HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LS-SM311G-10C-1.webp
  • LS-SM311G-10C-2.webp
  • LS-SM311G-10C-3.webp
  • LS-SM311G-10C-4.webp
  • LS-SM311G-10C-5.webp

Cisco GLC-LH-SM Compatible 1000BASE-LX/LH SFP 1310nm 10km Duplex LC SMF DOM Transceiver Module

P/N:

LS-SM311G-10C

Manufacturer:

LINK-PP

Classification:

Compatible Brand:

Cisco

Compatible P/N:

GLC-LH-SM

  • Compatible Brands: Cisco
  • Form Factor: SFP
  • Data Rate: 1G
  • Distance: ≤10km
  • Type: Single Mode
  • Connector: Duplex LC
  • Wavelength: 1310nm
  • P/N: LS-SM311G-10C
  • Manufacture: LINK-PP
  • Compatible Brand: Cisco
  • Compatible P/N: GLC-LH-SM

Product Specifications

LINK-PP Part Number LS-SM311G-10C Cisco Compatible GLC-LH-SM
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1310nm Max Cable Distance 10km
Connector Duplex LC Optical Components FP 1310nm
Media SMF DOM Support Yes
TX Power -9 to 0 dBm RX Power -23 to -1 dBm
Receiver Sensitivity -23 dBm Receiver Overload -1 dBm
Operating Case Temperature 0°C to +70°C Protocols IEEE 802.3ah-2004, IEEE 802.3z, SFF-8472, SFP MSA (INF-8074i) Compliant

1000BASE-LX/LH 1.25Gbps SFP Optical Transceiver Module for Gigabit Campus and Metro Fiber Links

The LINK-PP LS-SM311G-10C is a small form-factor pluggable (SFP) optical transceiver module designed for 1000BASE-LX/LH Gigabit Ethernet and 1G Fiber Channel interconnects. Operating over single-mode fiber (SMF) at a nominal wavelength of 1310 nm, it incorporates an uncooled Fabry-Pérot (FP) laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA), and an MCU control unit supporting real-time Digital Optical Monitoring (DOM / DDM) per SFF-8472.

The module is engineered to provide up to 10 km optical transmission distance over standard G.652 single-mode fiber, featuring a duplex LC optical interface and an operating case temperature range of 0°C to +70°C. It is positioned as a compatible alternative to the Cisco GLC-LH-SM transceiver for enterprise switches, routers, and optical transmission platforms.

System integrators should verify host platform EEPROM compatibility, port speed configuration, and optical link power budgets against network design requirements before deployment.

Data Rate: 1.25 Gbps (1000BASE-LX/LH)
Form Factor: Hot-Pluggable SFP
Optical Engine: 1310nm FP Laser + PIN Receiver
Reach: Up to 10 km over SMF
Optical Interface: Duplex LC Receptacle
Diagnostics: Digital Optical Monitoring (SFF-8472)

Optical Power Budget and Link Margin Considerations

Designing a reliable 10 km optical link requires calculating the overall optical power budget to ensure received signal power stays within the dynamic range of the PIN receiver:

  • Transmitter Launch Power: -9 dBm (minimum) to 0 dBm (maximum) into 9/125 µm single-mode fiber.
  • Receiver Sensitivity: -23 dBm (maximum input power required for bit error rate compliance).
  • Available Optical Power Budget: Minimum transmitter launch power (-9 dBm) minus receiver sensitivity (-23 dBm) provides a 14 dB optical power budget.
  • Receiver Overload Threshold: -1 dBm maximum input power before non-linear saturation or optical damage occurs.

At a standard attenuation coefficient of ~0.35 dB/km for G.652 fiber at 1310 nm, a 10 km link typically introduces ~3.5 dB of fiber attenuation. The remaining margin accommodates connector insertion losses, patch panel splices, and environmental aging degradations.

Optical Architecture: FP Laser, PIN-TIA Receiver, and DOM Telemetry

The internal electro-optical architecture of the LS-SM311G-10C integrates several physical-layer functions into a hot-pluggable enclosure:

1. 1310nm Fabry-Pérot (FP) Transmitter

The transmitter subsystem utilizes an uncooled 1310 nm FP laser diode driven by a dedicated laser driver IC with automatic power control (APC) circuitry. This maintains stable optical output power and extinction ratio across the 0°C to +70°C operating temperature range.

2. PIN-TIA Photodetector Assembly

The receiver subsystem integrates a high-speed PIN photodiode and trans-impedance preamplifier (TIA) coupled to a limiting post-amplifier, converting incoming 1310 nm optical pulses into differential CML electrical signals for the host SERDES interface.

