What Is CAUI ?
CAUI (100 Gigabit Attachment Unit Interface) is a standardized electrical and logical interface defined to support 100 Gbps Ethernet connections between a MAC (Media Access Control) layer device and a PHY (Physical Layer) device. It extends the concepts of the traditional XAUI (10 Gbps Attachment Unit Interface) to 100 Gbps, enabling high-speed data transport over multiple lanes in data center, enterprise, and carrier networks. CAUI is primarily used in high-performance networking equipment such as switches, routers, and network interface cards (NICs).
Technical Background and Evolution
The growing demand for 100 Gbps Ethernet in data centers, cloud infrastructure, and high-performance computing motivated the development of CAUI. Traditional 10 Gbps XAUI interfaces became insufficient for scaling bandwidth without incurring excessive lane count or signal integrity issues. CAUI was introduced to:
- Aggregate multiple lower-speed lanes to achieve 100 Gbps throughput.
- Maintain electrical and logical compatibility with existing MAC/PHY architecture.
- Support long-reach and short-reach PHY implementations.
CAUI evolved from XAUI (IEEE 802.3 Clause 48) and was formally standardized in IEEE 802.3ba (2010), defining 100G Ethernet interfaces. It later influenced high-speed interfaces such as CAUI-4, CAUI-10, and variants for different lane and signaling schemes.
How It Works
CAUI operates as a multi-lane interface where data from the MAC layer is serialized and distributed across multiple high-speed electrical lanes toward the PHY. Key principles:
- Lane Aggregation: CAUI typically uses 10 lanes at 10.3125 Gbps each (CAUI-10) or 4 lanes at 25.78125 Gbps each (CAUI-4) to reach 100 Gbps.
- Encoding: Uses 64b/66b line coding to balance DC content and improve error detection.
- Signal Flow:
- MAC generates 100 Gbps data streams.
- CAUI encoder splits the stream into multiple lanes.
- High-speed serialized signals travel over copper or backplane traces to the PHY.
- PHY reconstructs the aggregate 100 Gbps signal and converts it to the optical or electrical medium.
- Physical Layer Compatibility: Supports both direct backplane connections and optical module attachments.
CAUI allows seamless integration of high-speed PHYs without redesigning the MAC layer, reducing engineering complexity in high-density network equipment.
Key Specifications
- Data Rate: 100 Gbps aggregate
- Lane Count: CAUI-10 (10 × 10.3125 Gbps), CAUI-4 (4 × 25.78125 Gbps)
- Encoding: 64b/66b line coding
- Interface Type: Electrical, differential signaling over copper traces or mezzanine connectors
- Reach: Short-reach backplane (up to 10–15 cm) or extended-reach for specific PHYs
- Voltage Swing: Typically 800–1200 mV differential
- Connector Form Factor: Backplane connectors, QSFP modules
- Standards: IEEE 802.3ba, IEEE 802.3bj (for CAUI-4), IEEE 802.3bm (for later 100G variants)
Typical Use Cases
- Interfacing MAC to PHY in 100G Ethernet switches and routers.
- High-density data center backplanes connecting line cards.
- Cloud and hyperscale infrastructure requiring high-throughput, low-latency interconnects.
- AI clusters and HPC networks for multi-terabit aggregation.
- Optical module interconnection in QSFP28 and CFP form factors.
Related Technologies / Terms
- XAUI (10G Attachment Unit Interface): Predecessor interface for 10 Gbps Ethernet.
- XLAUI (40G Attachment Unit Interface): 40 Gbps MAC-to-PHY interface using 4 lanes.
- QSFP/QSFP28 Modules: Form factors supporting CAUI electrical signaling for optical interfaces.
- 64b/66b Encoding: Line coding method for high-speed Ethernet interfaces.
- IEEE 802.3ba/bj/bm Standards: Define 100G Ethernet physical interfaces and CAUI variants.
Frequently Asked Questions (FAQs)
Q1: What is the difference between CAUI-4 and CAUI-10?
CAUI-10 uses 10 lanes at 10.3125 Gbps each, while CAUI-4 uses 4 lanes at 25.78125 Gbps each. CAUI-4 reduces lane count and simplifies PCB routing but requires higher per-lane signaling speed.
Q2: Can CAUI be used for optical modules?
Yes, CAUI is compatible with electrical interfaces on modules such as QSFP28 or CFP, which convert electrical signals into optical transmission.
Q3: What encoding is used in CAUI?
CAUI uses 64b/66b encoding to reduce overhead while maintaining DC balance and enabling effective error detection.
Q4: Is CAUI backward compatible with XAUI?
CAUI is conceptually similar to XAUI but operates at 100 Gbps and requires more lanes and higher signaling speeds. It does not provide direct electrical backward compatibility with XAUI.
Q5: What are the main design challenges for CAUI?
Key design challenges include maintaining signal integrity at high lane speeds, mitigating PCB crosstalk, ensuring correct differential impedance, and managing thermal performance in dense networking equipment.
Industry Standards Involved
- IEEE 802.3ba: 40G/100G Ethernet standard, defining CAUI-10.
- IEEE 802.3bj: 100G Ethernet electrical interfaces, including CAUI-4.
- IEEE 802.3bm: 100G Ethernet optical and electrical specifications.
- MSA (Multi-Source Agreements): QSFP/QSFP28 electrical compliance.
- ITU-T G.709 / G.959.1: Related for high-speed optical transport.
Summary
CAUI is a foundational MAC-to-PHY interface enabling 100 Gbps Ethernet by aggregating multiple high-speed lanes. Its design balances electrical engineering challenges with the need for scalability, interoperability, and backward compatibility with MAC architectures. CAUI continues to serve as a critical interface in data centers, HPC clusters, and carrier networks, bridging high-speed PHYs with existing digital logic while maintaining standardized performance and reliability.
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications



























