HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open

Product Categories


Samoa LPJG4826-8GFNL Gigabit RJ45 ethernet pcb connector Lan Transformer Green/Green Led Tab Down Single Port

LINK-PP LPJ4049HDNL single-port 10/100BASE-T PoE RJ45 MagJack with rectifier bridge, 6-core magnetics, Tab-Down latch and -40°C to +85°C range.
  • Compatible Brands: LINK-PP
  • Number of Ports: 1X1
  • Speed: 1000Base-T
  • PoE: Non-PoE
  • Latch: Down
  • Mounting Type: THT
  • LED Option: Green / Green
  • Shield EMI Tabs: YES
  • Temperature: 0℃ to 70℃
  • P/N: LPJG4826-8GFNL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LPJG4826-8GFNL

Product Description

Product Specifications

LINK-PP Part Number LPJ4049HDNL Connector Type Jack
Part Status Active Mounting Type Through Hole
Number of Positions/Contacts 10P8C (RJ45, Ethernet) Application-LAN Ethernet (PoE)
Number of Ports 1x1 Port Speed 10/100BASE-T
Latch Down Cores per Port 6
Orientation 90° Angle (Right) PCB Mount Angle Side Entry
Shield EMI Tabs Without LED Option Yellow / Green
PCB FR4 PCB Retaining Post T-Post
Package Height (Inches/mm) 0.524 / 13.30 Package Length (Inches/mm) 0.837 / 21.25
Package Width (Inches/mm) 0.627 / 15.93 Temperature -40°C to +85°C
BST Circuit Yes AutoMDX Yes
Diodes Rectifier Bridge Contact Mating Area Plating Gold 6µ" / 15µ" / 30µ"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T, C

Single-Port 10/100BASE-T PoE RJ45 MagJack with Integrated Rectifier Bridge

The LINK-PP LPJ4049HDNL is a single-port 10/100BASE-T PoE RJ45 MagJack in a right-angle, side-entry through-hole configuration. The Ethernet interface incorporates an internal 6-core magnetic structure with a 1CT:1CT turns ratio and T, C configuration. The connector also includes an integrated rectifier bridge, Bob Smith termination (BST), AutoMDX support, Yellow/Green LEDs, and a specified operating temperature range of -40°C to +85°C.

For hardware engineers, the LPJ4049HDNL combines the RJ45 interface, Ethernet magnetics, rectifier bridge, status LEDs, and mechanical retention features within a single connector assembly. For procurement teams and OEM integrators, the combination provides a consolidated component option for PoE-capable 10/100BASE-T designs where connector footprint, power-path architecture, operating temperature, and component qualification are important selection criteria.

Ethernet Speed: 10/100BASE-T
Power Architecture: PoE with Rectifier Bridge
Magnetics Architecture: 6-Core Integrated Design
Operating Temperature: -40°C to +85°C
Latch Orientation: Tab-Down
LED Configuration: Yellow / Green

Design Positioning and PoE Integration

The LPJ4049HDNL can be evaluated for new PoE Ethernet designs and alternative sourcing programs requiring a single-port 10/100BASE-T RJ45 MagJack with integrated rectification. Its combination of integrated magnetics, rectifier bridge, Tab-Down mechanical orientation, Yellow/Green LEDs, and -40°C to +85°C operating range provides a defined starting point for component selection.

Because PoE implementations depend on the complete power and Ethernet interface architecture, engineering teams should verify the official LPJ4049HDNL schematic, PCB footprint, pin assignment, rectifier topology, electrical ratings, LED connections, and host PHY/PD requirements before approving the component for production.

Procurement and OEM Qualification

For procurement teams and OEM engineering programs evaluating the LPJ4049HDNL for a new design, BOM qualification, or second-source strategy, key selection parameters include the 1x1 mechanical format, Tab-Down orientation, 10/100BASE-T interface, integrated rectifier bridge, 6-core magnetic configuration, 1CT:1CT turns ratio, Yellow/Green LEDs, operating temperature range, and PoE design requirements.

Before AVL approval or volume production, engineering and sourcing teams should cross-check the mechanical drawing, PCB footprint, pinout, rectifier configuration, electrical characteristics, and system-level PoE requirements. Procurement teams should also confirm sample availability, lead time, packaging requirements, contact plating selection, documentation requirements, and expected production volume.

