HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJG48831AENL左绿右黄10p带五弹.jpg
  • IMG_3693(1710988640149).jpg
  • LPJG48831AENL左绿右黄10p带五弹1.jpg
  • IMG_3722(1710988640192).jpg
  • IMG_3712(1710988640105).jpg

LPJG48831AENL 1000 Base-T RJ45 1x4 Port Jacks With Magnetics Tab Up Green/Yellow Leds

P/N:

LPJG48831AENL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJG48831AENL

  • Compatible Brands: LINK-PP
  • Number of Ports: 1X4
  • Speed: 10Base-T,100Base-TX,1000Base-T
  • PoE: Non-PoE
  • Latch: Up
  • Mounting Type: THT
  • LED Option: Green / Yellow
  • Shield EMI Tabs: YES
  • Temperature: 0℃ to 70℃
  • P/N: LPJG48831AENL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LPJG48831AENL

Packaging Details:

N.W/pCS:

0.026kg

Package:

Tray

SPQ:

20pcs

Qty/carton:

400pcs

Carton size:

373030cm

G.W/carton:

10.7kg

Product Specifications

LINK-PP Part Number: LPJG48831AENL Connector Type Jack
Part Status Active Mounting Type Through Hole
Number of Positions/Contacts 10p8c (RJ45, Ethernet) Application-Lan Ethernet(Non-PoE)
Number of Ports 1x4 Port Speed 10/100/1000 Base-T
Latch Up Cores per Port 12
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs With LED Option Green/Yellow
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.531/13.50 Package Length (Inches/mm) 1.00/25.40
Package Width (Inches/mm) 2.331/59.20 Temperature 0℃ TO 70℃
Bst Circuit Yes AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

Product Engineering Overview

LINK-PP LPJG48831AENL combines four RJ45 ports and integrated magnetics in a through-hole, side-entry assembly. The product record lists 10/100/1000 Base-T Ethernet, Non-PoE operation, Tab-Up latches and green/yellow LEDs. The connector is specified for a component operating range of 0°C to 70°C.

The shared 1×4 housing measures 59.20 mm wide, 25.40 mm long and 13.50 mm high in the product record. Review the complete board footprint and panel opening together so all four plugs and latches remain accessible.

Part: LPJG48831AENL
Interface: 10/100/1000 Base-T
Ports: 1×4
Mounting: Through hole, Tab Up
Temperature: 0°C to 70°C
Power: Non-PoE

Design Positioning and Qualification

For a comparable four-port design, check the entire mechanical envelope, board hole pattern, magnetic pinout, shield and LED connections against the current component drawings. No third-party part number is asserted as an equivalent in this product record.

Procurement and OEM Qualification

Request samples using the LINK-PP part number and applicable drawing revision. Confirm contact plating, packaging and lead time before AVL approval, and validate board fit, panel access and electrical performance on the intended system before production release.

Topology and Physical Packaging

  • Port layout: Four adjacent RJ45 ports in a 1×4 housing.
  • Mounting: Through-hole pins with shield and retaining-post features.
  • Latch: Tab-Up openings need clearance for each plug release.
  • Indicators: Green/yellow LEDs are listed in the product record.
  • Envelope: The 59.20 × 25.40 × 13.50 mm body requires a matching board and panel arrangement.

Magnetics and Electrical Interface

The product record lists 12 cores per port, a BST circuit, and a 1CT:1CT RX/TX ratio. The attached drawing LP11010426 Rev A labels the turns ratio 1CT:1; confirm the applicable product revision and electrical pinout before finalizing the PHY interface. The record specifies Ethernet interfaces supporting AutoMDX operation.

Mechanical Envelope and PCB Layout Considerations

  • Panel: Check four-port spacing, plug access and latch-release clearance.
  • Footprint: Match all signal, LED, shield and retaining holes to the applicable mechanical drawing.
  • Shield: Review shield connection and PCB clearances with the host grounding design.
  • LED drive: Verify pin assignments and polarity in the applicable schematic, then size current limiting for the host supply.

Design Consideration Comparison

Port arrangement Engineering consideration
1×4 assembly One housing fixes port spacing; verify the complete footprint and panel cutout.
Individual RJ45 connectors Placement and routing depend on the selected connectors and board layout.

Application Considerations

Target Application Profile Primary Engineering Consideration
Multi-port Ethernet equipment Check the PHY interface, port spacing and complete board footprint.
Enclosed network systems Check shield connection, panel opening and access to each latch.

Engineering Verification Checklist

  1. Confirm supported link modes and PHY interface requirements.
  2. Resolve the turns-ratio discrepancy against the applicable product revision.
  3. Check the full PCB hole pattern and fabrication tolerances.
  4. Test plug insertion and latch access in the enclosure.
  5. Verify LED pin mapping, polarity and current limiting.
  6. Validate isolation, signal integrity and temperature in the assembled system.

Frequently Asked Questions

How many ports are included in LPJG48831AENL?

The connector combines four RJ45 ports in a single 1×4 housing.

What must be checked before replacing a four-port connector?

Compare both parts' complete footprints, electrical pinouts, shield connections, panel geometry and LED circuits, then qualify samples in the host system.

Why do the table and drawing show different turns ratios?

The product record lists 1CT:1CT, while drawing LP11010426 Rev A labels 1CT:1. Confirm the applicable revision with the manufacturer before releasing the magnetic interface.

How should the LEDs be connected?

Check the applicable schematic for each LED's pin assignment and polarity, and size current limiting for the actual host supply.

Does LPJG48831AENL support PoE?

The product record specifies Non-PoE. Choose a connector and magnetic solution rated for the required PoE standard when power over Ethernet is needed.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Download

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.