Product Categories
Namibia LPJE681XDNL Without LED 1X1 Port 8P8C Vertical RJ45 Jack without Integrated Magnetics
- Compatible Brands: LINK-PP
- Number of Ports: 1x1
- Pin Type: THT SOLDER
- LED Option: No LEDs
- Latch: Up
- Temperature: -40℃ to +85℃
- Shield EMI Tabs: NO
- Orientation: 180° Angle
- P/N: LPJE681XDNL
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LPJE681XDNL
Category:
Product Description
Product Specifications
| LINK-PP Part Number: | LPJE681XDNL | Connector Type | Jack |
| Part Status | Active | Mounting Type | Through Hole |
| Number of Positions/Contacts | 8p8c (RJ45, Ethernet) | Application-Lan | - |
| Number of Ports | 1x1 Port | Speed | - |
| Latch | Up | Cores per Port | - |
| Orientation | 180° Angle (Right) | PCB Mount Angle | THT Solder |
| Shield EMI Tabs | Without | LED Option | Without |
| PCB | FR4 | PCB Retaining Post | T POST |
| Package Height (Inches/mm) | 0.639/16.24 | Package Length (Inches/mm) | 0.657/16.69 |
| Package Width (Inches/mm) | 0.626/15.89 | Temperature | -40℃ TO 85℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | No | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
LINK-PP LPJE681XDNL Vertical RJ45 Modular Jack | Without Integrated Magnetics 8P8C RJ45 Jack,Without LED,RoHS
The LINK-PP LPJE681XDNL is a ruggedized, industrial-grade Vertical (180°) RJ45 Modular Jack. Engineered strictly as a pure mechanical physical layer interface without integrated magnetics and without LEDs, this 8p8c connector provides hardware designers with absolute PCB layout flexibility. It allows network architects to pair the jack with specific discrete LAN transformers tailored to their exact Ethernet PHY, voltage isolation, and spatial requirements.
Each LPJE681XDNL Vertical RJ45 Jack is manufactured under stringent quality control protocols, including 100% mechanical endurance testing, contact resistance verification, and structural integrity inspections to ensure highly reliable physical network connections. The component complies with universal Ethernet mechanical interface standards and maintains global safety and environmental certifications: UL Recognized, RoHS, REACH, ISO9001, and ISO14001.
Vertical "Top-Entry" Architecture & Spatial Optimization
This pure mechanical jack is specifically optimized for tight enclosure constraints and complex board-to-board architectures where standard right-angle (side-entry) jacks cannot be deployed. The 180-degree top-entry mounting profile drastically minimizes the horizontal PCB footprint. This orientation is highly advantageous for multi-layer stacked PCBA architectures, vertical daughtercards, and densely packed networking equipment requiring top-down cable patching.
Industrial Thermal Rating & Layout Flexibility
By omitting internal transformers (magnetics), this connector is completely speed-agnostic, supporting anything from 10/100Base-T up to Gigabit and 10G Ethernet, depending entirely on the external magnetics utilized on the motherboard:
- Industrial Temperature Endurance: Boasts a true industrial operating temperature range of -40°C to +85°C, preventing plastic housing degradation and maintaining strict contact normal force in extreme outdoor or high-heat environments.
- Unfiltered Mechanical Pass-Through: Provides raw signal pass-through, eliminating unnecessary BOM costs for hardware designs that already utilize robust discrete magnetics on the mainboard.
- Flush Enclosure Fit (Without EMI Tabs): Designed without external EMI spring tabs and without LEDs, allowing for a flush, interference-free fit against custom-milled metal enclosures or tight plastic faceplates where mechanical clearance is restricted.
- High-Cycle Contact Plating: Available with premium Gold plating (6u"/15u"/30u") on the mating area to prevent oxidation and ensure low contact resistance over thousands of insertion/extraction cycles.
Typical Applications & Industry Use Cases
Due to its top-entry vertical design, industrial thermal rating, and raw mechanical flexibility, the LPJE681XDNL is the preferred solution for:
- Industrial Computing: Stacked multi-layer Industrial PCs (IPC), single-board computers (SBC), and compact edge AI servers requiring vertical cable routing.
- Networking Equipment: Top-entry edge routers, compact unmanaged switches, and specialized media converters.
- Test & Measurement: Diagnostic equipment, data loggers, and automated test rigs requiring vertical RJ45 cable insertion.
- Power & Control: High-density SMPS (Switched Mode Power Supplies) and automation control panels.
Download
Product Drawing
3D Model
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications



























