HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open

Product Categories


Papua New Guinea LINK-PP LP11ACS2000S SFP 1x1 Cage With EMI Spring Finger

LINK-PP LP11ACS2000S: SFP 1x1 Cage Assembly with EMI finger springs. Solder through-hole, -40°C to +85°C, 9.75mm height, for optical switches & routers.
  • Compatible Brands: LINK-PP
  • Product Type: Cage Assembly
  • Data Rate (Gb/s): 4
  • EMI Shielding: Internal/External EMI Springs
  • Lightpipe Options: Without Lightpipe
  • PCB Termination: Through Hole - Solder
  • Operating Temperature (°C): -40-85
  • Number of Ports: 1x1
  • Connector Types: SFP
  • P/N: LP11ACS2000S
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Competitor P/N: LP11ACS2000S

Product Description

Product Specifications

LINK-PP Part Number LP11ACS2000S Part Status Active
Product Type Cage Assembly Form Factor SFP
Mounting Type Through Hole, Right Angle Termination Solder
Port Matrix Configuration 1x1 Number of Ports 1
Features EMI Shielded EMI Containment Feature Type EMI Finger Springs
Included Lightpipe No Height (Inches/mm) 0.384 / 9.75
Length (Inches/mm) 1.919 / 48.75 Width (Inches/mm) 0.591 / 15.10
Operating Temperature Range -40°C to +85°C Packaging Bulk / Tray

Single-Port SFP 1x1 Solder Through-Hole Cage Assembly with EMI Finger Springs

The LINK-PP LP11ACS2000S is a single-port (1x1) Small Form-Factor Pluggable (SFP) metal cage assembly designed to house compatible pluggable optical transceivers and direct attach copper (DAC) cables. Engineered for solder through-hole board termination, it incorporates perimeter EMI finger springs within a 9.75 mm package height.

Featuring a 90° right-angle mounting profile and an operating temperature range of -40°C to +85°C, the cage is supplied in bulk or tray packaging for production assembly. It is suited for enterprise switches, optical routers, network interface cards, and industrial communications hardware where standard wave or selective soldering processes and front-panel EMI containment are primary manufacturing considerations.

Hardware designers should verify PCB through-hole drill diameters, soldering profiles, bezel cutout dimensions, and internal host connector alignment against product documentation before releasing board layouts for production.

Form Factor: SFP 1x1 Single-Port Cage
Termination Style: Solder Through-Hole
EMI Containment: Perimeter EMI Finger Springs
Operating Temperature: -40°C to +85°C
Mounting Orientation: Right Angle
Packaging: Bulk / Tray

Solder Through-Hole Termination and Assembly Considerations

Selecting a solder through-hole cage assembly aligns with specific manufacturing and assembly workflows:

  • Standard Solder Process Compatibility: Solder through-hole pins allow the cage assembly to be processed using standard wave soldering or selective soldering equipment alongside other through-hole components, without requiring dedicated press-fit insertion presses.
  • Mechanical Board Anchoring: Solder fillets formed within the PCB plated through-holes provide mechanical retention to anchor the cage body during transceiver insertion, extraction, and cable routing.
  • Ground Continuity: Solder pins provide direct electrical connections from the metal cage body to the PCB ground plane, supporting system-level grounding strategies.

EMI Containment and Front-Panel Bezel Integration

System-level electromagnetic compatibility requires continuous shielding around pluggable panel openings:

1. Perimeter EMI Finger Springs

The forward mating interface of the cage features perimeter EMI finger springs designed to maintain conductive contact with the equipment front-panel bezel cutout around the SFP port, helping maintain enclosure shielding continuity at the I/O boundary.

2. Metal Shielding Enclosure

The metal cage structure provides a conductive housing around the pluggable module cavity. System-level shielding effectiveness should be evaluated as part of complete equipment EMC validation.

3. Dimensions and Board Footprint

The cage measures 9.75 mm (0.384 inches) in height, 48.75 mm (1.919 inches) in length, and 15.10 mm (0.591 inches) in width. Hardware engineers should verify the host connector position, PCB footprint, and enclosure geometry against the applicable mechanical drawings.

