HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LS-SM311G-10I-1.webp
  • LS-SM311G-10I-2.webp
  • LS-SM311G-10I-3.webp
  • LS-SM311G-10I-4.webp
  • LS-SM311G-10I-5.webp

LS-SM311G-10I SFP 1000BASE-LX/LH 1310nm 10km DOM Duplex LC/UPC SMF Optical Transceiver Module(Industrial)

P/N:

LS-SM311G-10I

Manufacturer:

LINK-PP

Classification:

Compatible Brand:

LINK-PP

Compatible P/N:

LS-SM311G-10I

  • Compatible Brands: LINK-PP
  • Form Factor: SFP
  • Data Rate: 1G
  • Distance: ≤10km
  • Type: Single Mode
  • Connector: Duplex LC
  • Wavelength: 1310nm
  • P/N: LS-SM311G-10I
  • Manufacture: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LS-SM311G-10I

Product Specifications

LINK-PP Part Number LS-SM311G-10I Vendor Name LINK-PP
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1310nm Max Cable Distance 10km
Connector Duplex LC Optical Components FP 1310nm
Media SMF DOM Support Yes
TX Power -9 to 0dBm RX Power -23 to -1dBm
Receiver Sensitivity -23dBm Receiver Overload -1dBm
Industrial temperature Range -40 to 85°C Protocols IEEE 802.3ah-2004, IEEE 802.3z, SFF-8472, SFP MSA (INF-8074i) Compliant

LINK-PP LS-SM311G-10I 1000BASE-LX/LH SFP Optical Transceiver 1310nm 10km Duplex LC DOM (-40°C to +85°C Industrial) for Hardened Ethernet Networks

The LINK-PP LS-SM311G-10I is a carrier-grade, industrial-temperature 1000BASE-LX/LH Small Form-factor Pluggable (SFP) optical transceiver engineered for hardened Industrial Ethernet switches, substation automation, Intelligent Transportation Systems (ITS), and outdoor SCADA networks. Designed to operate flawlessly across an extreme operating temperature range of -40°C to +85°C (-40°F to 185°F), this hot-pluggable module delivers dependable 1.25Gbps Gigabit Ethernet throughput over Single-Mode Fiber (SMF) up to 10 kilometers.

Architected with a precision 1310nm Fabry-Perot (FP) laser transmitter and a high-sensitivity PIN photodiode receiver integrated with a trans-impedance preamplifier (TIA), the module provides a robust 14dB optical power budget (sensitivity <-23dBm). Fully compliant with IEEE 802.3z 1000BASE-LX, SFF-8472, and SFP MSA (INF-8074i) standards, it features Digital Optical Monitoring (DOM/DDM) telemetry. It offers industrial automation architects an uncompromised, vibration-resistant optical engine for unstaffed outdoor cabinets and harsh physical environments.

Application Topologies and Deployment Scenarios

Industrial networking environments demand optical modules that resist severe thermal cycling, electromagnetic interference (EMI), and physical vibration without signal degradation.

Outdoor Cabinets & Roadside ITS Enclosures

In Intelligent Transportation Systems (ITS), traffic monitoring networks, and municipal security systems, network hardware is deployed inside roadside cabinets exposed to direct sunlight and freezing winter temperatures. The LS-SM311G-10I provides hardened 1G fiber uplinks between pole-mounted CCTV cameras, traffic controllers, and central traffic management centers without requiring cabinet heating or active cooling.

Substation Automation & SCADA Networks (IEC 61850 Environments)

In power utility substations and industrial SCADA topologies, high high-voltage switching creates intense electromagnetic noise that corrupts copper UTP cabling. This industrial SFP module provides 100% dielectric isolation over 10km single-mode fiber runs, connecting hardened Ethernet switches (e.g., Siemens SCALANCE, Cisco IE3000/IE4000, Moxa EDS series) in compliance with substation noise immunity standards.

Campus Backbone & Long-Reach Enterprise Uplinks

For industrial parks, oil & gas refineries, and mining facilities spanning large physical areas, this 1000BASE-LX/LH transceiver serves as the primary long-reach fiber bridge, connecting remote building distribution nodes back to central server rooms across 10km OS2 SMF paths.

Physical Layer Design and Optoelectronic Architecture

Operating reliably at extreme temperatures requires stringent component selection and precision thermal dissipation design.

