Product Categories
Papua New Guinea LP11AC02060 SFP 1x1 Cage With EMI Spring Finger Heat Sink Press-Fit Through Hole
- Compatible Brands: LINK-PP
- Product Type: Cage
- Data Rate (Gb/s): 4
- EMI Shielding: Internal/External EMI Springs
- Lightpipe Options: Without Lightpipe
- PCB Termination: Through Hole - Press-Fit
- Operating Temperature (°C): -55-85
- Number of Ports: 1x1
- Connector Types: SFP,QSFP+
- P/N: LP11AC02060
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Competitor P/N: LP11AC02060
Category:
Product Description
Product Specifications
| LINK-PP Part Number | LP11AC02060 | Part Status | Active |
| Connector Style | Cage | Connector Type | SFP |
| Cage Material | Copper Alloy, Nickel Plated | Packaging | Tray Packaging |
| Port Matrix Configuration | 1x1 Port | Number of Ports | 1 |
| Operating Temperature Range | -55°C to +85°C | Mounting Style | Through Hole, Right Angle |
| Included Lightpipe | No | Termination | Press-Fit |
| Package Height (Inches/mm) | 0.384 / 9.75 | Package Length (Inches/mm) | 1.919 / 48.75 |
| Package Width (Inches/mm) | 0.571 / 14.50 | EMI Containment Feature Type | EMI Springs |
Single-Port SFP 1x1 Cage with Integrated Heat Sink and EMI Spring Fingers
The LINK-PP LP11AC02060 is a single-port (1x1) Small Form-Factor Pluggable (SFP) metal cage assembly engineered to house compatible pluggable optical transceivers and direct attach copper (DAC) cables. Manufactured from nickel-plated copper alloy, it incorporates press-fit compliant pin termination, an integrated heat sink, and perimeter EMI spring fingers in a 9.75 mm package height.
Featuring a 90° right-angle board-mounting profile and an operating temperature range of -55°C to +85°C, the cage is supplied in tray packaging for volume assembly. It is suited for optical transmission hardware, enterprise switches, outdoor wireless base stations, routers, and embedded communication systems where solderless press-fit mounting, thermal conduction toward system airflow, and front-panel EMI containment are primary design considerations.
Hardware designers should verify PCB plated through-hole (PTH) drill diameters, insertion tooling requirements, bezel cutout dimensions, and host connector alignment against product documentation before releasing board layouts for production.
Press-Fit Compliant Pin Termination and PCB Considerations
High-speed networking motherboards and backplanes require mechanical interconnects that avoid the thermal exposure of secondary soldering processes:
- Mechanical and Electrical Connection: Press-fit compliant pins establish a solderless mechanical and electrical interface through the PCB plated through-holes, avoiding secondary soldering operations on multilayer circuit boards.
- Mechanical Retention: The press-fit pin matrix provides mechanical anchoring into the PCB, helping support the connector assembly during transceiver insertion and extraction.
- Rework Considerations: Solderless press-fit assembly can simplify certain manufacturing or service operations by avoiding additional soldering, while extraction and replacement procedures should follow the applicable tooling and PCB design requirements.
Thermal Management and Operating Temperature Range
Optical transceivers generate localized heat during operation. The LP11AC02060 incorporates specific structural features to assist thermal management in system enclosures:
- Integrated Thermal Management: The integrated heat sink is designed to contact the top surface of the inserted SFP module and provide a thermal path from the transceiver body toward the surrounding system airflow.
- Extended Temperature Envelope: The -55°C to +85°C specification defines the stated operating temperature range of the cage assembly for applications exposed to wider environmental temperature conditions.
- Without-Lightpipe Configuration: The solid top and side shield structure maximizes heat sink contact area, allowing port status LEDs to be routed via separate front-panel indicators or light pipes according to enclosure requirements.
EMI Containment and Front-Panel Bezel Integration
System-level electromagnetic compatibility requires continuous shielding around pluggable panel openings:
1. Perimeter EMI Spring Fingers
The perimeter EMI spring fingers are designed to maintain conductive contact with the equipment front-panel bezel around the SFP opening, helping maintain enclosure shielding continuity at the module interface.
2. Nickel-Plated Metal Construction
The copper-alloy structure provides a conductive metal enclosure, while the nickel-plated surface provides the specified surface finish for the cage assembly. Mechanical and environmental performance should be evaluated against the applicable product specifications and system requirements.
3. Dimensions and Board Footprint
The cage measures 9.75 mm (0.384 inches) in height, 48.75 mm (1.919 inches) in length, and 14.50 mm (0.571 inches) in width. Hardware engineers should verify the host connector position, PCB footprint, and enclosure geometry against the applicable mechanical drawings.
