HPE H3C Compatible 100BASE-T SFP Copper (100m,RJ-45,Compatible with JD089A-T)
P/N:
LP-01-TC
Manufacturer:
LINK-PP
Compatible Brand:
HPE
Compatible P/N:
JD089A-T
- Compatible Brands: HPE
- Form Factor: SFP
- Data Rate: 100M / 155M
- Distance: ≤100m
- Connector: RJ45
- P/N: LP-01-TC
- Manufacture: LINK-PP
- Compatible Brand: HPE
- Compatible P/N: JD089A-T
Product Specifications
| LINK-PP Part Number | LP-01-TC | HPE H3C Part Number | JD089A-T |
| Form Factor | SFP | Max Data Rate | 100Mbps |
| Media | Cat 5 / Cat 6 / Cat 6a | Max Cable Distance | 100m |
| Connector | RJ-45 | DOM Support | No |
| Commercial Temperature Range | 0°C to +70°C | Protocols | MSA Compliant |
HPE H3C JD089A-T Compatible 100BASE-T Copper RJ-45 SFP Transceiver Module
The LINK-PP LP-01-TC is a Small Form-Factor Pluggable (SFP) copper transceiver module engineered for 100BASE-T Fast Ethernet connectivity over Category 5, Category 6, or Category 6a unshielded twisted-pair (UTP) cabling. Featuring an integrated RJ-45 connector receptacle, it enables host networking hardware with standard SFP slots to interface directly with copper Ethernet infrastructures up to 100 meters.
Operating across a commercial temperature range of 0°C to +70°C, the module conforms to SFP Multi-Source Agreement (MSA) mechanical and electrical specifications. It is positioned as a compatible alternative to the HPE H3C JD089A-T for enterprise switches, security routers, industrial box PCs, and server network adapters requiring dedicated 100 Mbps copper links.
Network engineers should verify host port speed configuration, SGMII/SerDes port settings, and switch operating software compatibility against system requirements before volume deployment.
HPE H3C JD089A-T Compatible Design Positioning
The LP-01-TC is positioned as a compatible alternative to the HPE H3C JD089A-T for 100BASE-T copper Ethernet applications, providing hardware engineering and procurement teams with a potential second-source option for designs requiring comparable form factor, port speed, and electrical interface characteristics.
To ensure proper interoperability on existing or new networking equipment, engineering teams should confirm that the target SFP port supports 100 Mbps data rates (via SGMII or 100BASE-X SerDes configuration) and verify EEPROM identification parameters prior to field rollout.
SFP-to-Copper PHY Architecture and 100m Link Operation
Copper SFP transceivers bridge optical/host-side SerDes interfaces with standard twisted-pair Ethernet cables:
- Internal Physical-Layer PHY IC: The LP-01-TC incorporates an internal transceiver PHY that converts the host system's differential SFP interface into balanced 100BASE-T signals, providing full-duplex 100 Mbps communication over copper media.
- 100-Meter Reach over Category Cabling: Designed for standard structured wiring, the module supports cable runs up to 100 meters over Category 5, Category 6, or Category 6a cables, eliminating the need for media converters in legacy 100 Mbps drops.
- Standard RJ-45 Interface: Features a fully shielded RJ-45 receptacle with an integrated latch mechanism to ensure secure mechanical locking and reliable electrical contact with standard Ethernet patch cables.
Host Interoperability, EEPROM Access, and Diagnostics
Physical, electrical, and management interoperability conforms to established SFP standards:
1. SFP MSA Mechanical and Electrical Compliance
The module conforms to the SFP Multi-Source Agreement (INF-8074i). It features standard 20-pin gold card-edge fingers, an integrated bail latch for insertion and extraction, and an all-metal housing that provides EMI containment within standard SFP cages.
2. Two-Wire Serial EEPROM Interface
The LP-01-TC provides standard serial ID information compliant with the SFP MSA, accessible at I2C address A0h. The internal physical IC registers can also be addressed via the two-wire serial interface at address ACh, allowing the host system to query PHY configuration parameters.
3. Digital Optical Monitoring (DOM) Scope
Because the LP-01-TC is a copper transceiver utilizing an internal PHY IC rather than optical laser diodes or photo detectors, optical Digital Optical Monitoring (DOM / DDM per SFF-8472) is not applicable (DOM Support: No).