1310nm FP Laser & High-Sensitivity PIN Receiver Architecture

The optical transmitter core utilizes a thermally stabilized 1310nm FP (Fabry-Perot) laser launching optical power between -9dBm and 0dBm. The receiving path combines a high-responsivity PIN photodiode array with a TIA preamplifier, achieving a receiver sensitivity of -23dBm and a wide dynamic range up to -1dBm overload threshold. This provides substantial margin against fiber attenuation and splice loss across 10km OS2 SMF runs.

Thermally Hardened Metal Enclosure (-40°C to +85°C)

Commercial transceivers (0°C to 70°C) experience severe laser wavelength drift and receiver gain loss when exposed to sub-zero or high-heat environments. The LS-SM311G-10I is built inside an all-metal, EMI-shielded zinc die-cast housing utilizing industrial-grade laser diodes and an integrated MCU control unit that dynamically compensates for temperature-induced bias current shifts.

Optical Link Budget and 10km OS2 Margin

With an active Tx power range of -9 to 0dBm and a guaranteed Rx sensitivity of -23dBm, the module provides a 14dB minimum optical link budget. Assuming standard OS2 SMF attenuation of 0.35dB/km at 1310nm, the transceiver easily overcomes the ~3.5dB fiber loss over 10km, leaving over 10dB of headroom for patch panel connectors, fusion splices, and environmental aging penalties.

Multi-Vendor Compatibility and SFF-8472 DOM Telemetry

Industrial networks frequently mix hardware from specialized automation vendors. The LS-SM311G-10I adheres strictly to open SFP Multi-Source Agreements for universal interoperability.

SFP MSA & Multi-Vendor Hardened Switch Interoperability

Fully compliant with INF-8074i and SFF-8472 SFP Multi-Source Agreements, this transceiver undergoes rigorous EEPROM coding and hardware validation. It offers seamless plug-and-play operation across leading industrial switch brands including Cisco IE Series, Siemens SCALANCE, Moxa, Hirschmann, Advantech, and Allied Telesis without triggering vendor lock-out alarms.

SFF-8472 Digital Diagnostic Monitoring (DOM/DDM)

Integrated DDM telemetry accessible via the I2C interface provides real-time visibility into internal operational parameters. Through the switch CLI or SNMP management systems, network engineers can monitor five core parameters in real-time:

  • Transceiver Internal Temperature (°C)
  • Vcc Supply Voltage (V)
  • Laser Bias Current (mA)
  • Transmitted Optical Power (Tx dBm)
  • Received Optical Power (Rx dBm)

Remote Monitoring & Predictive Field Maintenance

In unstaffed, remote industrial sites, dispatching field technicians for troubleshooting is expensive. Real-time Rx power monitoring allows NOC teams to detect gradual optical power drops (caused by dirty fiber end-faces or micro-bends) before a complete link outage occurs, enabling scheduled preventive maintenance.

Selection Guide and Industrial Deployment Considerations

Proper optic selection and fiber hygiene are essential for maintaining reliable Gigabit links in field environments.

Industrial (-40°C to +85°C) vs. Commercial (0°C to +70°C) Temperature Selection

  • Industrial Temperature (LS-SM311G-10I): Mandatory for outdoor enclosures, pole-mounted boxes, transportation systems, and unheated/unconditioned field cabinets. Prevents thermal shutdown and premature laser diode degradation.
  • Commercial Temperature: Suitable only for climate-controlled indoor data centers and enterprise office equipment.

Single-Mode (OS2) vs. Multimode (OM3/OM4) Guidelines

  • 1000BASE-LX/LH (This Module): Designed primarily for OS2 9/125µm Single-Mode Fiber up to 10km. (Note: Can also run over legacy Multimode Fiber up to 550m when used with a Mode-Conditioning Patch Cable).
  • 1000BASE-SX: Restricted to short-reach Multimode Fiber (MMF) up to 550m over 850nm VCSEL optics.

Optical Cleaning & Field Protection in Outdoor Enclosures

Microscopic dust contamination on the Duplex LC ferrule is the #1 cause of optical power loss in field deployments. Always clean the LC connectors with an optical cleaning pen before insertion, and keep the protective vinyl dust cap installed on the SFP port whenever fiber jumpers are disconnected.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

1G SFP Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify LS-SM311G-10I compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

1G SFP Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

SFP Download