Dell GP-SFP-10GBX-D-80-I Compatible 10GBASE-BX SFP+ BiDi Transceiver with DOM
P/N:
LS-BL554910-80I
Manufacturer:
LINK-PP
Compatible Brand:
DELL
Compatible P/N:
GP-SFP-10GBX-D-80-I
- Compatible Brands: DELL
- Form Factor: SFP+
- Data Rate: 10G
- Distance: ≤80km
- Type: Single Mode
- Connector: Simplex LC
- Model: ZR
- Wavelength: 1550nm-TX/1490nm-RX
- P/N: LS-BL554910-80I
- Manufacture: LINK-PP
- Compatible Brand: DELL
- Compatible P/N: GP-SFP-10GBX-D-80-I
Product Specifications
| LINK-PP Part Number | LS-BL554910-80I | Dell Part Number | GP-SFP-10GBX-D-80-I |
| Form Factor | SFP+ | Max Data Rate | 10.7 Gbps |
| Wavelength | 1550nm-TX / 1490nm-RX | Max Cable Distance | 80km (Up to 100km) |
| Connector | Simplex LC | Media | SMF (Single-Mode Fiber) |
| Optical Components | Cooled EML / APD BiDi | DOM / DDM Support | Yes |
| TX Power | -1.0 to +5.0 dBm | RX Power | -23.0 to -6.0 dBm |
| Receiver Sensitivity | ≤ -25.0 dBm | Receiver Overload | -7.0 dBm |
| Industrial Temp Range | -40°C to 85°C | Protocols | SFP+ MSA Compliant, CPRI, eCPRI |
Dell GP-SFP-10GBX-D-80-I Compatible LINK-PP LS-BL554910-80I 10G BiDi SFP+ Optical Transceiver 1550nm-TX/1490nm-RX 80km Simplex LC for Industrial Telecom Networks
The LINK-PP LS-BL554910-80I is a carrier-grade, Dell GP-SFP-10GBX-D-80-I compatible 10G Bidirectional (BiDi) SFP+ optical transceiver designed for long-haul metropolitan area networks (MAN), Internet Service Provider (ISP) backbones, and 5G fronthaul connectivity. Engineered to transmit and receive data over a single strand of Single-Mode Fiber (SMF) via Wavelength Division Multiplexing (WDM), this module effectively doubles existing fiber capacity.
Built for extreme environments, this Industrial Temperature (-40°C to 85°C) transceiver integrates a premium Cooled EML laser and a high-sensitivity APD photodiode with a trans-impedance preamplifier (TIA). Compliant with CPRI, eCPRI, and SFP+ MSA standards, it delivers deterministic 10.7Gbps performance up to 80km, while providing network operations centers (NOC) with real-time DOM telemetry to ensure uninterrupted connectivity across critical long-haul infrastructure.
Application Topologies and Deployment Scenarios
Understanding the strategic value of 10G BiDi optical technology is crucial for optimizing CAPEX in telecom and enterprise networks. This transceiver is strictly optimized for environments where fiber strand availability is limited, and physical operating conditions are severe.
5G Fronthaul and Cell Tower Connectivity
Fully compliant with CPRI (Common Public Radio Interface) and eCPRI protocols, this industrial-grade module is standardly deployed in remote cell towers and outdoor enclosures. It provides high-bandwidth, low-latency uplinks between Baseband Units (BBU) and Remote Radio Heads (RRH), withstanding extreme weather fluctuations without signal degradation.
Metropolitan Area Networks (MAN) and ISP Backbones
For ISPs and regional carriers, bridging distances between metropolitan POPs (Points of Presence) requires high optical budgets. This 80km-rated transceiver allows architects to bypass intermediate optical amplifiers or repeaters in many long-haul edge-to-core network designs, dramatically simplifying the transmission topology.
Fiber Resource Optimization via BiDi WDM
In legacy deployments utilizing dual-fiber transceivers, scaling network capacity requires trenching new fiber—a massively expensive undertaking. By utilizing integrated WDM technology to multiplex TX and RX over a single Simplex LC strand, network engineers can instantly double their available fiber plant capacity for enterprise campus extensions and municipal networks.
Physical Layer Design and Optical Performance Optimization
Transmitting 10Gbps over 80 kilometers requires sophisticated optical engineering to overcome chromatic dispersion and severe signal attenuation. LINK-PP transceivers are built with superior chip-level components to ensure robust link integrity.
