HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open

Product Categories


Namibia Without LED 1X1 Port 8P8C Vertical RJ45 Jack without Integrated Magnetics

LINK-PP LPJE681DNL is a 180° vertical unmagnetized 1x1 RJ45 jack, non-LED, smooth shield, industrial temp -40°C to +85°C. Download STEP & RFQ.
  • Compatible Brands: LINK-PP
  • Number of Ports: 1x1
  • Pin Type: THT SOLDER
  • LED Option: No LEDs
  • Latch: Up
  • Temperature: -40℃ to +85℃
  • Shield EMI Tabs: NO
  • Orientation: 180° Angle
  • P/N: LPJE681DNL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LPJE681DNL

Product Description

Product Specifications

LINK-PP Part Number: LPJE681DNL Connector Type Jack
Part Status Active Mounting Type Through Hole
Number of Positions/Contacts 8p8c (RJ45, Ethernet) Application-Lan -
Number of Ports 1x1 Port Speed -
Latch Up Cores per Port -
Orientation 180° Angle (Right) PCB Mount Angle THT Solder
Shield EMI Tabs Without LED Option Without
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.639/16.24 Package Length (Inches/mm) 0.657/16.69
Package Width (Inches/mm) 0.626/15.89 Temperature -40℃ TO 85℃
Bst Circuit Yes AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

LINK-PP LPJE681DNL Technical Overview

The LINK-PP LPJE681DNL is a single-port (1x1) 180-degree vertical (top-entry) non-magnetic 8p8c RJ45 modular jack. Designed with a smooth metal shield (without external EMI tabs), Tab-Up latch orientation, and an extended industrial operating temperature rating of -40°C to +85°C, it provides perpendicular cable insertion for through-hole technology (THT) mounting on FR4 mainboards using discrete PCB-mounted magnetics or non-magnetics communication interfaces.

  • 180° Vertical Top-Entry Orientation: Perpendicular PCB mount geometry allows vertical cable insertion for top-panel cutouts and stacked board sub-assemblies.
  • Unmagnetized Modular Architecture: Designed without internal transformers to mate with discrete, PCB-mounted magnetic modules or custom PHY topologies.
  • Industrial Operating Temperature (-40°C to +85°C): Fully rated for harsh environmental conditions, unconditioned outdoor cabinets, and industrial control systems.
  • Smooth Metal Shield Profile: Smooth shield faceplate without external EMI spring tabs prevents mechanical snagging during bezel cutout insertion.

Key Design Benefits

  • Vertical Top-Entry Layout Advantage: 180° orientation is ideal for equipment where Ethernet cables plug vertically into the top or rear chassis panel.
  • Discrete Magnetics Compatibility: Allows hardware designers to pair the connector with specialized discrete isolation transformers or PHY reference designs on the motherboard.
  • Extended Industrial Thermal Range: Operates reliably across -40°C to +85°C, making it suitable for outdoor power generators, industrial controllers, and diagnostic hardware.
  • Streamlined Non-LED Faceplate: Eliminates optical light bleed, making it suitable for dark server cabinets, security enclosures, or internal mainboards.
  • Supply Chain Continuity: Offers hardware engineering and procurement teams an industrial-grade 180° vertical THT footprint option for secondary sourcing.

Mechanical & Substrate Integration

Designed for automated through-hole technology (THT) assembly, the LPJE681DNL incorporates package dimensions of 16.24mm (H) x 15.89mm (W) x 16.69mm (L) [0.639 x 0.626 x 0.657 in]. The 180-degree vertical orientation positions the RJ45 port perpendicular to the FR4 PCB surface. Contact mating areas are available with Gold 6u", 15u", or 30u" plating options to ensure corrosion resistance across repeated mating cycles.

Target Applications

  • Industrial Controllers & Power Generators: Vertical top-entry RJ45 interface for industrial control modules and power generator mainboards using discrete magnetics.
  • Top-Panel Diagnostic Terminals: 180° vertical mounting for diagnostic hardware and top-panel equipment cutouts.
  • Embedded Mainboards & Gateways: Compact 1x1 vertical unmagnetized modular jack for thin client computers and industrial fieldbus cards.

LINK-PP LPJE681DNL Design Verification Checklist

When evaluating the LINK-PP LPJE681DNL for new designs or second-sourcing qualification, hardware engineers should verify the following parameters against their system specification:

  • Discrete Magnetics Requirement: Confirm that your circuit design utilizes discrete board-mounted transformers rather than an integrated magnetic module (ICM).
  • 180° Vertical Mounting Orientation: Verify that your chassis design requires a top-entry (vertical) RJ45 jack instead of a 90° right-angle side-entry jack.
  • Thermal Class Verification: Confirm that the -40°C to +85°C industrial temperature rating meets your target operating environment requirements.
  • Smooth Shield & Non-LED Profile: Verify that your enclosure faceplate accommodates a non-LED smooth shield without external EMI spring tabs.

Frequently Asked Questions

What are the primary mechanical and electrical specs of the LINK-PP LPJE681DNL?

The LPJE681DNL is a single-port (1x1) 180-degree vertical (top-entry) unmagnetized 8p8c RJ45 modular jack featuring Tab-Up latching, non-LED faceplate, smooth metal shield, THT solder mounting, and an extended industrial operating temperature rating of -40°C to +85°C.

What is the mechanical advantage of a 180° vertical RJ45 connector like the LPJE681DNL?

A 180-degree vertical orientation allows Ethernet cables to plug straight down perpendicular to the circuit board, making it ideal for top-panel enclosure cutouts, wall-mounted control systems, and stacked circuit board sub-assemblies.

What engineering assets are available for LPJE681DNL PCB design-in?

LINK-PP provides complete design-in support assets, including 3D STEP models for mechanical enclosure clearance, 2D dimensional CAD drawings, PCB footprint land patterns for EDA software (Altium, Cadence, KiCad), and product specification sheets.

How can procurement and engineering teams request samples or a quotation for LINK-PP LPJE681DNL?

Procurement and engineering teams can contact LINK-PP to request LPJE681DNL evaluation samples for mechanical, electrical, and PCB compatibility verification. After qualification, our technical sales team can provide competitive pricing, production lead-time estimates, MOQ terms, and volume-order support.

Download