HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LS-MM851G-S5C-1.webp
  • LS-MM851G-S5C-2.webp
  • LS-MM851G-S5C-3.webp
  • LS-MM851G-S5C-4.webp
  • LS-MM851G-S5C-5.webp

Arista SFP-1G-SX Compatible 1000BASE-SX SFP 850nm 550m Duplex LC MMF DOM Transceiver Module

P/N:

LS-MM851G-S5C

Manufacturer:

LINK-PP

Classification:

Compatible Brand:

Arista

Compatible P/N:

SFP-1G-SX

  • Compatible Brands: Arista
  • Form Factor: SFP
  • Data Rate: 1G
  • Distance: ≤550m
  • Type: Multimode
  • Connector: Duplex LC
  • Wavelength: 850nm
  • P/N: LS-MM851G-S5C
  • Manufacture: LINK-PP
  • Compatible Brand: Arista
  • Compatible P/N: SFP-1G-SX

Product Specifications

LINK-PP Part Number LS-MM851G-S5C Arista Compatible SFP-1G-SX
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 850nm Max Cable Distance 550m over OM2 MMF
Connector Duplex LC Optical Components VCSEL 850nm
Media MMF DOM Support Yes
TX Power -9 to 0dBm RX Power -20 to -1dBm
Receiver Sensitivity -18dBm Receiver Overload -1dBm
Commercial Temperature Range 0 to 70°C Protocols IEEE 802.3z, SFF-8472, FC-PI, SFP MSA (INF-8074i) Compliant

Data Center Architecture: Why Use 1G in an Arista Fabric?

Out-of-Band (OOB) Management & IPMI: In modern Arista Spine-Leaf deployments (where the core runs at 100G/400G), 1G optics remain absolutely critical for the Management Network. Network architects deploy the LS-MM851G-S5C in switches like the Arista 7010T or 7020R series to aggregate IPMI, iLO, and OOB management connections from server racks, ensuring mission-critical backdoor access during data plane outages.

Before You Deploy: Arista MMF Safety Checklist

To ensure drop-in compatibility and zero-packet-loss performance in Arista environments, verify the following:

  • Fiber Plant Matching: This 850nm VCSEL module strictly requires Multimode Fiber (MMF). Using Single-Mode Fiber (SMF) will cause immediate link failure due to modal dispersion.
  • Lab Testing Safety: With a robust Receiver Overload threshold of -1.0 dBm, you can safely connect two modules back-to-back on a test bench without using optical attenuators.
  • FC-PI SAN Integration: If deploying in a converged storage environment, ensure your SAN fabric is configured for 1G/2G Fibre Channel protocols, which this module natively supports alongside Ethernet.

Comprehensive Technical Specifications

The LINK-PP LS-MM851G-S5C is an industrial-standard 1000BASE-SX SFP Optical Transceiver Module engineered for reliable, short-reach Gigabit Ethernet connectivity. Designed as a functional cross-reference and optical equivalent to the Arista SFP-1G-SX, this hot-pluggable module allows network architects to seamlessly deploy or upgrade 1.25Gbps topologies without replacing legacy Multimode Fiber (MMF) infrastructure. Utilizing a standard Duplex LC/UPC connector interface, it provides a highly reliable physical layer (PHY) transport solution for scaling Top-of-Rack (ToR) switching and enterprise backbone access networks.

Optoelectrically, the transceiver utilizes a highly efficient 850nm VCSEL (Vertical-Cavity Surface-Emitting Laser) transmitter paired with a sensitive PIN photodiode and trans-impedance preamplifier (TIA) receiver. This architecture delivers a controlled TX output power of -9 to 0dBm and a receiver sensitivity of -18dBm, establishing a robust optical power budget. Because 850nm VCSEL technology is specifically engineered to minimize modal dispersion in multimode fiber, the module achieves error-free 1.25Gbps data transmission for distances up to 550 meters over OM2 MMF (and up to 220 meters on older OM1 fiber). All modules are engineered to satisfy strict Class I laser safety requirements.