Architecture Comparison: SFP Pluggable Cage Variants
| Evaluation Metric | LP11AC02060 SFP 1x1 Press-Fit with Heat Sink |
Standard SFP 1x1 Solder Through-Hole Cage |
SFP 1x4 Ganged Press-Fit Cage |
|---|---|---|---|
| Port Density | Single Port (1x1 Matrix) | Single Port (1x1 Matrix) | 4-Port Ganged (1x4 Matrix) |
| Termination Style | Press-Fit (Compliant Pins) | Solder Through-Hole Pins | Press-Fit (Compliant Pins) |
| Thermal Feature | Integrated Riding Heat Sink | Standard cage body (No heat sink) | Optional heat sinks per port |
| Operating Temperature | -55°C to +85°C | Model-dependent (typically -40°C to +85°C) | Model-dependent |
| EMI Containment | Perimeter EMI Spring Fingers | EMI Springs or Elastomeric Gasket | Perimeter EMI Spring Fingers |
| Primary Design Focus | Solderless assembly & heat sink thermal path | Standard wave soldering for conventional boards | High port density on multi-port line cards |
Application Considerations for LP11AC02060
| Target Application Profile | Mounting / Packaging | Primary Engineering Consideration |
|---|---|---|
| Enterprise Optical Switches & Routers | Press-Fit / Tray Packaging | Solderless backplane assembly, integrated heat sink for optical module thermal management, EMI spring fingers. |
| Outdoor Wireless Equipment & Remote Radio Units | Press-Fit (-55°C to +85°C) | Extended operating temperature range, nickel-plated metal construction, and press-fit mechanical attachment. |
| Industrial Communication Hardware | Press-Fit / Right Angle | Solderless press-fit interconnection for systems where secondary soldering processes should be avoided. |
| High-Speed Network Cards & Accelerators | 9.75 mm Package Height | Compact package height for systems where vertical clearance and airflow must be considered. |
Engineering Verification Checklist
Before releasing a PCB layout or finalizing production tooling using the LP11AC02060, hardware engineers should confirm the following design parameters against the official product drawing:
- Plated Through-Hole (PTH) Dimensions: Verify the required finished drill diameter and PCB plating requirements for the press-fit terminals against the connector drawing and your PCB fabrication specification.
- Press-Fit Insertion Tooling: Ensure availability of appropriate flat-rock or dedicated connector seating tools to apply uniform insertion force without deforming the cage body.
- Front-Panel Bezel Cutout: Confirm cutout dimensions and tolerances to ensure continuous mechanical contact with the perimeter EMI spring fingers.
- Host Connector Placement: Verify the SMT 20-pin SFP host connector land pattern aligns with the internal cage footprint.
- Heat Sink & Airflow Clearances: Ensure adequate vertical clearance for the integrated heat sink and confirm that system airflow aligns across the cooling fins.
- Operating Temperature Envelope: Validate that the component operating environment remains within the specified -55°C to +85°C range.
Frequently Asked Questions
What are the primary specifications of the LINK-PP LP11AC02060?
The LP11AC02060 is a single-port (1x1) SFP cage assembly featuring press-fit compliant pin termination, an integrated heat sink, perimeter EMI spring fingers, nickel-plated copper alloy construction, and an operating temperature range of -55°C to +85°C.
What are the advantages of press-fit termination over solder through-hole mounting?
Press-fit termination establishes a solderless mechanical and electrical connection through the PCB plated through-holes. It can reduce exposure to secondary soldering processes and may simplify manufacturing or rework workflows, depending on the system design and insertion tooling.
How does the integrated heat sink assist in thermal management?
The integrated heat sink is designed to contact the top surface of the inserted SFP module, providing a conductive thermal path from the transceiver body toward the surrounding system airflow to assist module cooling.
What is the function of the perimeter EMI spring fingers?
The perimeter EMI spring fingers are designed to maintain conductive contact with the equipment front-panel bezel cutout around the SFP opening, helping maintain enclosure shielding continuity at the I/O interface.
Why is the -55°C to +85°C operating temperature rating significant?
The -55°C to +85°C specification defines the stated operating temperature range of the cage assembly and makes it relevant to designs exposed to wider environmental temperature conditions. Final system qualification should also consider the optical module, host board, enclosure, airflow, and other components in the complete assembly.
Does the LP11AC02060 include integrated light pipes?
No. The LP11AC02060 is specified without integrated light pipes, allowing hardware designers to maximize shielding coverage and heat sink contact area while implementing separate front-panel status indicators as required.
Download
Product Drawing
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications



