Integrated Rectifier Bridge for PoE Designs

The LPJ4049HDNL includes an integrated rectifier bridge for PoE Ethernet applications. Integrating rectification within the connector assembly can reduce the need for separate external rectifier components, depending on the host Powered Device (PD) architecture and the required power-path implementation.

Hardware engineers should verify the rectifier pinout, supported PoE power path, voltage and current ratings, polarity arrangement, and interface to the host PD circuitry against the official LPJ4049HDNL schematic and applicable system design requirements before finalizing the PCB.

Integrated 6-Core Magnetics and AutoMDX Support

The Ethernet section of the LPJ4049HDNL incorporates an internal 6-core magnetic structure with a 1CT:1CT turns ratio and T, C configuration. The integrated magnetics provide the electrical interface between the Ethernet PHY and the cable-side RJ45 connection while reducing the need for separate discrete magnetic components on the host board.

The connector includes a Bob Smith termination (BST) circuit and is specified for Ethernet interfaces supporting AutoMDX operation. Hardware designers should evaluate the MagJack together with the selected PHY reference design, differential-pair routing, PCB grounding, PoE power architecture, and system-level EMC requirements.

Mechanical and PCB Design Considerations

The LPJ4049HDNL combines Ethernet signal, PoE-related, LED, shield, and mechanical functions within a compact through-hole connector assembly. Designers should verify the official product drawing before releasing the PCB footprint or enclosure design.

1. Package Envelope and Board-Edge Clearance

The connector body measures 13.30 mm (0.524 inches) in height, 21.25 mm (0.837 inches) in length, and 15.93 mm (0.627 inches) in width. PCB and enclosure designers should verify these dimensions against available board-edge space, front-panel geometry, and cable plug clearance.

2. Tab-Down Latch Orientation

The LPJ4049HDNL uses a Tab-Down latch orientation. Enclosure and board designers should verify sufficient clearance below the RJ45 plug for release-tab access and confirm the connector orientation against the mechanical drawing.

3. PCB Footprint and T-Post Retention

The connector uses through-hole PCB mounting with molded T-Post retention features. Designers should verify terminal numbering, drill-hole diameters, T-Post locations, shield connections, LED terminals, and PoE-related connections against the official LPJ4049HDNL drawing before releasing the footprint.

4. Shield Configuration Without EMI Tabs

The LPJ4049HDNL uses a metal shield without external EMI tabs. System designers should verify the shield profile, front-panel cutout, PCB shield connections, grounding strategy, and mechanical clearances as part of the complete enclosure and EMC design.

5. Yellow / Green LED Interface

The connector includes Yellow and Green status LEDs. Hardware engineers should verify LED pin assignment, polarity, drive requirements, and any required external components against the LPJ4049HDNL electrical documentation and the selected PHY reference design.

Architecture Comparison: Integrated PoE MagJack vs. Discrete Implementation

Evaluation Metric LPJ4049HDNL
Integrated PoE MagJack
Discrete RJ45 + Magnetics + Rectification
Ethernet Interface 10/100BASE-T Implementation-dependent
Ethernet Magnetics Integrated 6-core magnetic structure Separate magnetic component
Rectification Integrated rectifier bridge Separate rectifier circuitry
RJ45 Connector Integrated in connector assembly Separate RJ45 connector
LED Configuration Yellow / Green integrated LEDs Implementation-dependent
Operating Temperature -40°C to +85°C Component-dependent
PCB Assembly Single integrated connector assembly Separate connector, magnetics, and rectification components
Primary Design Focus Consolidated Ethernet, magnetics, and PoE rectification Greater component-level implementation flexibility

Application Considerations for LPJ4049HDNL

Target Application Profile Primary Engineering Consideration
Smart Utility Meters & Data Concentrators The integrated 10/100BASE-T interface and rectifier bridge provide a consolidated connector option for PoE-capable network interfaces where board space and component integration are design priorities.
Industrial PCs & Embedded Controllers The -40°C to +85°C operating range supports hardware designs requiring wider temperature operation; final environmental qualification remains system-dependent.
Security Monitoring & Access-Control Equipment Integrated Ethernet magnetics, PoE rectification, and status LEDs can consolidate the physical network interface in PoE-capable embedded equipment.
Network Gateways & Communication Equipment The single-port integrated architecture combines the RJ45 interface, 10/100BASE-T magnetics, rectifier bridge, and LEDs within one through-hole connector assembly.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing a bill of materials (BOM) using the LPJ4049HDNL, engineering and sourcing teams should verify the following parameters against the official product drawing and electrical documentation:

