawing revision. Confirm the contact plating variant, packaging and lead time before AVL approval; qualify samples in the production PCB and panel, and resolve the turns-ratio documentation discrepancy before release.

Topology and Physical Packaging

  • Ports: Four side-by-side RJ45 openings in one housing.
  • Board attachment: Through-hole signal and LED pins with shield and retaining features.
  • Latch access: Tab-Down openings need clearance beneath each mating plug.
  • Indicators: The drawing shows green and yellow LEDs for each port.
  • Envelope: Check the 59.12 × 21.30 × 13.55 mm housing and full panel cutout together.

Magnetics and Electrical Interface

The existing specification table lists a 1CT:1CT RX/TX ratio, while drawing LP15092301 Rev A labels the turns ratio 1CT:1. Confirm the correct revision and transformer connections before finalizing the PHY interface. The drawing also lists a minimum 1500 Vrms hipot test and 350 µH minimum OCL at 100 kHz, 0.1 V and 8 mA DC bias; use the applicable revision and test conditions for design verification.

Mechanical Envelope and PCB Layout Considerations

  • Panel: Confirm four-port spacing and access to each Tab-Down latch.
  • Footprint: Check all signal, LED, shield and retaining holes against the drawing.
  • Shield: Review shield contacts and enclosure grounding with the host design.
  • LED drive: The schematic identifies green pins 11/12 and yellow pins 13/14 for the illustrated port. Check the complete port pin mapping and polarity in the applicable drawing and provide current limiting.

Design Consideration Comparison

Port arrangement Engineering consideration
1×4 integrated assembly Shared housing fixes port spacing; verify the complete footprint and panel cutout.
Four individual connectors Placement flexibility and board area depend on the chosen parts and layout.

Application Considerations

Target Application Profile Primary Engineering Consideration
Ethernet switches and hubs Check port spacing, latch clearance and shield connection.
Multi-port network equipment Check per-port PHY routing and the full pin pattern.
LAN-on-motherboard equipment Check the board-edge and enclosure footprint.

Engineering Verification Checklist

  1. Confirm speed modes with the applicable product documentation and PHY.
  2. Resolve the turns-ratio discrepancy and verify center-tap connections.
  3. Compare the complete four-port hole pattern and fabrication tolerances.
  4. Test all plug latches against the enclosure.
  5. Verify LED mapping, polarity and current limiting for each port.
  6. Test isolation, signal integrity and temperature in the assembled system.

Frequently Asked Questions

How many ports does LPJG46842AENL-1 provide?

The connector combines four RJ45 ports in a 1×4 assembly.

Can it replace RB4-11GF9V2F?

The existing record lists RB4-11GF9V2F as a cross-reference. Compare the two manufacturers' drawings and specifications and qualify samples before substitution.

What should be checked in the magnetic interface?

The table lists 1CT:1CT while drawing LP15092301 Rev A states 1CT:1. Confirm the applicable revision and pinout before finalizing the PHY design.

How should the LEDs be connected?

The drawing identifies green and yellow LED pins for the illustrated port; check the complete multi-port mapping, polarity and current limiting against the host supply.

Does LPJG46842AENL-1 support PoE?

The record identifies it as Non-PoE. Choose a solution rated for the required PoE standard when powering equipment over Ethernet.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Download

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.