LS-SM551G-80C 1.25G SFP 1550nm 80km DOM Duplex LC/UPC SMF Optical Transceiver Module
P/N:
LS-SM551G-80C
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LS-SM551G-80C
- Compatible Brands: LINK-PP
- Form Factor: SFP
- Data Rate: 1.25G
- Distance: ≤80km
- Type: Single Mode
- Connector: Duplex LC
- Wavelength: 1550nm
- P/N: LS-SM551G-80C
- Manufacture: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LS-SM551G-80C
Product Specifications
| LINK-PP Part Number | LS-SM551G-80C | Vendor Name | LINK-PP |
| Form Factor | SFP | Max Data Rate | 1.25Gbps |
| Wavelength | 1550nm | Max Cable Distance | 80km |
| Connector | Duplex LC | Optical Components | DFP 1550nm |
| Media | SMF | DOM Support | Yes |
| TX Power | 0 to +5dBm | RX Power | -26 to -1dBm |
| Receiver Sensitivity | -26dBm | Receiver Overload | -1dBm |
| Operating case temperature | 0 to 70°C | Protocols | SFF-8472 MSA Compliant, IEEE 802.3ah-2004 |
LINK-PP LS-SM551G-80C 1.25G 1000BASE-ZX SFP 1550nm 80km SMF Transceiver Technical Overview
The LINK-PP LS-SM551G-80C is a long-haul 1000BASE-ZX SFP optical transceiver module delivering 1.25 Gbps Gigabit Ethernet data transmission over 80 km on standard 9/125µm Single-Mode Fiber (SMF, G.652) via Duplex LC connectors. Powered by a high-stability 1550nm DFB laser transmitter (0 to +5 dBm TX power), a high-sensitivity PIN photodiode receiver (-26 dBm sensitivity), and an SFF-8472 compliant Digital Optical Monitoring (DOM) interface, it provides a 26 dB optical power budget for regional telecom fiber backbones, WDM metro networks, and long-distance inter-building links.
- 80km Long-Haul 26 dB Optical Budget: Combines a 1550nm DFB laser transmitter and PIN receiver to establish a 26 dB optical link budget (0 dBm min TX to -26 dBm RX sensitivity) across 80 km G.652 SMF spans.
- Low-Attenuation 1550nm Optical Window: Operates at the 1550nm fiber attenuation minimum (~0.2 dB/km), overcoming chromatic dispersion and transmission loss over long-distance regional backhaul routes.
- Real-Time Digital Optical Monitoring (DOM): SFF-8472 compliant 2-wire I2C telemetry interface tracking optical TX power, optical RX power, laser bias current, supply voltage, and internal transceiver temperature.
- SFP MSA & Multi-Vendor Compatibility: Fully compliant with IEEE 802.3ah-2004 1000BASE-ZX and SFF-8472 MSA specifications, pre-coded for Cisco (GLC-ZX-SM equivalent), Mikrotik, Ubiquiti, Huawei, and generic SFP switch ports.
LINK-PP LS-SM551G-80C 1000BASE-ZX SFP Optical Transceiver Overview
LINK-PP LS-SM551G-80C is a hot-pluggable 1.25Gbps SFP optical transceiver module engineered for long-haul single-mode fiber links up to 80 kilometers. Featuring a 1550nm DFB laser, a PIN photodiode receiver, Duplex LC optical interfaces, and full Digital Optical Monitoring (DOM) capabilities, this module delivers stable optical eye diagrams and ultra-low bit error rates (BER < 10^-12). Pre-programmed for seamless interoperability across industry-standard networking hardware, it serves as a fully qualified, cost-effective replacement for Cisco GLC-ZX-SM and generic 1000BASE-ZX OEM transceivers.
Key Benefits of LINK-PP LS-SM551G-80C 1000BASE-ZX SFP Optical Transceiver
- 80km Long-Distance Link Reach via 1550nm Window: Utilizes the 1550nm optical transmission window to minimize fiber attenuation loss (~0.2 dB/km), enabling unamplified point-to-point Gigabit Ethernet links up to 80 km.
- Robust 26 dB Optical Power Budget: High transmitter output power (0 to +5 dBm) paired with a high-sensitivity PIN receiver (-26 dBm) provides ample optical power margin for fiber splices, patch panels, and aging fiber plants.
- Real-Time Diagnostic Telemetry via SFF-8472 DOM: Features an integrated MCU control unit providing real-time telemetry tracking of TX power, RX power, bias current, temperature, and VCC voltage directly via switch CLI software.
- Hot-Pluggable SFP MSA Compliant Form Factor: Easily inserted or removed from active SFP switch slots without interrupting host equipment power or adjacent optical links.
- Compliant with IEEE 802.3ah-2004 1000BASE-ZX Standards: Adheres strictly to Gigabit Ethernet physical layer specifications, ensuring full interoperability with standard 1.25G SFP media converters, routers, and switches.
- Seamless Multi-Vendor Interoperability: Pre-programmed with standard SFP MSA EEPROM data maps, guaranteeing error-free recognition in Cisco, Mikrotik, Ubiquiti, Huawei, and generic SFP switches.
1000BASE-ZX Optical Link Budget & 1550nm DFB Architecture
The LINK-PP LS-SM551G-80C is built on a high-reliability 1000BASE-ZX long-haul electro-optic engine adhering to SFF-8472 diagnostic and SFP MSA mechanical specifications. Designed for 1.25 Gbps serial optical communications, it maintains clean optical eye diagrams and high signal-to-noise ratios (SNR).
