Generic SFP1G-SX-85 Compatible 1G SFP 850nm 550m Optical Transceiver
P/N:
LS-MM851G-S5C
Manufacturer:
LINK-PP
Compatible Brand:
Generic
Compatible P/N:
SFP1G-SX-85
- Compatible Brands: Generic
- Form Factor: SFP
- Data Rate: 1G
- Distance: ≤550m
- Type: Multimode
- Connector: Duplex LC
- Wavelength: 850nm
- P/N: LS-MM851G-S5C
- Manufacture: LINK-PP
- Compatible Brand: Generic
- Compatible P/N: SFP1G-SX-85
Product Specifications
| Generic Part Number | SFP1G-SX-85 | Vendor Name | LINK-PP |
| Form Factor | SFP | Max Data Rate | 1.25Gbps |
| Wavelength | 850nm | Max Cable Distance | 550m over OM2 MMF |
| Connector | Duplex LC | Media | MMF |
| Transmitter Type | VCSEL | Receiver Type | PIN |
| TX Power | -9 to 0dBm | RX Power | -20 to -1dBm |
| Receiver Sensitivity | -18dBm | DOM Support | Yes |
| Operating Temperature Range | 0 to 70°C | Protocols | IEEE 802.3z, SFF-8472, FC-PI, SFP MSA (INF-8074i) Compliant |
1.25Gbps SFP 850nm 550m MMF Optical Transceiver
The LINK-PP SFP1G-SX-85 is an industry-standard 1.25Gbps short-reach SFP optical transceiver module engineered for multimode fiber (MMF) data transmission at a nominal center wavelength of 850 nm. Utilizing an internal 850 nm VCSEL laser transmitter, a PIN photodiode receiver with integrated trans-impedance preamplifier (TIA), and a micro-controller unit (MCU), the module delivers Gigabit optical transmission and digital optical monitoring (DOM) across the commercial 0 to 70°C operating temperature range.
The transceiver conforms to the SFP Multi-Source Agreement (INF-8074i), SFF-8472 diagnostic monitoring specifications, IEEE 802.3z 1000BASE-SX, and Fibre Channel FC-PI standards. Featuring a standard duplex LC optical interface and supporting link distances up to 550 meters over OM2 multimode fiber, the SFP1G-SX-85 provides a pluggable interconnect solution suited for enterprise LAN switches, core routers, storage area network (SAN) directors, and network security firewalls.
Design Positioning and Qualification
The LINK-PP SFP1G-SX-85 is designed as an industry-standard 1.25Gbps 1000BASE-SX SFP optical transceiver module for networking platforms requiring short-reach multimode fiber connectivity. It can be evaluated for new hardware designs, BOM consolidation, or as an alternative sourcing option for standard MSA-compliant 850nm 550m SFP optical sockets. LINK-PP transceivers can be pre-coded and tested for host platform recognition across major enterprise switching and routing systems. Engineering teams should verify host port compatibility, EEPROM coding requirements, and optical power budget margins against official documentation before approving production release.
Procurement and OEM Qualification
For sourcing teams and OEM engineering programs evaluating the SFP1G-SX-85 as a second-source or BOM alternative, key qualification parameters include host port interoperability, EEPROM coding compatibility, optical link budget margins, DOM telemetry calibration, operating temperature rating, and expected volume demand. LINK-PP can support sample evaluation, mechanical drawing review, and documentation requirements for prototype validation, AVL qualification, and volume production planning.
Short-Reach 850nm Multimode Fiber Transmission Architecture
Implementing 850 nm multimode optical transceivers delivers practical infrastructure and deployment characteristics for campus and enterprise networks:
- 550m Transmission on OM2 Multimode Fiber: Designed to support link distances up to 550 meters over standard 50/125 µm OM2 multimode fiber (and up to 220 meters over 62.5/125 µm OM1 fiber), covering typical intra-building backbones and campus distribution runs.
- 850 nm VCSEL Optical Source: The 850 nm Vertical-Cavity Surface-Emitting Laser delivers stable optical output with low power consumption and high coupling efficiency into multimode fiber cores.
