HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LP-SFP-MSRI-1.webp
  • LP-SFP-MSRI-2.webp
  • LP-SFP-MSRI-3.webp
  • LP-SFP-MSRI-4.webp
  • LP-SFP-MSRI-5.webp

Cisco GLC-TE-I Compatible 1000BASE-T SFP Copper 100m RJ45 Industrial Transceiver Module

P/N:

LP-SFP-MSRI

Manufacturer:

LINK-PP

Classification:

Compatible Brand:

Cisco

Compatible P/N:

GLC-TE-I

  • Compatible Brands: Cisco
  • Form Factor: SFP
  • Data Rate: 1.25G
  • Distance: ≤100m
  • Connector: RJ45
  • P/N: LP-SFP-MSRI
  • Manufacture: LINK-PP
  • Compatible Brand: Cisco
  • Compatible P/N: GLC-TE-I

Product Specifications

LINK-PP Part Number LP-SFP-MSRI Cisco Compatible GLC-TE-I
Part Status Active Form Factor SFP SGMII
Max. Data Rate 1000Mbps Max. Cable Distance 100m
Media Cat 6/Cat 6a Connector RJ-45
Rx LOS NO DOM Not Supported
Commercial Temperature Range -40 to 85°C Protocols MSA Compliant, IEEE STD 802.3 and 802.3ab
EMC (Electro Magnetic Compatibility) Supported Warranty 5 Years

LINK-PP LP-SFP-MSRI Technical & Compatibility Overview

The LINK-PP LP-SFP-MSRI is an industrial-grade hot-pluggable 1000BASE-T Copper Small Form-factor Pluggable (SFP) transceiver module engineered for ruggedized Gigabit Ethernet copper links. Designed as a functional and EEPROM-compatible alternative to the Cisco GLC-TE-I, it converts SFP slot interfaces to a standard RJ-45 female receptacle, supporting 1000 Mbps data rates up to 100 meters (328 feet) over Category 6 or Cat 6a unshielded twisted-pair (UTP) cabling across an extended industrial temperature range of -40°C to +85°C. Built in accordance with IEEE 802.3ab and SFP Multi-Source Agreement (MSA) standards, it provides reliable copper networking for Cisco Industrial Ethernet (IE) switches and harsh outdoor deployments.

  • Industrial Operating Temperature (-40°C to +85°C): Fully rated for harsh industrial environments, unconditioned roadside cabinets, and outdoor power substation switches.
  • Cisco Switch & Router Compatibility: Pre-programmed EEPROM identification ensures recognition and port initialization across Cisco Industrial Ethernet (IE), Catalyst, and Nexus platforms.
  • 1000BASE-T Gigabit Copper Reach (100m): Supports 1 Gbps Gigabit Ethernet data transmission over structured Cat 6/6a UTP copper cabling up to 100 meters.
  • Standard RJ-45 Interface: Integrates a female RJ-45 connector with built-in metallic shielding and EMC protection for direct attachment to twisted-pair patch cables.

Key Design Benefits

  • Industrial Thermal Reliability: Operates reliably across -40°C to +85°C, making it suitable for outdoor Cisco Industrial Ethernet (IE) switches, traffic control boxes, and substation automation.
  • Cisco Switch Interoperability: Pre-coded with Cisco compatible EEPROM identification to avoid unsupported transceiver warnings in Cisco IOS and NX-OS platforms.
  • Copper Cable Plant Utilization: Connects SFP optical switch slots directly to existing RJ-45 Cat 6/6a copper patch panels without requiring external media converters.
  • Hot-Pluggable SFP Form Factor: Enables module insertion and replacement in active switch or router ports without interrupting host chassis power.
  • Second-Source Supply Continuity: Offers network engineering and procurement teams a qualified industrial-grade alternative to mitigate component lead times and single-source risks.

Electrical Architecture & Signal Processing

The LP-SFP-MSRI incorporates a Gigabit Ethernet copper PHY transceiver chip within the metallic SFP module body.

