LF5-SM5501-A0AC 155M 2x5 SFF Optical Transceiver Module
P/N:
LF5-SM5501-A0AC
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LF5-SM5501-A0AC
- Compatible Brands: LINK-PP
- Data Rate: 100M / 155M
- P/N: LF5-SM5501-A0AC
- Manufacture: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LF5-SM5501-A0AC
Product Specifications
| LINK-PP Part Number | LF5-SM5501-A0AC | Vendor Name | LINK-PP |
| Form Factor | SFF | Max Data Rate | 155Mbps |
| Wavelength | - | Max Cable Distance | - |
| TX Power | - | Receiver Sensitivity | - |
| Standard Temperature Range | 0 to 70°C | Protocols | - |
LINK-PP LF5-SM5501-A0AC 155Mbps 2x5 SFF Optical Transceiver Module for Telecom, ATM, and Industrial Fast Ethernet Networks
The LINK-PP LF5-SM5501-A0AC is a high-reliability, MSA-compliant 155Mbps 2x5 Small Form Factor (SFF) optical transceiver module engineered for low-speed telecommunications networks, industrial automation equipment, and embedded optical communication systems. Designed for direct PCB through-hole solder mounting, this fixed-configuration optical module provides a compact, vibration-resistant physical layer interface supporting data rates up to 200Mbps.
Fully compliant with the 2x5 standard package defined by the Small Form Factor Multi-Source Agreement (MSA), the module features a 10-pin dual-row through-hole solder footprint paired with a Duplex LC optical receptacle. Operating efficiently from a single power supply across standard commercial temperatures (0°C to +70°C), it equips system designers with a versatile optoelectronic engine for implementing FDDI, ATM 155, Fast Ethernet (100Mbps/125Mbps), SONET OC-3, and SDH STM-1 telecommunications links on embedded circuit boards.
Application Topologies and Deployment Scenarios
Unlike hot-pluggable SFP optics or larger legacy 1x9 transceivers, 2x5 SFF optical modules combine an ultra-compact PCB footprint with direct-solder mechanical stability, making them the preferred choice for fixed-port networking hardware and ruggedized industrial controllers.
Telecom SONET OC-3 / SDH STM-1 & ATM 155 Access Networks
In telecommunications access infrastructure, 155Mbps is the baseline transmission rate for SONET OC-3 (155.52Mbps) and SDH STM-1 optical framing. The LF5-SM5501-A0AC serves as the primary electro-optical conversion engine on line cards for Asynchronous Transfer Mode (ATM) switches, add-drop multiplexers (ADM), and optical network units (ONU), delivering deterministic, low-jitter payload delivery.
Industrial Automation & Fixed-Port Fast Ethernet Switches
In manufacturing plants, power substations, and processing facilities, networking hardware is subject to constant mechanical vibration and electrical noise. The soldered 10-pin footprint of this 2x5 SFF module eliminates the edge-connector fretting corrosion common in pluggable SFP cages, providing 24/7 continuous optical links for industrial Fast Ethernet switches and programmable logic controllers (PLCs).
Embedded Optical Interfaces and Media Converters
For embedded hardware designers building fixed-port media converters or optical network terminals (ONT), the 2x5 SFF package saves up to 50% PCB real estate compared to 1x9 packages while delivering superior immunity to Electromagnetic Interference (EMI) over copper RJ45 connections.
Physical Layer Design and Optoelectronic Architecture
Designed for embedded system integration, the LF5-SM5501-A0AC combines reliable optoelectronic components with standard differential logic interfacing.
2x5 SFF 10-Pin Through-Hole PCB Package Engineering
The module is housed in an industry-standard 2x5 Small Form Factor (SFF) package featuring a dual-row 10-pin through-hole solder footprint (5 pins per side on a 0.1-inch grid). Soldering the pins directly to the motherboard creates a permanent, low-resistance mechanical and electrical bond that withstands severe physical shock and thermal expansion cycles.
Low-Speed Optical Engine & High-Sensitivity Photodiode Receiver
The optical transmitter incorporates a high-reliability optical laser diode optimized for 100M/155M data rates, ensuring narrow spectral width and excellent extinction ratios. The receiving path features a high-responsivity PIN photodiode paired with a trans-impedance preamplifier (TIA) and limiting amplifier, enabling precise decoding of optical data streams over single-mode or multimode fiber runs.
PECL Differential Data Lines & Power Supply Noise Immunity
Operating efficiently across commercial temperatures, the module features PECL (Positive Emitter-Coupled Logic) or LVPECL differential data inputs and outputs. An integrated Signal Detect (SD) pin provides real-time logic indication to the host MAC or PHY controller when a valid optical signal is present on the receiving channel.
Multi-Vendor Interoperability and Standard Compliance
Manufactured to strict 2x5 SFF MSA specifications, the LF5-SM5501-A0AC ensures seamless drop-in interoperability across global PCB layouts.
SFF MSA 2x5 Standard Footprint & Pinout Conformance
The module strictly complies with the SFF MSA 2x5 mechanical and pinout standards. PCB layout engineers can drop the component directly into existing CAD footprints without modifying copper trace routing, power planes, or housing cutouts.
Multi-Protocol Conformance (Ethernet, FDDI, ATM, SONET, SDH)
The transceiver conforms to IEEE 802.3u 100BASE-FX, ANSI FDDI, ATM Forum, ITU-T G.957, and ANSI T1.646 physical layer standards, supporting multi-rate data streams from 100Mbps up to 200Mbps.
Selection Guide and Embedded Design Considerations
Integrating through-hole 2x5 SFF optical components onto printed circuit assemblies requires proper soldering and PCB layout techniques.
2x5 SFF Soldered Module vs. SFP Hot-Pluggable Module
- 2x5 SFF Module (This Product): Soldered directly to the PCB via 10 pins. Takes up ~50% less PCB area than 1x9 modules, offers maximum mechanical shock resistance, lower total unit cost, and includes an integrated LC duplex receptacle.
- SFP Module: Requires a metal cage, host connector, and hot-swappable logic. Higher total BOM cost, but allows field replacement without soldering.
Wave Soldering & PCB Assembly Guidelines
- Soldering Profile: Standard wave soldering processes (up to 260°C for <10 seconds) are supported on the electrical pins.
- Protective Dust Cap: Keep the factory optical dust cap inserted in the Duplex LC port throughout wave soldering and board washing processes to prevent flux fumes and aqueous solvents from contaminating internal optical lenses.
- Decoupling Capacitors: Place 0.1µF ceramic decoupling capacitors as close as possible to the Vcc/VEE power pins on the PCB ground plane to suppress high-frequency switching noise.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
100M / 155M Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify LF5-SM5501-A0AC compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
100M / 155M Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
SFP Download
Product Drawing
LINK-PP Compatible 100M / 155M LF5-SM5501-A0AC FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