- Standard SFP Hot-Pluggable Form Factor: Conforms to SFP MSA (INF-8074i) physical dimensions, enabling hot insertion and extraction into high-density line cards and switches without interrupting host chassis power.
- 0 to 70°C Commercial Operating Range: The 0 to 70°C specification defines the stated operating temperature range of the transceiver assembly, supporting standard enterprise wiring closets and climate-controlled data center environments.
- Duplex LC/UPC Optical Interface: Standard duplex LC optical connectors provide secure physical latching and broad compatibility with structured optical distribution panels.
Electro-Optical Architecture, Digital Optical Monitoring (DOM), and Protocols
The SFP1G-SX-85 integrates an 850 nm VCSEL laser transmitter delivering optical output power between -9 dBm and 0 dBm. The optical receiver stage utilizes a high-speed PIN photodiode with a sensitivity rated at -18 dBm, supporting an optical receive power range from -20 dBm to -1 dBm with an optical overload threshold of -1 dBm.
Real-time operating parameters are accessed through a 2-wire I2C serial interface compliant with SFF-8472 Digital Optical Monitoring (DOM). System administrators can monitor transceiver operating temperature, supply voltage, laser bias current, transmitted optical power (TX power), and received optical power (RX power). The module conforms to IEEE 802.3z 1000BASE-SX, Fibre Channel FC-PI (1.0625 Gbps), and SFP MSA specifications, complying with Class 1 laser safety standards under IEC 60825-1.
Host Board and Mechanical Integration Considerations
When integrating the SFP1G-SX-85 into host line cards and optical systems, hardware and network engineers should account for the following structural and electrical parameters:
1. SFP Cage Clearance and High-Speed Electrical Routing
The transceiver housing adheres to SFP MSA mechanical cage specifications. The host PCB high-speed differential traces (TX+/- and RX+/-) must be routed as 100 Ω differential impedance lines with matched electrical lengths and AC-coupling capacitors to maintain signal integrity at 1.25 Gbps.
2. I2C Two-Wire Bus and DOM Telemetry Management
Host controller boards require standard pull-up resistors (typically 4.7 kΩ to 10 kΩ) on the MOD-DEF (SDA/SCL) lines to ensure stable I2C bus communication for DOM polling and module identification EEPROM access.
3. Optical Cleaning and Duplex LC Multimode Handling
Connector cleanliness is essential for optical link reliability. Both fiber ends of the duplex LC/UPC connector must be inspected and cleaned with an optical scope prior to insertion to prevent dust and oil contamination from causing optical attenuation.
4. Receiver Overload and Short-Reach Testing Precautions
The receiver overload limit is rated at -1 dBm. When performing short-distance bench testing with high-output transmitters, engineers should verify that received optical power does not exceed -1 dBm to prevent photodiode saturation.
Design Consideration Comparison: 1000BASE-SX SFP vs. Alternative Optical Interconnects
| Design Consideration | SFP1G-SX-85 1.25G 850nm SX SFP |
1.25G 1310nm LX SFP (Single Mode) |
1000BASE-T RJ45 Copper SFP Transceiver |
|---|---|---|---|
| Transmission Media | Multimode Fiber (OM1 / OM2 / OM3) | Single Mode Fiber (G.652 SMF) | Category 5e / 6 UTP Copper |
| Nominal Operating Wavelength | 850 nm | 1310 nm | Electrical Baseband |
| Maximum Transmission Reach | 550m over OM2 MMF | 10 km to 20 km on SMF | 100m over Cat5e/Cat6 |
| Connector Interface | Duplex LC | Duplex LC | RJ45 8P8C Modular Jack |
| Power Consumption Profile | Low optical power consumption | Moderate optical power consumption | Higher thermal dissipation (~1.0W – 1.2W) |
| Primary Engineering Focus | Short-reach campus backbone & intra-building links | Long-span building-to-building & metro links | Legacy copper switch-to-device connections |
Application Considerations for SFP1G-SX-85
| Target Application Profile | Primary Engineering Consideration |
|---|---|
| Enterprise Campus & LAN Backbone Networks | Supports Gigabit Ethernet transmission across structured multimode fiber backbones up to 550 meters. |
| Data Center Switch-to-Switch Interconnects | Connects access and aggregation switches within data halls with low latency and low power consumption. |
| Storage Area Networks (SAN) & Fibre Channel | Complies with FC-PI specifications for 1.0625 Gbps storage fabrics and tape library interconnects. |
| Network Firewalls & Security Edge Routers | Provides fiber-optic isolation and noise immunity for perimeter network appliances in enterprise environments. |
Engineering Verification Checklist
Before releasing an optical design or issuing volume procurement orders for the SFP1G-SX-85, engineering teams should confirm the following technical parameters:
- Optical Power Budget Calculation: Verify total link insertion loss across multimode fiber, patch panels, and adapters remains within the available 9 dB optical dynamic range (-9 dBm min TX to -18 dBm sensitivity).
