HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LS-SM311G-40I-1.webp
  • LS-SM311G-40I-2.webp
  • LS-SM311G-40I-3.webp
  • LS-SM311G-40I-4.webp
  • LS-SM311G-40I-5.webp

Cisco GLC-EX-SMD Compatible 1000BASE-EX SFP 1310nm 40km Duplex LC SMF DOM Transceiver Module

P/N:

LS-SM311G-40I

Manufacturer:

LINK-PP

Classification:

Compatible Brand:

Cisco

Compatible P/N:

GLC-EX-SMD

  • Compatible Brands: Cisco
  • Form Factor: SFP
  • Data Rate: 1.25G
  • Distance: ≤40km
  • Type: Single Mode
  • Connector: Duplex LC
  • Wavelength: 1310nm
  • P/N: LS-SM311G-40I
  • Manufacture: LINK-PP
  • Compatible Brand: Cisco
  • Compatible P/N: GLC-EX-SMD

Product Specifications

LINK-PP Part Number LS-SM311G-40I Cisco Compatible GLC-EX-SMD
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1310nm Max Cable Distance 40km
Connector Duplex LC Optical Components DFB 1310nm
Media SMF DOM Support Yes
TX Power -5 to 0dBm RX Power -23 to -1dBm
Receiver Sensitivity <-23dBm Receiver Overload -1dBm
Industrial Temperature Range -40 to 85°C Protocols SFF-8472 MSA Compliant, IEEE 802.3ah-2004

Cisco GLC-EX-SMD Compatible LINK-PP LS-SM311G-40I Industrial 1000BASE-EX SFP Transceiver Technical Overview

The LINK-PP LS-SM311G-40I (engineered as an industrial-grade, 100% optical and EEPROM drop-in replacement for Cisco GLC-EX-SMD) is an extended-reach 1000BASE-EX SFP optical transceiver module delivering 1.25 Gbps Gigabit Ethernet data transmission over 40 km on standard 9/125µm Single-Mode Fiber (SMF, G.652) via Duplex LC/UPC connectors across an industrial temperature range of -40°C to +85°C. Powered by a 1310nm DFB laser transmitter (-5 to 0 dBm TX power), a high-sensitivity PIN receiver (<-23 dBm sensitivity), and an SFF-8472 compliant Digital Optical Monitoring (DOM) interface, it provides an 18 dB optical power budget for smart grid substations, roadside ITS cabinets, and outdoor telecom cell sites.

  • Industrial Temperature Endurance (-40°C to +85°C): Built with industrial-rated optoelectronic components to operate reliably in unconditioned outdoor traffic cabinets, utility substations, and harsh industrial environments.
  • 40km Extended-Reach 18 dB Optical Budget: Combines a 1310nm DFB laser transmitter and PIN receiver to establish an 18 dB optical link budget (-5 dBm min TX to -23 dBm RX sensitivity) across 40 km G.652 SMF spans.
  • Real-Time Digital Optical Monitoring (DOM): SFF-8472 compliant 2-wire I2C diagnostic interface tracking optical TX power, optical RX power, laser bias current, supply voltage, and internal transceiver temperature.
  • Cisco Industrial & Enterprise Interoperability: Pre-programmed with Cisco vendor-specific EEPROM data maps, guaranteeing seamless plug-and-play operation in Cisco Industrial Ethernet (IE) switches, Catalyst backbones, and ASR routers without triggering vendor alarms.

LINK-PP LS-SM311G-40I 1000BASE-EX Industrial SFP Transceiver Overview

LINK-PP LS-SM311G-40I is a hot-pluggable industrial-grade 1.25Gbps SFP optical transceiver module engineered for extended-reach single-mode fiber links up to 40 kilometers. Featuring a 1310nm DFB laser, a PIN photodiode receiver, Duplex LC optical interfaces, and full Digital Optical Monitoring (DOM) capabilities, this module maintains clean optical eye diagrams and low bit error rates (BER < 10^-12) across -40°C to +85°C ambient temperatures. Pre-coded and tested for complete interoperability with Cisco networking hardware, it serves as a fully qualified, cost-effective secondary-source replacement for Cisco GLC-EX-SMD OEM transceivers.

Key Benefits of LINK-PP LS-SM311G-40I / Cisco GLC-EX-SMD Compatible Transceiver

  • Industrial Operating Temperature Envelope (-40°C to +85°C): Designed to withstand extreme cold and heat in outdoor roadside enclosures, utility pole boxes, and unconditioned factory environments.
  • Seamless Cisco Hardware Interoperability: Pre-loaded with Cisco-compatible EEPROM coding, bypassing non-Cisco optical warnings in Cisco IOS, IOS-XE, and NX-OS operating systems for true plug-and-play deployment.
  • High-Performance 1310nm DFB Optics for 40km Reach: Utilizes a precision 1310nm DFB laser and PIN receiver engine engineered to overcome fiber attenuation and chromatic dispersion over 40 km G.652 single-mode fiber backbones.
  • 18 dB Optical Power Budget (-5 dBm TX Min to -23 dBm RX Sensitivity): High receiver sensitivity (<-23 dBm) provides ample optical power margin for long-distance municipal and industrial fiber runs.
  • Real-Time Diagnostic Telemetry via SFF-8472 DOM: Features an integrated MCU control unit providing real-time telemetry tracking of TX power, RX power, bias current, temperature, and VCC voltage directly via switch CLI or SNMP tools.
  • Hot-Pluggable SFP MSA Compliant Form Factor: Easily inserted or removed from active SFP switch ports without interrupting host equipment power or adjacent optical links.