Architecture Comparison: 100M Copper SFP vs. Alternative SFP Modules
| Evaluation Metric | LP-01-TC 100BASE-T Copper SFP |
1000BASE-T Gigabit Copper SFP |
100BASE-FX Optical SFP (1310nm) |
|---|---|---|---|
| Data Rate | 100 Mbps (100BASE-T) | 10/100/1000 Mbps or 1000 Mbps | 100 Mbps (100BASE-FX) |
| Transmission Media | Cat 5 / Cat 6 / Cat 6a Copper | Cat 5e / Cat 6 / Cat 6a Copper | Multi-Mode Fiber (OM1/OM2) |
| Connector Interface | RJ-45 Receptacle | RJ-45 Receptacle | Duplex LC Optical Receptacle |
| Maximum Link Reach | 100 meters | 100 meters | Up to 2 km (over MMF) |
| DOM / DDM Support | No (Not applicable for copper) | No (Standard copper SFP) | Optional / Model-dependent |
| Primary Application | Direct 100M copper links via SFP cages | Gigabit copper network drops | Noise-immune long-reach fiber links |
Application Considerations for LP-01-TC
| Target Application Profile | Media / Reach | Primary Engineering Consideration |
|---|---|---|
| Enterprise Switches & Routers SFP Ports | Cat 5 / Cat 6 (Up to 100m) | Converts unused SFP cages into 100 Mbps copper ports for legacy device interconnects. |
| Legacy Fast Ethernet Device Aggregation | Cat 5 / Cat 5e (Up to 100m) | Direct connection to building automation controllers, legacy IP cameras, and 100M instrumentation. |
| Industrial Box PCs & Network Appliances | Cat 6 / Cat 6a (Up to 100m) | Eliminates external media converters, operating across a commercial 0°C to +70°C envelope. |
| Out-of-Band Management & Console Uplinks | Cat 5e (Up to 100m) | Provides isolated 100 Mbps copper management channels within data center switch fabrics. |
Engineering Verification Checklist
Before deploying the LP-01-TC in networking hardware, systems engineers should confirm the following parameters against host platform documentation:
- Host Port Speed Compatibility: Verify that the target SFP slot supports 100 Mbps operation (many 10G/25G SFP+ cages only support 1G/10G and do not negotiate down to 100M).
- SGMII / SerDes Port Configuration: Ensure the host switch port is configured for 100BASE-T / SGMII mode according to operating system guidelines.
- Cabling Infrastructure: Check that structured cabling conforms to Category 5, 5e, 6, or 6a standards within the 100-meter maximum length limit.
- EEPROM Identification: Verify that the host platform accepts MSA-compliant EEPROM identification for HPE H3C JD089A-T compatible modules.
- Thermal Conditions: Validate that the SFP cage environment remains within the specified 0°C to +70°C commercial operating range.
- Mechanical Cage Clearance: Ensure adequate clearance for RJ-45 cable boot and latch disengagement within the faceplate layout.
Frequently Asked Questions
Is the LINK-PP LP-01-TC compatible with HPE H3C switches requiring the JD089A-T?
The LP-01-TC is designed as a compatible alternative to the HPE H3C JD089A-T, providing 100BASE-T 100 Mbps copper connectivity over twisted-pair cabling with SFP MSA compliance. Engineers should verify host switch SFP slot speed capability and software release support before deployment.
What is the maximum transmission distance and supported cabling for this module?
The LP-01-TC supports transmission distances up to 100 meters (328 feet) over standard Category 5, Category 6, or Category 6a unshielded or shielded twisted-pair Ethernet cables.
Does the LP-01-TC support Digital Optical Monitoring (DOM)?
No. Digital Optical Monitoring (DOM) is an optical telemetry function for laser transmitters and photo detectors. Because the LP-01-TC is a copper transceiver utilizing an internal physical-layer PHY IC, DOM is not supported.
Can the LP-01-TC operate in any standard SFP or SFP+ port?
The module requires an SFP slot whose host PHY supports 100 Mbps data rates (via SGMII or 100BASE-X). While it physically fits standard SFP/SFP+ cages, dual-speed or multi-rate ports must be checked to confirm they support 100M operation rather than 1G/10G only.
How is module identification accessed on the host system?
The module provides standard serial ID data compliant with the SFP MSA, accessible via the 2-wire serial CMOS EEPROM protocol at I2C address A0h. Internal PHY registers are accessible at address ACh.
What is the operating temperature range for the LP-01-TC?
The LP-01-TC is rated for a commercial operating case temperature range of 0°C to +70°C, suitable for enterprise data center racks, wiring closets, and standard indoor network environments.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
100M / 155M SFP Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify JD089A-T compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
100M / 155M SFP Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
SFP Download
Product Drawing
HPE Compatible 100M / 155M JD089A-T FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