  • Ethernet Interface: Confirm that the 10/100BASE-T interface, 1CT:1CT turns ratio, T, C configuration, and selected PHY requirements are compatible with the target design.
  • PoE and Rectifier Architecture: Verify the integrated rectifier bridge pinout, supported power path, voltage/current requirements, polarity arrangement, and interface to the host PD circuitry.
  • PCB Footprint: Check through-hole pad diameters, terminal numbering, T-Post locations, shield connections, LED terminals, and all required PCB drill dimensions against the official drawing.
  • Tab-Down Mechanical Clearance: Confirm adequate clearance for RJ45 plug insertion, cable routing, and release-tab access within the enclosure.
  • LED Interface: Verify the Yellow/Green LED pin assignment, polarity, drive requirements, and host PHY configuration against the applicable product and PHY documentation.
  • Shield and Grounding: Verify the metal shield implementation, PCB shield connections, front-panel geometry, and system grounding strategy as part of the complete EMC design.
  • Operating Temperature: Confirm that the application remains within the specified -40°C to +85°C operating range and evaluate the complete system thermal and environmental conditions.
  • Contact Plating: Select the applicable 6µ", 15µ", or 30µ" gold contact plating option according to project qualification and application requirements.

Frequently Asked Questions

What are the primary specifications of the LINK-PP LPJ4049HDNL?

The LPJ4049HDNL is a single-port 10/100BASE-T PoE RJ45 MagJack with an integrated rectifier bridge. It features a 6-core magnetic structure, 1CT:1CT turns ratio, T, C configuration, Tab-Down latch orientation, side-entry through-hole mounting, Yellow/Green LEDs, an integrated BST circuit, AutoMDX support, a metal shield without EMI tabs, and a specified operating temperature range of -40°C to +85°C.

What is the purpose of the integrated rectifier bridge in LPJ4049HDNL?

The LPJ4049HDNL includes an integrated rectifier bridge for PoE Ethernet applications. Integrating rectification within the connector assembly can reduce the need for separate external rectifier components, depending on the host Powered Device architecture. Engineers should verify the rectifier topology, pin assignment, electrical ratings, and PoE power path against the official product documentation.

What PoE standard does the LPJ4049HDNL support?

The available LPJ4049HDNL specification identifies the connector for PoE Ethernet applications and specifies an integrated rectifier bridge. The applicable IEEE PoE classification, power level, voltage/current limits, and power-path implementation should be confirmed against the official LPJ4049HDNL electrical documentation before design approval.

What is the function of the integrated 6-core magnetics?

The LPJ4049HDNL specifies a 6-core integrated magnetic structure for its 10/100BASE-T Ethernet interface, with a 1CT:1CT turns ratio and T, C configuration. The integrated magnetics provide the electrical interface between the Ethernet PHY and the cable-side RJ45 connection. Engineers should refer to the official schematic for the exact magnetic topology and termination arrangement.

What is the operating temperature range of LPJ4049HDNL?

The LPJ4049HDNL has a specified operating temperature range of -40°C to +85°C. This makes it relevant to hardware designs requiring wider temperature operation. Final system qualification should also consider enclosure protection, humidity, airflow, PCB temperature, PHY temperature, and other environmental conditions.

What is the function of the integrated Bob Smith Termination (BST) circuit?

The LPJ4049HDNL includes an integrated Bob Smith termination (BST) circuit as part of its Ethernet interface design. Engineers should refer to the official product schematic for the exact termination topology, component values, and grounding arrangement when evaluating the connector with the selected PHY and system-level EMC design.

Does LPJ4049HDNL include status LEDs?

Yes. The LPJ4049HDNL includes Yellow and Green LEDs. Their specific indication functions depend on the host PHY and LED drive configuration. Engineers should verify LED pin assignment, polarity, and drive requirements against the applicable product documentation.

Download

Product Drawing