1550nm DFB Laser & -26 dBm PIN Receiver Sensitivity
The optical transmitter incorporates a precision 1550nm Distributed Feedback (DFB) laser diode operating with an average TX power between 0 dBm and +5 dBm. On the receive side, a high-sensitivity PIN photodiode combined with a Trans-Impedance Preamplifier (TIA) provides an optical sensitivity of -26 dBm and a receiver overload threshold of -1.0 dBm. This establishes a 26 dB optical power budget, allowing 80 km SMF transmission with a 10 dB safety margin for connector losses and fiber attenuation.
SFF-8472 Digital Optical Monitoring (DOM) Diagnostics
Utilizing an I2C 2-wire serial interface mapped to memory address A2h per SFF-8472, the module provides real-time DOM telemetry. Network operations teams can query live transceiver operating parameters—including optical input/output power in dBm or mW—allowing proactive long-haul link budget tracking and rapid optical fault isolation.
Switch Interoperability & Long-Haul Network Deployment
Long-haul optical links require precise level planning during installation to prevent optical receiver saturation.
Optical Attenuation Engineering & SFP MSA EEPROM Compliance
When testing or deploying the LS-SM551G-80C over short fiber runs (<20 km), an optical attenuator (5 dB to 10 dB) must be inserted at the receiver port to prevent RX optical overload above the -1.0 dBm threshold. Pre-programmed with accurate vendor EEPROM data maps, the module passes host optical verification in Cisco (GLC-ZX-SM), Mikrotik, and Ubiquiti switches without throwing vendor-lock alarms.
Target Applications: Regional Long-Haul Backbones, WDM Metro, and Campus Links
Combining 1.25Gbps speed, 1550nm DFB optics, 26 dB power budget, SFF-8472 DOM telemetry, and SFP MSA compliance, the LINK-PP LS-SM551G-80C supports critical optical infrastructure:
- Regional Telecom Long-Haul Fiber Backbones: Ideal for unamplified 80 km point-to-point Gigabit Ethernet links between regional central offices and cell sites.
- Metro WDM Optical Transport Networks: Deployed in CWDM/DWDM metro aggregation networks for 1550nm wavelength transport.
- Inter-Campus Long-Distance Gigabit Fiber Interconnects: Suitable for connecting university campuses, municipal government facilities, and utility substations across long single-mode fiber spans.
How to Select and Verify LINK-PP LS-SM551G-80C SFP Module
Network architects and optics procurement managers evaluating the LINK-PP LS-SM551G-80C should verify the following core parameters:
- Optical Cable Matching (SMF 9/125µm vs MMF): Confirm that your installed optical fiber infrastructure uses 9/125µm Single-Mode Fiber (SMF, G.652) with Duplex LC connectors, as 1550nm 80km optics are incompatible with multi-mode fiber (MMF).
- Optical Power Budget & Attenuation Calculation: Calculate total fiber link loss (80 km * ~0.2 dB/km = 16 dB + patch panel loss) to ensure total optical attenuation remains within the 26 dB power budget.
- Optical Attenuator Usage for Short Testing: Ensure an in-line optical attenuator is used during short bench testing to keep received optical power below the -1.0 dBm overload threshold and prevent PIN receiver damage.
- DOM Telemetry & Switch Verification: Verify transceiver status via switch CLI commands such as `show interfaces transceiver` to inspect live optical launch and receive power levels.
Frequently Asked Questions
What is LINK-PP LS-SM551G-80C?
LINK-PP LS-SM551G-80C is a 1.25Gbps 1000BASE-ZX SFP optical transceiver module operating at 1550nm over single-mode fiber (SMF) up to 80 km with Duplex LC connectors, DOM support, and a 26 dB optical power budget.
What cable type and maximum distance are supported by LS-SM551G-80C?
The module operates at 1550nm over standard 9/125µm Single-Mode Fiber (SMF, G.652) using Duplex LC connectors, supporting maximum link distances up to 80 kilometers (49.7 miles).
What optical components are used in LS-SM551G-80C?
LINK-PP LS-SM551G-80C incorporates a high-stability 1550nm DFB (Distributed Feedback) laser transmitter and a PIN photodiode receiver with integrated TIA preamplifier achieving -26 dBm sensitivity.
Do I need an optical attenuator when testing LS-SM551G-80C over short distances?
Yes. Because the transmitter output power is high (0 to +5 dBm) and the receiver sensitivity is -26 dBm, an optical attenuator (5 dB to 10 dB) must be used on short fiber runs (<20 km) to prevent receiver overload above -1.0 dBm.
Does LS-SM551G-80C support Digital Optical Monitoring (DOM)?
Yes. The module features full DOM / DDM diagnostic support per SFF-8472, providing real-time telemetry monitoring for TX power, RX power, bias current, supply voltage, and internal temperature via switch software.
Is LS-SM551G-80C compatible with Cisco GLC-ZX-SM transceivers?
Yes. LINK-PP LS-SM551G-80C is fully SFP MSA compliant and pre-coded for plug-and-play interoperability as an equivalent replacement for Cisco GLC-ZX-SM transceivers.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
1.25G SFP Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify LS-SM551G-80C compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
1.25G SFP Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
SFP Download
Product Drawing
LINK-PP Compatible 1.25G LS-SM551G-80C FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