1000BASE-EX Optical Link Budget & 1310nm DFB Architecture

The LINK-PP LS-SM311G-40I is built on a high-reliability 1000BASE-EX electro-optic engine adhering to SFF-8472 diagnostic and SFP MSA mechanical specifications. Designed for 1.25 Gbps serial optical communications, it maintains low jitter and high optical signal-to-noise ratio (SNR).

1310nm DFB Laser & -23 dBm PIN Receiver Sensitivity

The optical transmitter incorporates a precision 1310nm Distributed Feedback (DFB) laser diode operating with an average TX power between -5 dBm and 0 dBm. On the receive side, a high-sensitivity PIN photodiode combined with a Trans-Impedance Preamplifier (TIA) provides an optical sensitivity of <-23 dBm and a receiver overload threshold of -1.0 dBm. This establishes an 18 dB optical power budget, allowing 40 km SMF transmission with margin for patch panel connectors and fiber splices.

SFF-8472 Digital Optical Monitoring (DOM) Diagnostics

Utilizing an I2C 2-wire serial interface mapped to memory address A2h per SFF-8472, the module provides real-time DOM telemetry. Network administrators can query live transceiver operating parameters—including optical input/output power in dBm or mW—allowing proactive network maintenance and link fault isolation in remote industrial locations.

Cisco Switch Interoperability & Industrial Deployment

Deploying optical transceivers in harsh industrial cabinets requires strict vendor EEPROM coding and thermal endurance.

Cisco IE Series & Catalyst Plug-and-Play EEPROM

Each transceiver is flashed with accurate Cisco vendor data, part numbers, and serial numbers. Upon insertion into Cisco Industrial Ethernet (IE3000, IE4000, IE5000), Catalyst, or ASR routers operating in -40°C to +85°C cabinets, the host operating system recognizes the module instantly as an OEM GLC-EX-SMD optics module without requiring manual CLI overrides or throwing `UNSUPPORTED_TRANSCEIVER` syslog warnings.

Target Applications: Smart Grid Substations, Roadside ITS, and Outdoor Telecom

Combining 1.25Gbps speed, 1310nm DFB optics, 18 dB power budget, SFF-8472 DOM telemetry, and Cisco compatibility, the LINK-PP LS-SM311G-40I supports critical optical infrastructure:

  • Smart Grid Power Substation Automation (IEC 61850): Ideal for long-distance fiber connections between electric utility substations and control centers operating in harsh thermal environments.
  • Intelligent Transportation Systems (ITS) Roadside Cabinets: Deployed in traffic signal control boxes, highway surveillance networks, and electronic tolling gateways.
  • Outdoor Telecom Cell Site Backhaul & Metro Fiber: Suitable for wireless baseband unit backhaul, remote radio heads, and municipal fiber rings up to 40 km.

How to Select and Verify LINK-PP LS-SM311G-40I SFP Module

Network architects and industrial systems engineers evaluating the LINK-PP LS-SM311G-40I should verify the following core parameters:

  • Optical Cable Matching (SMF 9/125µm vs MMF): Confirm that your installed optical fiber infrastructure uses 9/125µm Single-Mode Fiber (SMF, G.652) with Duplex LC/UPC connectors, as 1000BASE-EX optics are incompatible with multi-mode fiber (MMF).
  • Optical Power Budget Calculation: Calculate total fiber link loss (40 km * ~0.35 dB/km = 14 dB + patch panel loss) to ensure total optical attenuation remains within the 18 dB power budget.
  • Industrial Operating Temperature Match: Confirm that the -40°C to +85°C industrial temperature rating satisfies your unconditioned outdoor cabinet or substation environment spec.
  • DOM Telemetry & Cisco CLI Verification: Verify transceiver status via Cisco IOS CLI commands such as `show interfaces transceiver` to inspect live optical launch and receive power levels.

Frequently Asked Questions

What is LINK-PP LS-SM311G-40I?

LINK-PP LS-SM311G-40I is an industrial-grade 1.25Gbps 1000BASE-EX SFP optical transceiver module operating at 1310nm over single-mode fiber (SMF) up to 40 km with Duplex LC connectors, DOM support, and an extended temperature range of -40°C to +85°C.

What cable type and maximum distance are supported by LS-SM311G-40I?

The module operates at 1310nm over standard 9/125µm Single-Mode Fiber (SMF, G.652) using Duplex LC connectors, supporting maximum link distances up to 40 kilometers (24.8 miles).

What is the operating temperature range of LS-SM311G-40I?

LINK-PP LS-SM311G-40I is rated for an extended industrial operating temperature range of -40°C to +85°C (-40°F to +185°F), making it suitable for unconditioned outdoor cabinets, roadside ITS boxes, and power substations.

What optical components are used in LS-SM311G-40I?

LINK-PP LS-SM311G-40I incorporates a high-stability 1310nm DFB (Distributed Feedback) laser transmitter (-5 to 0 dBm) and a PIN photodiode receiver with integrated TIA preamplifier achieving <-23 dBm sensitivity.

Does LS-SM311G-40I support Digital Optical Monitoring (DOM)?

Yes. The module features full DOM / DDM diagnostic support per SFF-8472, providing real-time telemetry monitoring for TX power, RX power, bias current, supply voltage, and internal temperature via switch software.

Will using LINK-PP LS-SM311G-40I void my Cisco switch warranty?

No. Networking hardware vendors cannot void equipment warranties simply for using third-party MSA-compliant optical transceivers (per Magnuson-Moss Warranty Act). LINK-PP modules are fully tested to ensure safe electrical and thermal operation in Cisco equipment.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

1.25G SFP Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify GLC-EX-SMD compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

1.25G SFP Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

SFP Download