3. Real-Time Digital Optical Monitoring (SFF-8472)

An internal MCU provides access to real-time operating parameters via a 2-wire I2C serial interface (address A2h). Network management systems can monitor:

  • Transceiver internal operating temperature
  • Supply voltage (3.3V rail)
  • Laser bias current
  • Transmitter optical output power (TX Power)
  • Received optical power (RX Power)

Host System Compatibility and Mechanical Integration

Physical and electrical interoperability requires alignment with SFP industry standards:

1. SFP MSA Mechanical Compliance

The module conforms to the SFP Multi-Source Agreement (INF-8074i). It features a standardized 20-pin card-edge connector, an integrated bail latch for insertion and extraction, and an all-metal housing providing EMI shielding within standard SFP cages.

2. Duplex LC Optical Receptacle

The optical interface uses an industry-standard duplex LC receptacle supporting standard LC/UPC single-mode fiber patch cables.

3. Host EEPROM Interoperability

The module contains factory-programmed serial ID data stored at I2C address A0h per SFF-8472 and SFP MSA specifications, enabling automatic port recognition on Cisco equipment supporting GLC-LH-SM transceivers as well as other multi-vendor networking devices.

Architecture Comparison: 1G Optical SFP Transceiver Variants

Evaluation Metric LS-SM311G-10C
(1000BASE-LX/LH 10km)
1000BASE-SX
(Short-Reach Multi-Mode)
1000BASE-ZX
(Long-Haul Single-Mode)
Nominal Wavelength 1310 nm 850 nm 1550 nm
Optical Light Source FP Laser VCSEL DFB Laser
Fiber Media Type Single-Mode Fiber (SMF) Multi-Mode Fiber (OM2/OM3/OM4) Single-Mode Fiber (SMF)
Maximum Link Reach Up to 10 km Up to 550 m (OM2/OM3) Up to 80 km
Minimum Optical Budget 14 dB (-9 dBm TX / -23 dBm RX) ~7.5 dB (-9.5 dBm TX / -17 dBm RX) ~24 dB (0 dBm TX / -24 dBm RX)
Primary Application Campus core, inter-building, metro Intra-datacenter, short rack-to-rack Regional metro, extended telecom spans

Application Considerations for LS-SM311G-10C

Target Application Profile Recommended Fiber Media Primary Engineering Consideration
Enterprise Campus Backbone & Inter-Building Links G.652 Single-Mode Fiber (Duplex LC) 10 km optical reach bridges distributed campus aggregation switches with low latency and zero copper ground loop concerns.
Metropolitan Gigabit Access & FTTx Aggregation G.652 Single-Mode Fiber (Duplex LC) SFF-8472 DOM telemetry allows remote optical health monitoring from the central network operations center (NOC).
Data Center Out-of-Band & Management Networks Single-Mode Fiber (Duplex LC) Provides isolated, point-to-point Gigabit uplinks across enterprise server rows without electromagnetic interference.
Industrial Gateway & Remote Terminal Uplinks Single-Mode Fiber (Duplex LC) 0°C to +70°C operating temperature envelope; compact SFP form factor for switch and router expansion slots.

Frequently Asked Questions

Is the LINK-PP LS-SM311G-10C compatible with switches requiring Cisco GLC-LH-SM?

The LS-SM311G-10C is engineered as a compatible alternative to the Cisco GLC-LH-SM, supporting 1000BASE-LX/LH 1.25 Gbps transmission at 1310 nm over single-mode fiber with SFF-8472 DOM telemetry. Network engineers should verify host hardware compatibility and switch operating software configuration prior to production deployment.

What is the optical link budget and reach of this SFP transceiver?

The module features a minimum launch power of -9 dBm and a receiver sensitivity of -23 dBm, providing a 14 dB optical power budget. This is designed to support link distances up to 10 km over standard G.652 single-mode fiber, depending on cable attenuation and connector insertion losses.

What parameters are monitored by the Digital Optical Monitoring (DOM) feature?

Per SFF-8472 standards, the integrated DOM interface allows real-time monitoring of transceiver internal temperature, supply voltage, laser bias current, transmitted optical power (TX Power), and received optical power (RX Power) via the I2C management bus.

Can the LS-SM311G-10C be used over multimode fiber (MMF)?

Per IEEE 802.3z 1000BASE-LX specifications, 1310 nm transceivers can operate over legacy multimode fiber (up to 550 m) when used with a specialized mode-conditioning patch cord to prevent differential mode delay (DMD). For standard deployments without mode-conditioning cords, single-mode fiber (SMF) is recommended.

What are the receiver sensitivity and overload thresholds for this module?

The receiver sensitivity is rated at -23 dBm, representing the lowest optical power required for reliable signal reception. The receiver overload threshold is -1 dBm, which represents the maximum safe input optical power to prevent detector saturation.

Which industry standards does this SFP transceiver comply with?

The LS-SM311G-10C complies with IEEE 802.3z (Gigabit Ethernet), IEEE 802.3ah-2004, SFF-8472 (Digital Diagnostic Monitoring Interface), SFP Multi-Source Agreement INF-8074i, and Class 1 laser safety standards.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

1G SFP Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify GLC-LH-SM compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

1G SFP Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

SFP Download