Cooled EML Transmitter and APD Receiver Architecture
The transmission core utilizes a Cooled EML (Electro-absorption Modulated Laser) operating at 1550nm, which offers significantly lower chirp and narrower spectral width than standard DML lasers, preventing data corruption over long distances. The receiving end employs a highly sensitive 1490nm APD (Avalanche Photodiode), capable of amplifying extremely weak optical signals after 80km of fiber attenuation.
Signal Integrity and 80km Optical Link Budget
The optical link budget is the critical metric for long-haul stability. This LS-BL554910-80I module boasts an exceptional optical power profile engineered for substantial distance:
- Tx Output Power: -1.0 dBm to +5.0 dBm
- Rx Sensitivity: Better than -25.0 dBm
- Receiver Overload: -7.0 dBm
- Optical Link Budget: ~24 dB margin (guaranteeing 80km reach, extending up to 100km on pristine OS2 fiber)
Hardened Industrial Thermal Management
Unlike commercial optics (0°C to 70°C), this industrial-rated transceiver is equipped with a specialized MCU control unit and thermal dissipation housing to operate flawlessly from -40°C to +85°C (-40°F to 185°F). It prevents laser wavelength drift in freezing winter cell towers and prevents component failure in unventilated summer street cabinets.
Multi-Vendor Compatibility and DOM/DDM Diagnostics
Telecom operators require optics that integrate universally with edge routers and core switches while providing deep visibility into the physical layer across spanning distances.
Carrier-Grade Switch and Router Compatibility
Undergoing stringent hardware and EEPROM validation, the LS-BL554910-80I is natively recognized as a Dell GP-SFP-10GBX-D-80-I. It bypasses proprietary vendor lock-outs, ensuring immediate plug-and-play operation in Dell Networking platforms, as well as seamlessly operating in MSA-compliant routing equipment from Cisco, Juniper, and Nokia used in carrier environments.
Real-Time Digital Diagnostic Monitoring (DOM/DDM)
Integrated DOM/DDM (compliant with SFF-8472) provides network administrators with real-time access to operational telemetry. Through standard SNMP or switch CLI, NOC engineers can actively monitor Transceiver Temperature, TX Bias Current, Vcc Voltage, TX Optical Power, and RX Optical Power.
Remote Link Health and Preventive Maintenance
For outdoor and long-haul deployments, dispatching a technician is costly. DOM telemetry allows IT teams to monitor gradual RX power degradation caused by micro-bends in aging fiber or weather-induced splice degradation, enabling proactive maintenance scheduling before a hard link failure occurs.
Selection Guide and Deployment Considerations
Deploying 80km BiDi optics involves strict adherence to physical layer rules. Below are critical engineering guidelines to prevent hardware damage and ensure optimal transmission.
BiDi Wavelength Pairing Requirement
Bidirectional transceivers must be deployed in complementary pairs. Because this module transmits at 1550nm and receives at 1490nm (1550nm-TX/1490nm-RX), the switch at the remote end of the fiber MUST be equipped with the exact opposite transceiver model (1490nm-TX/1550nm-RX) to establish a link.
Fiber Type and Distance Matching
To achieve the rated 10Gbps transmission distance, your physical cabling must meet the following parameters:
- Fiber Standard: 9/125µm Single-Mode Fiber (OS1 or OS2; OS2 recommended for >50km)
- Connector Type: Simplex LC (UPC Polish)
- Max Cable Distance: 80km standard (Up to 100km depending on splice quality and fiber attenuation < 0.25 dB/km)
Common Deployment Mistakes in Long-Haul BiDi Networks
Avoid these frequent engineering errors to ensure a successful long-haul deployment:
- Receiver Burnout (Crucial): This module features a highly sensitive APD receiver with an overload threshold of -7dBm. Never connect these modules back-to-back on a short fiber (< 20km) without using an inline optical attenuator (e.g., 10dB). Doing so will permanently destroy the receiver.
- Mismatched Wavelength Pairs: Purchasing two identical 1550nm-TX/1490nm-RX modules will result in a failed link. Always order the matching pair.
- Contaminated End-Faces: Dust on a Simplex LC connector over an 80km link will cause severe back-reflection and fatal dispersion penalties. Always wet/dry clean connectors before insertion.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
10G SFP+ Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify GP-SFP-10GBX-D-80-I compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
10G SFP+ Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
SFP Download
Product Drawing
DELL Compatible 10G GP-SFP-10GBX-D-80-I FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































