HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LP-SFP-TMRI-1.webp
  • LP-SFP-TMRI-2.webp
  • LP-SFP-TMRI-3.webp
  • LP-SFP-TMRI-4.webp
  • LP-SFP-TMRI-5.webp

Generic Compatible 10/100/1000BASE-T SFP Copper (100m,RJ-45,Compatible with SFP-GB-GE-T)

P/N:

LP-SFP-TMRI

Manufacturer:

LINK-PP

Classification:

Compatible Brand:

Generic

Compatible P/N:

SFP-GB-GE-T

  • Compatible Brands: Generic
  • Form Factor: SFP
  • Data Rate: 10/100/1000BASE-T
  • Distance: ≤100m
  • Connector: RJ45
  • P/N: LP-SFP-TMRI
  • Manufacture: LINK-PP
  • Compatible Brand: Generic
  • Compatible P/N: SFP-GB-GE-T

Product Specifications

LINK-PP Part Number LP-SFP-TMRI Generic Compatible SFP-GB-GE-T
Part Status Active Form Factor SFP SGMII
Max. Data Rate 1000Mbps Max. Cable Distance 100m
Media Cat 6/Cat 6a Connector RJ-45
Rx LOS NO DOM Not Supported
Commercial Temperature Range 0 to 70°C Protocols MSA Compliant, IEEE STD 802.3 and 802.3ab
EMC (Electro Magnetic Compatibility) Supported Warranty 5 Years

LINK-PP LP-SFP-TMRI Technical & Compatibility Overview

The LINK-PP LP-SFP-TMRI is a hot-pluggable SFP SGMII 10/100/1000BASE-T Copper Small Form-factor Pluggable (SFP) transceiver module designed for tri-speed Gigabit Ethernet copper links. Engineered as a functional and MSA-compatible alternative to the Generic SFP-GB-GE-T, it converts host SGMII interfaces to a standard RJ-45 female receptacle, supporting 10/100/1000 Mbps auto-negotiation up to 100 meters (328 feet) over Category 6 or Cat 6a unshielded twisted-pair (UTP) cabling. Built in accordance with IEEE 802.3, IEEE 802.3ab, and SFP Multi-Source Agreement (MSA) standards, it enables flexible copper connectivity across multi-vendor networking environments.

  • Universal Switch & Router Compatibility: Standard MSA EEPROM identification ensures broad multi-vendor compatibility across open-architecture switches, routers, and server NICs.
  • SFP SGMII Interface with Tri-Speed Auto-Negotiation: Supports 10/100/1000 Mbps data rates with automatic MDI/MDIX crossover detection over Category 6/6a copper cabling.
  • 1000BASE-T Copper Reach (100m): Delivers full 1 Gbps Gigabit Ethernet throughput up to 100 meters over structured copper cable plants.
  • Standard Shielded RJ-45 Interface: Integrates a female RJ-45 connector with built-in metallic shielding and EMC protection for direct attachment to twisted-pair patch cords.

Key Design Benefits

  • Multi-Vendor Switch Interoperability: Engineered with standard MSA EEPROM coding for plug-and-play operation across multi-brand enterprise switches, routers, and firewalls.
  • Tri-Speed 10/100/1000BASE-T Auto-Negotiation: SGMII host interface enables automatic rate matching between legacy 10/100 Mbps devices and Gigabit switch ports.
  • Copper Cable Plant Utilization: Connects SFP optical switch slots directly to existing RJ-45 Cat 6/Cat 6a copper patch panels without requiring external media converters.
  • Hot-Pluggable SFP Form Factor: Enables module insertion and replacement in active switch or router ports without interrupting host chassis power.
  • Second-Source Supply Continuity: Offers network engineering and procurement teams a qualified alternative to mitigate component lead times and single-source risks.

Electrical Architecture & Signal Processing

The LP-SFP-TMRI incorporates a Gigabit Ethernet copper PHY transceiver chip within the metallic SFP module body.