SGMII PHY SERDES Conversion

The internal PHY converts host-side SGMII/SERDES electrical signals into 1000BASE-T pulse-amplitude modulation (PAM-5) signals required for four-pair Category 6/6a copper transmission per IEEE 802.3ab specifications.

Digital Diagnostics Monitoring (DDM/DOM) Note

In alignment with standard 1000BASE-T copper SFP module specifications (including Cisco GLC-TE-I), DDM/DOM monitoring and Rx Loss of Signal (Rx LOS) are not supported, as copper PHY architectures do not utilize optical lasers or photodiodes.

Mechanical & Environmental Specifications

The LP-SFP-MSRI features an industry-standard metallic SFP body with a spring-latching bail mechanism for secure port locking and removal. The front interface consists of a shielded RJ-45 female jack compatible with Cat 6 and Cat 6a UTP cables. The module operates within an extended industrial case temperature range of -40°C to +85°C and carries a 5-year warranty.

Target Applications

  • Cisco Industrial Ethernet (IE) Switches: Ruggedized (-40°C to +85°C) 1 Gbps copper uplinks for Cisco IE3000 / IE4000 / IE5000 industrial switch ports.
  • Intelligent Transportation Systems (ITS): Outdoor roadside cabinet connectivity between industrial switches and traffic monitoring hardware over 100m Cat 6 copper cabling.
  • Power Substation & Utility Backhaul: High-reliability copper Ethernet interconnects for power grid automation controllers and outdoor security enclosures.

Cisco GLC-TE-I Replacement Compatibility Checklist

When evaluating the LINK-PP LP-SFP-MSRI as an alternative to Cisco GLC-TE-I, network engineers should verify the following parameters against their system specification:

  • Thermal Class Verification: Confirm that your deployment environment requires the extended industrial (-40°C to +85°C) operating temperature rating.
  • Cabling Media & Distance Verification: Confirm Category 6 or Cat 6a unshielded twisted-pair (UTP) cable infrastructure up to 100 meters (328 ft).
  • Cisco Switch EEPROM Compatibility: Confirm that target Cisco switch or router line cards support standard 1000BASE-T copper SFP modules.
  • Port Speed & Operating Mode: Confirm that the target SFP port is rated for 1000BASE-T Gigabit Ethernet operation.

Frequently Asked Questions

Is LINK-PP LP-SFP-MSRI compatible with Cisco switches as an alternative to GLC-TE-I?

Yes. The LP-SFP-MSRI is engineered with SFP SGMII MSA compliance, 1000BASE-T copper PHY specs, 100m reach over Cat6/6a, -40°C to +85°C industrial temperature rating, and pre-coded EEPROM settings to serve as a functional drop-in alternative for Cisco GLC-TE-I in Cisco Industrial Ethernet and Catalyst switch SFP slots.

What is the advantage of the industrial -40°C to +85°C temperature rating on the LP-SFP-MSRI?

The extended -40°C to +85°C industrial operating temperature rating ensures reliable PHY operation and signal integrity in unconditioned outdoor cabinets, industrial substation switches, and traffic control enclosures where commercial (0-70°C) transceivers may overheat or fail.

Does the LINK-PP LP-SFP-MSRI support Digital Diagnostics Monitoring (DOM/DDM)?

No. Standard 1000BASE-T copper SFP modules (including Cisco GLC-TE-I and LP-SFP-MSRI) do not support DDM/DOM functions, as copper transceivers do not contain optical lasers or photodiode receivers to measure optical power.

How can procurement and engineering teams request samples or a quotation for LP-SFP-MSRI as an alternative to Cisco GLC-TE-I?

Procurement and engineering teams can contact LINK-PP to request LP-SFP-MSRI evaluation samples for electrical, mechanical, and Cisco switch compatibility verification. After qualification, our technical sales team can provide competitive pricing, production lead-time estimates, MOQ terms, and volume-order support for replacing Cisco GLC-TE-I.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

1.25G SFP Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify GLC-TE-I compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

1.25G SFP Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

SFP Download