- Multimode Fiber Core Matching: Confirm whether the installed plant utilizes 50/125 µm (OM2/OM3/OM4) or 62.5/125 µm (OM1) fiber to verify link distance limits (550m vs 220m).
- Host Compatibility and EEPROM Coding: Confirm host switch platform compatibility and verify that transceiver EEPROM programming aligns with target platform vendor requirements.
- Fiber End-Face Inspection: Clean and inspect all duplex LC/UPC multimode connectors with an optical scope to prevent connector insertion losses.
- SFP Cage Clearance: Verify that host enclosure front panels provide sufficient clearance for the optical module latch mechanism during maintenance.
- Thermal Operating Environment: Ensure that chassis cage airflow keeps the transceiver case temperature within the specified 0 to 70°C operating window.
Frequently Asked Questions
What are the primary specifications of the LINK-PP SFP1G-SX-85?
The SFP1G-SX-85 is a 1.25Gbps short-reach SFP optical transceiver module. It features an 850 nm VCSEL laser transmitter, PIN photodiode receiver, duplex LC connector, support for multimode fiber (MMF) up to 550m over OM2, SFF-8472 DOM monitoring, transmit power of -9 to 0 dBm, receive power of -20 to -1 dBm, receiver sensitivity of -18 dBm, and an operating temperature range of 0 to 70°C.
What transmission distances are supported across different multimode fiber types?
The SFP1G-SX-85 supports transmission distances up to 550 meters over standard 50/125 µm OM2 multimode fiber. When deployed on 50/125 µm laser-optimized OM3/OM4 fiber, it can also support 550m reach, while on legacy 62.5/125 µm OM1 fiber, maximum transmission reach is typically 220 meters.
Can the SFP1G-SX-85 be evaluated as an alternative sourcing option in existing switches?
Yes. The SFP1G-SX-85 conforms to the standard SFP MSA (INF-8074i) and IEEE 802.3z 1000BASE-SX specifications. It can be evaluated as an alternative sourcing option for standard 1G SX optical ports. Host platform EEPROM coding requirements should be confirmed with LINK-PP prior to volume deployment.
What parameters can be monitored via Digital Optical Monitoring (DOM)?
Digital Optical Monitoring (DOM) per SFF-8472 allows host networking equipment to read real-time operational parameters over the 2-wire I2C interface, including optical transmit power, optical receive power, laser bias current, internal module temperature, and supply voltage.
What type of optical fiber and connector does this transceiver require?
The SFP1G-SX-85 requires multimode fiber (MMF, 50/125 µm or 62.5/125 µm) terminated with standard Duplex LC/UPC connectors. It should not be used with single-mode fiber or angled LC/APC connectors.
Is the SFP1G-SX-85 suitable for single-mode fiber (SMF) links?
No. The SFP1G-SX-85 utilizes an 850 nm VCSEL laser designed exclusively for multimode fiber cores. For single-mode fiber infrastructure, a 1310 nm 1000BASE-LX SFP transceiver (such as the LINK-PP SFP 1G LX series) should be selected.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
1G SFP Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify SFP1G-SX-85 compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
1G SFP Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
SFP Download
Product Drawing
Generic Compatible 1G SFP1G-SX-85 FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































