L9-SD311G-20PTC 1.25Gbps 1310nm 20km 3.3V Single-Mode Dual SC 1×9 Optical Transceiver
P/N:
L9-SD311G-20PTC
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
L9-SD311G-20PTC
- Compatible Brands: LINK-PP
- Data Rate: 1.25G
- Distance: ≤20km
- Type: Single Mode
- Connector: Duplex SC
- Wavelength: 1310nm
- P/N: L9-SD311G-20PTC
- Manufacture: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: L9-SD311G-20PTC
Product Specifications
| LINK-PP Part Number | L9-SD311G-20PTC | Vendor Name | LINK-PP |
| Form Factor | 1x9 | Max Data Rate | 1.25Gbps |
| Wavelength | 1310nm | Max Cable Distance | 20km |
| Connector | Duplex SC | Optical Components | DFB/PIN |
| Fiber Type | SMF | Supply Voltage | 3.3V |
| Receiver Sensitivity | <-23dBm | Operating Temperature Range | 0 to 70°C |
| Application | WDM Application,SDH STM-8/ SONET OC-24,Gigabit Ethernet | ||
LINK-PP L9-SD311G-20PTC 1.25Gbps 1x9 Optical Transceiver (3.3V, SMF, 1310nm, 20km, Duplex SC) for Embedded Ethernet and Telecom Systems
The LINK-PP L9-SD311G-20PTC is a high-reliability 1.25Gbps 1x9 Single In-line Package (SIP) optical transceiver engineered for embedded Gigabit Ethernet (1000BASE-LX), SDH STM-8 / SONET OC-24 telecom equipment, and WDM access networks. Designed for direct PCB through-hole solder mounting, this fixed-configuration optical module provides a ruggedized, vibration-resistant electro-optical interface for industrial systems and media conversion hardware.
Operating from a single +3.3V power supply, the module integrates a high-reliability 1310nm laser transmitter and a high-sensitivity PIN photodiode receiver paired with a trans-impedance preamplifier (TIA). Delivering a maximum reach of 20 kilometers over OS2 Single-Mode Fiber (SMF) with a receiver sensitivity better than -23dBm, the module features a Duplex SC optical receptacle. Built with PECL-compatible differential data inputs/outputs and TTL or LVPECL receiver Signal Detect (SD) indication, it offers hardware layout engineers a dependable optical engine compliant with 1x9 industry standards and ITU-T G.957 specifications.
Application Topologies and Deployment Scenarios
1x9 optical transceivers are permanently soldered to host circuit boards, providing superior mechanical connection strength compared to edge-connector SFP modules in fixed-port networking hardware.
Telecom SDH STM-8 / SONET OC-24 & WDM Edge Nodes
In Synchronous Digital Hierarchy (SDH) and SONET optical transport systems, the L9-SD311G-20PTC serves as an embedded physical layer interface supporting STM-8 (622.08Mbps) and OC-24 data rates. It enables reliable long-reach optical transmission between regional access multiplexers, WDM edge terminals, and cellular base station controllers across 20km single-mode spans.
Gigabit Ethernet Media Converters & Industrial Switches
The module is widely deployed as the optical core in unmanaged and managed 10/100/1000BASE-T to 1000BASE-LX media converters. Soldered directly to the main board, it converts copper Ethernet signals to 1310nm single-mode optical links, extending local area networks across municipal security networks, traffic monitoring systems (ITS), and substation automation setups.
Switched Backplanes and Broadband Aggregation
In high-density broadband access shelves and industrial Ethernet switches, this transceiver provides a cost-effective, fixed switch-to-switch backplane interconnect. Its soldered footprint resists thermal stress and physical shock, ensuring uninterrupted link operation in remote outdoor cabinets.
Physical Layer Design and Optoelectronic Architecture
Engineered for embedded PCB integration, the L9-SD311G-20PTC combines high-performance optical emitters with robust differential logic interfacing.
1310nm Laser Transmitter & High-Sensitivity PIN Receiver
The optical transmitter utilizes a high-reliability 1310nm laser, providing narrow spectral emission and excellent extinction ratios over 1.25Gbps signaling. The receiving path features a high-responsivity PIN photodiode array capable of detecting optical power down to <-23dBm. This provides a generous optical link budget for 20km OS2 single-mode runs, allowing the link to tolerate insertion losses from intermediate patch panels and fiber splices.
Through-Hole 1x9 Package Engineering & Mechanical Resilience
Housed in an industry-standard 1x9 plastic package, the transceiver features 9 through-hole electrical solder pins surrounding a Duplex SC optical port. Soldering the pins directly to the PCB establishes an immovable mechanical anchor, protecting delicate internal wire bonds from mechanical stress when optical SC jumpers are plugged or unplugged.
3.3V PECL Data Interface & TTL Signal-Detect (SD) Logic
Operating on a single +3.3V DC power supply, the module features PECL/LVPECL differential data inputs and outputs (TD+, TD-, RD+, RD-). The "PTC" variant provides a user-configurable TTL or LVPECL Signal-Detect (SD) output pin (Pin 4), delivering a clear, noise-immune logic signal directly readable by system microcontrollers, FPGA logic, or MAC controllers to indicate optical link presence.
Multi-Vendor Interoperability and Standard Compliance
Manufactured to strict 1x9 multi-source specifications, the L9-SD311G-20PTC ensures seamless drop-in replacement across global PCB layouts.
Industry-Standard 1x9 Footprint & Pinout Compatibility
Featuring standard 1x9 pin spacing and electrical assignments, this transceiver acts as a direct replacement for legacy 1x9 1.25G modules. Layout engineers can drop the component into existing CAD footprints without modifying PCB copper trace routing, power planes, or housing cutouts.
Multi-Protocol Conformance (Ethernet, SDH, SONET)
The transceiver conforms to IEEE 802.3z 1000BASE-LX, ITU-T G.957, and ANSI T1.646 physical layer standards. It supports multi-rate data streams from 100Mbps up to 1.25Gbps, ensuring seamless auto-negotiation between disparate Ethernet and telecom framing hardware.
Selection Guide and Embedded Design Considerations
Integrating through-hole 1x9 optical components onto printed circuit assemblies requires proper soldering and PCB layout techniques.
L9-SD311G-20PTC (TTL SD) vs. PECL SD Variants
- L9-SD311G-20PTC (This Module): Features TTL or LVPECL Signal Detect logic on Pin 4. Ideal for interfacing directly with host processors or Ethernet PHYs that expect standard 0V/3.3V logic levels.
- PECL SD Variants: Feature PECL differential Signal Detect levels requiring external pull-down resistor networks on the host board.
Wave Soldering & PCB Board Assembly Best Practices
- Soldering Profile: Standard wave soldering processes (up to 260°C for <10 seconds) are supported on the electrical pins.
- Protective Dust Plug: Keep the factory optical dust plug inserted in the Duplex SC port throughout wave soldering and board washing to prevent flux fumes and aqueous solvent contamination on internal lenses.
- Power Supply Decoupling: Place 0.1µF and 10µF bypass capacitors in close physical proximity to Pin 5 (Rx Vcc) and Pin 6 (Tx Vcc) on the PCB ground plane to minimize high-frequency switching noise.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
1.25G Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify L9-SD311G-20PTC compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
1.25G Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
SFP Download
Product Drawing
LINK-PP Compatible 1.25G L9-SD311G-20PTC FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