Architecture Comparison: SFP Pluggable Cage Variants

Evaluation Metric LP11ACS2000S
SFP 1x1 Solder Through-Hole
SFP 1x1 Press-Fit
with Heat Sink
SFP+ 1x4 Ganged
Solder Cage
Port Density Single Port (1x1 Matrix) Single Port (1x1 Matrix) 4-Port Ganged (1x4 Matrix)
Termination Style Solder Through-Hole Pins Press-Fit (Compliant Pins) Solder Through-Hole Pins
Tooling Requirement Standard soldering equipment Requires press-fit seating tool Standard soldering equipment
Operating Temperature -40°C to +85°C -55°C to +85°C or -40°C to +85°C Model-dependent
EMI Containment Perimeter EMI Finger Springs Perimeter EMI Spring Fingers Perimeter EMI Spring Fingers
Primary Design Focus Standard solder assembly for single-port I/O Solderless assembly & heat sink thermal path High port density on multi-port line cards

Application Considerations for LP11ACS2000S

Target Application Profile Mounting / Packaging Primary Engineering Consideration
Enterprise Optical Switches & Routers Solder Through-Hole / Tray Standard wave/selective soldering compatibility, single-port modular expansion, and EMI finger springs.
Industrial Ethernet Switches & Gateways Solder Through-Hole (-40°C to +85°C) -40°C to +85°C operating temperature range, through-hole solder joint anchoring for mechanical stability.
Network Interface Cards & Add-In Adapters 9.75 mm Package Height Compact 9.75 mm profile fits standard PCIe bracket envelopes with conventional through-hole soldering.
Media Converters & Optical Demarcation Units Solder Through-Hole / Bulk Cost-effective single-port SFP cage assembly for standalone and chassis-based optical transceivers.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing production tooling using the LP11ACS2000S, hardware engineers should confirm the following design parameters against the official product drawing:

  • Through-Hole Drill Pattern: Verify PCB hole diameters, annular rings, and solder pad clearances on the manufacturer's footprint drawing.
  • Soldering Process Parameters: Confirm that wave soldering or selective soldering thermal profiles align with the cage material specifications.
  • Front-Panel Bezel Cutout: Verify cutout dimensions and tolerances to ensure continuous mechanical contact with the perimeter EMI finger springs.
  • Host Connector Placement: Confirm that the SMT 20-pin SFP host connector land pattern aligns with the internal cage cavity.
  • Operating Temperature Envelope: Validate that the component operating environment remains within the specified -40°C to +85°C range.
  • Mechanical Clearances: Ensure adequate clearance for SFP optical module insertion, extraction bail latch release, and cable bend radius.

Frequently Asked Questions

What are the primary specifications of the LINK-PP LP11ACS2000S?

The LP11ACS2000S is a single-port (1x1) SFP cage assembly featuring solder through-hole termination, perimeter EMI finger springs, a right-angle profile, and an operating temperature range of -40°C to +85°C.

What is the difference between solder through-hole and press-fit SFP cages?

Solder through-hole cages use pins that are soldered into plated through-holes during wave or selective soldering processes. Press-fit cages use compliant pins that are mechanically pressed into through-holes without soldering, which requires dedicated seating tooling but avoids secondary soldering thermal exposure.

What is the function of the perimeter EMI finger springs?

The perimeter EMI finger springs are designed to maintain conductive contact with the equipment front-panel bezel cutout around the SFP opening, helping maintain enclosure shielding continuity at the I/O interface.

What is the operating temperature range for the LP11ACS2000S?

The LP11ACS2000S is specified for an operating temperature range of -40°C to +85°C, making it suitable for standard commercial data center environments as well as extended-temperature industrial networking applications.

Does the LP11ACS2000S include integrated light pipes?

No. The LP11ACS2000S is specified without integrated light pipes, allowing hardware designers to maximize shielding enclosure coverage while implementing separate front-panel status indicators as required by the equipment design.

What type of transceivers can be used with this cage assembly?

The LP11ACS2000S is designed to house standard Small Form-Factor Pluggable (SFP) optical transceivers and direct attach copper (DAC) cables conforming to SFP Multi-Source Agreement (MSA) mechanical specifications.

Download