To ensure maximum operational transparency, the module supports advanced Digital Optical Monitoring (DOM / DDM) in strict compliance with the SFF-8472 protocol. Mediated by an integrated MCU control unit, this feature empowers network administrators to monitor real-time diagnostic telemetry—including optical TX/RX power, laser bias current, and internal temperature—directly from the host chassis, drastically simplifying network fault isolation.

Mechanically and operationally, the LS-MM851G-S5C strictly adheres to the SFP Multi-Source Agreement (INF-8074i), ensuring wide hardware interoperability. Fully compliant with IEEE 802.3z and Fibre Channel (FC-PI) protocols, and operating within a standard commercial temperature range of 0°C to +70°C, this module is the definitive optical solution for diverse networking environments. Typical applications include enterprise core-to-edge switching, campus-scale SAN (Storage Area Networks), and high-density data center access layers.

Optical Power & Link Budget Analysis

Ensure your structured cabling and MMF patch panels do not exceed the baseline 9.0 dB budget capability of this transceiver.

Parameter Specification Limit Diagnostic Note
Transmit Power (Tx) -9.0 dBm to 0.0 dBm Standard output for short-reach VCSEL technology.
Receiver Sensitivity (Rx) -18.0 dBm Values dropping below -18.0 dBm indicate high attenuation or dirty fibers.
Receiver Overload -1.0 dBm Highly resilient to saturation; safe for very short patch cable connections.
Optical Link Budget 9.0 dB (Calculated from minimum Tx of -9.0dBm and Rx sensitivity of -18.0dBm).

Supported Fiber Types & Maximum Distances

Fiber Grade Core Diameter Jacket Color (Standard) Maximum Supported Distance
OM1 62.5/125µm Orange 220 meters
OM2 50/125µm Orange 550 meters
OM3 / OM4 50/125µm Aqua / Magenta 550 meters (Protocol hard-capped by 802.3z)

Engineering Validation: Arista EOS Native Recognition & Diagnostics

Unlike poorly coded generic optics that trigger the errdisable state and force administrators to request cryptographic unlock keys from Arista TAC (using the modern service unsupported-transceiver <License-Key> command), the LINK-PP LS-MM851G-S5C is engineered with a bit-perfect Arista SFP-1G-SX EEPROM signature.

True Plug-and-Play: Insert the module, and the Arista Extensible Operating System (EOS) natively recognizes the vendor OUI and optical parameters without requiring any hidden CLI bypass commands.

Once linked, you can instantly poll the real-time SFF-8472 DOM metrics to ensure optical integrity across your Management or Data networks:

Arista# show interfaces ethernet 1 transceiver
Port       Temp(C)   Voltage(V)  Tx Bias(mA)  Tx Power(dBm)  Rx Power(dBm)
-------    -------   ----------  -----------  -------------  -------------
Et1        34.1      3.29        5.42         -3.1           -9.5

Diagnostic Baseline: In the EOS output above, the Rx Power is -9.5 dBm. Since this module has a Receiver Sensitivity of -18.0 dBm, this leaves a highly stable 8.5 dB operating margin. As long as Rx power remains between -1.0 dBm and -18.0 dBm, the physical layer is perfectly healthy.

Frequently Asked Questions

Why use a 1G SFP-1G-SX in a modern Arista data center?

In Arista Spine-Leaf architectures, 1G optics are crucial for Out-of-Band (OOB) management switches (like the Arista 7010T series) to connect server IPMI/iLO ports, ensuring network administrators have backdoor access during an outage.

Do I need an Arista unlock key to use this module?

No. Because this transceiver is programmed with the exact Arista SFP-1G-SX EEPROM coding, EOS recognizes it natively. You do not need to execute the service unsupported-transceiver command or request a license key from TAC.

Does this module support both Ethernet and Fibre Channel?

Yes. Beyond IEEE 802.3z Gigabit Ethernet, this module complies with FC-PI protocols, making it fully capable of supporting 1G/2G Fibre Channel arrays in converged storage networks.

What type of fiber patch cord is required?

This 850nm VCSEL module strictly requires Multimode Fiber (MMF) with Duplex LC/UPC connectors. OM3 or OM4 laser-optimized fiber is recommended for optimal DOM accuracy and reaching the 550m limit.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

1G SFP Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify SFP-1G-SX compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

1G SFP Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

SFP Download