LPJT9471AONL 2.5G Base-T rj45 jack with magnetics PoE+ Single Port Tab Up Orange&Green/Yellow Leds
P/N:
LPJT9471AONL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LPJT9471AONL
- Compatible Brands: LINK-PP
- Number of Ports: 1X1
- Speed: 2.5GBase-T
- PoE: PoE+
- Latch: Up
- Mounting Type: THT
- LED Option: Orange&Green / Yellow
- Shield EMI Tabs: YES
- Temperature: -40℃ to +85°C
- P/N: LPJT9471AONL
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LPJT9471AONL
Packaging Details:
N.W/pCS:
0.011kg
Package:
Tray
SPQ:
60pcs
Qty/carton:
840pcs
Carton size:
37*30*30cm
G.W/carton:
9kg
Product Specifications
| LINK-PP Part Number | LPJT9471AONL | Connector Type | Jack |
| Part Status | Active | Mounting Type | Through Hole |
| Number of Positions/Contacts | 12P8C (RJ45, Ethernet) | Application-LAN | Ethernet (PoE+) |
| Number of Ports | 1x1 Port | Speed | 2.5GBASE-T |
| Latch | Up | Cores per Port | 8 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | Side Entry |
| Shield EMI Tabs | With | LED Option | Orange & Green / Yellow |
| PCB | FR4 | PCB Retaining Post | T-Post |
| Package Height (Inches/mm) | 0.531 / 13.50 | Package Length (Inches/mm) | 1.280 / 32.50 |
| Package Width (Inches/mm) | 0.650 / 16.50 | Temperature | -40°C to +85°C |
| BST Circuit | Yes | AutoMDX | Yes |
| Diodes | No | Contact Mating Area Plating | Gold 6µ" / 15µ" / 30µ" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T, C |
Single-Port 2.5GBASE-T Integrated RJ45 MagJack with PoE+ for High-Throughput Network Equipment
The LINK-PP LPJT9471AONL is a single-port integrated RJ45 MagJack designed for 2.5GBASE-T Ethernet applications with Power over Ethernet Plus (PoE+) requirements. It combines the 8P8C modular interface, internal isolation magnetics, Bob Smith termination, and status LEDs inside a shielded through-hole connector assembly, helping consolidate physical-layer components and save space on the host PCB.
The connector features a 90° right-angle, side-entry profile with a Tab-Up latch, T-Post mechanical PCB retention, EMI grounding tabs, and an operating temperature range of -40°C to +85°C. Its standardized 13.50 mm height and 16.50 mm width suit board-edge layouts where component height, front-panel alignment, and port density are key mechanical design constraints.
Hardware engineers should verify the mechanical drawing, pin assignment, PCB footprint, and electrical parameters against system specifications before releasing board layouts for production.
2.5GBASE-T and PoE+ Create a Combined Signal and Power Design Challenge
Implementing an integrated 2.5GBASE-T interface alongside PoE+ power delivery requires the connector assembly to support two distinct operational requirements: high-speed differential signal transmission and DC power feeding across the network cabling.
In multi-gigabit systems, the magnetic interface must preserve differential signal integrity across the operating frequency band. When PoE power delivery is implemented, the internal magnetic components must also accommodate the required DC power paths without compromising the intended physical-layer Ethernet performance.
Hardware designers should evaluate the connector in conjunction with the host Ethernet PHY, differential trace layout, PoE controller architecture, cable specifications, and system-level EMC grounding strategy.
Magnetics Performance Under DC Bias
PoE applications introduce DC current into the Ethernet interface through transformer center taps. In integrated MagJacks, the magnetic components must accommodate this DC bias current while maintaining sufficient inductance (OCL) across the operating temperature range.
A reduction in effective inductance can influence low-frequency signal behavior and baseline wander compensation. Consequently, PoE-capable integrated magnetics should be evaluated against the applicable isolation, insertion loss, return loss, and DC-bias requirements for the target operating environment.
Integrating these magnetic and termination structures into the LPJT9471AONL allows the host design to implement an integrated physical-layer interface instead of routing differential pairs to separate discrete transformer ICs.
Mechanical and PCB Design Considerations
Physical compatibility and board-level anchoring are essential when selecting an integrated MagJack. The LPJT9471AONL incorporates several mechanical features relevant to board layout and assembly:
1. 12P8C Interface and PCB Termination
The 12P8C designation describes a connector with a standard 8-contact RJ45 mating interface and 12 through-hole termination pins on the PCB side. The additional PCB terminals accommodate the integrated functions of the connector assembly.
Because pin assignments and internal routings can vary across implementations, designers should compare the complete pinout and mechanical drawing against the board layout before finalizing the PCB design.
2. Tab-Up Latch Orientation
The Tab-Up configuration positions the RJ45 plug latch release toward the upper side of the connector. This orientation provides unimpeded latch access when the connector is mounted along the bottom edge of a circuit board or within recessed enclosure openings.
3. T-Post Mechanical Retention
The molded T-Post acts as a mechanical locating and retention feature that anchors the connector housing to the PCB. It helps distribute lateral and axial forces during cable insertion and extraction, supporting solder-joint reliability under mechanical stress.
4. Shielding Structure and Chassis Integration
The connector is enclosed in a metal shield equipped with EMI grounding tabs. These tabs provide a conductive contact interface to the front panel or enclosure cutout, supporting the system-level shielding and grounding design.