SGMII PHY SERDES Conversion

The internal PHY converts host-side SGMII/SERDES electrical signals into 1000BASE-T pulse-amplitude modulation (PAM-5) signals required for four-pair Category 6/6a copper transmission per IEEE 802.3ab specifications.

Digital Diagnostics Monitoring (DDM/DOM) Note

In alignment with standard 1000BASE-T copper SFP module specifications (including Generic SFP-GB-GE-T), DDM/DOM monitoring and Rx Loss of Signal (Rx LOS) are not supported, as copper PHY architectures do not utilize optical lasers or photodiodes.

Mechanical & Environmental Specifications

The LP-SFP-TMRI features an industry-standard metallic SFP body with a spring-latching bail mechanism for secure port locking and removal. The front interface consists of a shielded RJ-45 female jack compatible with Cat 6 and Cat 6a UTP cables. The module operates within a commercial case temperature range of 0°C to 70°C and carries a 5-year warranty.

Target Applications

  • Multi-Vendor Switch & Router Uplinks: 1 Gbps copper interconnects between distribution switches, routers, and server racks.
  • Data Center Top-of-Rack (ToR) Interconnects: Short-distance copper connections between SFP switch ports and server RJ-45 Gigabit network cards.
  • Tri-Speed Legacy Network Integration: Adapts SFP slots for direct communication with legacy 10 Mbps and 100 Mbps Ethernet edge devices.

Generic SFP-GB-GE-T Replacement Compatibility Checklist

When evaluating the LINK-PP LP-SFP-TMRI as an alternative to Generic SFP-GB-GE-T, network engineers should verify the following parameters against their system specification:

  • Cabling Media & Distance Verification: Confirm unshielded twisted-pair (UTP Cat 6/6a) cable infrastructure up to 100 meters (328 ft).
  • Host SGMII Interface Compatibility: Confirm that the host SFP slot supports SGMII interface protocols for 10/100/1000 Mbps tri-speed operation.
  • Port Speed & Operating Mode: Confirm that the target SFP port is rated for 1000BASE-T Gigabit Ethernet operation.
  • Operating Temperature Class: Verify that the 0°C to 70°C commercial temperature class matches your indoor switch room environment.

Frequently Asked Questions

Is LINK-PP LP-SFP-TMRI compatible with multi-vendor switches as an alternative to Generic SFP-GB-GE-T?

Yes. The LP-SFP-TMRI is engineered with SFP SGMII MSA compliance, 10/100/1000BASE-T copper PHY specs, 100m reach over Cat6/6a, and standard EEPROM settings to serve as a functional drop-in alternative for Generic SFP-GB-GE-T across open-architecture and multi-vendor switch SFP slots.

Does the LINK-PP LP-SFP-TMRI support Digital Optical Monitoring (DOM/DDM)?

No. Standard 1000BASE-T copper SFP modules (including Generic SFP-GB-GE-T and LP-SFP-TMRI) do not support DDM/DOM functions, as copper transceivers do not contain optical lasers or photodiode receivers to measure optical power.

What is the advantage of the SFP SGMII interface on the LP-SFP-TMRI?

The SFP SGMII interface enables tri-speed auto-negotiation, allowing the module to seamlessly bridge 10BASE-T, 100BASE-TX, and 1000BASE-T copper Ethernet devices into Gigabit SFP switch ports.

How can procurement and engineering teams request samples or a quotation for LP-SFP-TMRI as an alternative to Generic SFP-GB-GE-T?

Procurement and engineering teams can contact LINK-PP to request LP-SFP-TMRI evaluation samples for electrical, mechanical, and multi-vendor switch compatibility verification. After qualification, our technical sales team can provide competitive pricing, production lead-time estimates, MOQ terms, and volume-order support for replacing Generic SFP-GB-GE-T.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

10/100/1000BASE-T SFP Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify SFP-GB-GE-T compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

10/100/1000BASE-T SFP Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

SFP Download