Overall EMC performance depends on the complete implementation, including PCB grounding, chassis bonding, connector-to-panel contact, cable shielding, and differential layout symmetry. Connector-level shielding should be validated as part of system-level EMC testing.
Integrated MagJack Architecture: Magnetics, BST, and LED Functions
An integrated MagJack consolidates several physical-layer interface functions into a single housing:
- Integrated Ethernet Magnetics: Houses an internal 8-core magnetic structure with a 1CT:1CT turns ratio (T, C configuration) specified for 2.5GBASE-T physical-layer implementations.
- BST Termination: Integrates Bob Smith termination networks to provide the specified common-mode line termination directly inside the connector body.
- Port Status LEDs: Features an Orange & Green bi-color LED on one side and a Yellow LED on the other for visual link and activity indication. Drive circuitry and current-limiting resistors must be placed on the host PCB according to PHY requirements.
- AutoMDX Support: Specified for AutoMDX-compatible Ethernet PHY implementations.
- Metal Shield: Provides an external metal shielding structure with integrated EMI tabs to support the equipment's grounding and shielding design.
Architecture Comparison: Integrated 2.5G PoE+ MagJack vs. Alternative Implementations
| Evaluation Metric | LPJT9471AONL Integrated 2.5G PoE+ MagJack | Discrete 2.5G Magnetics + Non-Magnetic Jack | Standard 1GBASE-T PoE+ MagJack |
|---|---|---|---|
| Ethernet Speed | 2.5GBASE-T | Dependent on selected discrete transformer and PHY | Typically up to 1000BASE-T |
| PoE Architecture | Integrated magnetic interface for PoE applications | Requires separately selected PoE-rated discrete module | Integrated magnetic interface for PoE applications |
| Component Integration | RJ45 + magnetics + BST + LEDs | Separate connector, transformer module, and LEDs | RJ45 + magnetics + related interface functions |
| PCB Layout Flexibility | Moderate — fixed internal circuit routing | High — magnetics can be placed independently on PCB | Moderate |
| PCB Component Count | Reduced — combines multiple I/O functions in one part | Higher — requires multiple discrete components | Reduced |
| Primary Advantage | Compact multi-gigabit interface with integrated PoE support | Maximum freedom for custom layout or high-voltage isolation | Established legacy Gigabit architecture |
Application Considerations for LPJT9471AONL
| Target Application Profile | Potential Plating Option | Primary Engineering Consideration |
|---|---|---|
| Industrial Ethernet Switches and Controllers | Gold 15µ" / 30µ" | -40°C to +85°C operating temperature, mechanical retention, PoE power extraction, and multi-gigabit signal integrity. |
| Enterprise Multi-Gigabit Access Points | Gold 15µ" | Combines 2.5GBASE-T uplink throughput with PoE+ power delivery within a low-profile enclosure. |
| Networked Imaging and Monitoring Equipment | Gold 15µ" / 30µ" | High-throughput data connectivity, mating durability, extended temperature range, and physical-layer electrical isolation. |
| Industrial Vision and Automation Hubs | Gold 15µ" / 30µ" | High-bandwidth sensor streams, resistance to equipment vibration, thermal cycling, and integrated PoE capability. |
Frequently Asked Questions
What are the primary features of the LINK-PP LPJT9471AONL RJ45 MagJack?
The LPJT9471AONL is a single-port integrated RJ45 MagJack supporting 2.5GBASE-T Ethernet and PoE+ applications. It incorporates an 8-core magnetic structure, Tab-Up latch, right-angle side-entry through-hole mounting, integrated Bob Smith termination, bi-color LEDs, and EMI shielding tabs, with an operating temperature range of -40°C to +85°C.
Does the LPJT9471AONL support 2.5GBASE-T Ethernet?
Yes. The product specification identifies the LPJT9471AONL for 2.5GBASE-T Ethernet applications. Final link performance depends on the host Ethernet PHY, differential PCB layout, cable quality, magnetic characteristics, and overall system implementation.
Is the LPJT9471AONL suitable for PoE+ applications?
The product specification identifies the LPJT9471AONL for Ethernet PoE+ applications. The complete PoE implementation must be validated according to the applicable PSE or PD architecture, PoE controller specifications, magnetic DC-bias limits, thermal conditions, and relevant IEEE standards.
What does the 12P8C specification mean for this RJ45 MagJack?
The 12P8C specification identifies a 12-position connector configuration with 8 contacts at the RJ45 mating interface. The additional PCB-side terminations accommodate the integrated functions of the MagJack and should be verified against the manufacturer's pinout and schematic.
What LED configuration is integrated into the LPJT9471AONL?
The LPJT9471AONL is specified with an Orange & Green bi-color LED on one side and a Yellow LED on the other. The host PCB must provide suitable current-limiting resistors and drive circuitry matched to the selected Ethernet PHY and LED electrical ratings.
What gold plating options are available for the LPJT9471AONL?
The LPJT9471AONL is available with 6 micro-inch, 15 micro-inch, or 30 micro-inch gold plating options at the contact mating area. Selection should be based on the required mating cycles, operating environment, connector qualification requirements, and applicable product specifications.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































