HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open

Product Categories


Namibia LINK-PP LP21BC01201 2x1 Port SFP+ Cage Connector With Inner LightPipe

Technical specs for LINK-PP LP21BC01201 2x1 stacked SFP+ cage connector. Features inner lightpipe, press-fit for 2.36mm PCB & 10G/16G FC.
  • Compatible Brands: LINK-PP
  • Product Type: Cage
  • Data Rate (Gb/s): 16
  • EMI Shielding: Internal/External EMI Springs
  • Lightpipe Options: With Lightpipe
  • PCB Termination: Through Hole - Press-Fit
  • Operating Temperature (°C): -40-85
  • Number of Ports: 2xN
  • Connector Types: SFP+
  • P/N: LP21BC01201
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Competitor P/N: LP21BC01201

Product Description

Product Specifications

LINK-PP Part Number LP21BC01201 Part Status Active
Connector Style Receptacle with Cage, Ganged (2x1) Connector Type SFP+
Data Rate (Max)(Gb/s) - Mounting Type Through Hole, Right Angle
Termination Press-Fit Features EMI Shielded
Port Matrix Configuration 2x1 Ports Number of Ports 2
Operating Temperature Range -40 – 85°C Pluggable I/O Applications SFP+
Circuit Application - EMI Containment Feature Type External Springs
Included Lightpipe With Cage Material COPPER ALL OY 30u”
Length (Inches/mm) 63.25/2.490 Width (Inches/mm) 14.00/0.551
Height (Inches/mm) 25.53/1.005 PCB Thickness (Recommended) 2.36MM( .093 INCH)

LINK-PP LP21BC01201 2x1 Stacked SFP+ Cage Connector Technical Overview

The LINK-PP LP21BC01201 is an industry-standard 2x1 stacked SFP+ cage assembly with an integrated electrical host connector and an inner lightpipe engineered for high-density 10Gb/s Ethernet and 16Gb/s Fibre Channel systems. Featuring solderless press-fit PCB mounting, copper alloy construction with 30µ" plating, and external metallic EMI springs, it delivers vertical 2-port I/O consolidation, optical LED link status diagnostics, and reliable chassis grounding for enterprise switches, SAN storage directors, and industrial telecom infrastructure.

  • Mechanical Form Factor: 2x1 Stacked 2-Port Vertical SFP+ Receptacle Cage Assembly with integrated dual-tier electrical receptacle and inner lightpipe optics (2.490" L x 0.551" W x 1.005" H).
  • Signal Ecosystem Support: Engineered for 10GbE optical transceivers, 16G Fibre Channel modules, and Direct Attach Copper (DAC) cables operating up to 16 Gb/s (SFF-8431).
  • Board Mount Technology: Solderless Through-Hole Press-Fit termination, specifically tailored for heavy-duty 2.36mm [.093 in] thick enterprise PCB substrates.
  • Cross-Reference Sourcing: Direct footprint-compatible alternative to industry 2x1 stacked SFP+ cage assemblies from TE Connectivity, Molex, and Amphenol for supply chain diversification.

LINK-PP LP21BC01201 SFP+ Cage Connector Product Overview

LINK-PP LP21BC01201 is an integrated 2x1 stacked SFP+ receptacle and cage assembly featuring inner lightpipe optics, external perimeter metallic EMI spring gaskets, premium copper alloy 30µ" construction, and press-fit PCB mounting. Designed for vertical port expansion on thick multi-layer line cards in enterprise core switches, SAN storage arrays, and industrial networking enclosures, this 2-port stacked assembly integrates the electrical card-edge receptacle inside the cage body, eliminating secondary SMT host connector reflow operations (-40°C to +85°C).

Key Benefits of LINK-PP LP21BC01201 SFP+ Cage Connector

  • Integrated Receptacle & LightPipe Architecture: Houses the dual-tier 40-position electrical connector, metallic copper alloy cage shell, and inner lightpipe optics in a single press-fit unit, eliminating separate SMT connector and lightpipe assembly steps.
  • Integrated Inner LightPipe LED Diagnostics: Pre-installed inner optical lightpipe captures SMT LED light from the PCB and routes it cleanly to the front bezel, providing real-time visual link and activity status monitoring without cross-port light bleed.
  • Thick Enterprise Board Matching (2.36mm / .093"): Specifically engineered for thick 2.36mm [.093 in] multi-layer PCB motherboards, ensuring optimal press-fit pin engagement, mechanical retention, and grounding stability.
  • Vertical 2x1 Stacked Density Consolidation: Stacks two SFP+ ports vertically in a single column, doubling front-panel port capacity per linear inch of bezel width on 1RU/2RU switch line cards.
  • Premium Copper Alloy 30u" Construction: Formed with 30µ" plated copper alloy, ensuring low transfer contact resistance, superior wear resistance over repeated module insertions, and enhanced thermal heat dissipation.
  • Multi-Source Drop-In Compatibility: Standard SFP+ MSA mechanical footprint enables seamless deployment alongside original OEM equipment for BOM cost optimization and lead-time reduction.

2x1 Vertical Stacked Architecture with Integrated Receptacle & Inner LightPipe

Engineered in compliance with SFP+ MSA (SFF-8431) mechanical specifications, the LINK-PP LP21BC01201 features a 2x1 stacked (two ports arranged vertically) architecture containing an integrated 40-position card-edge connector and precision inner lightpipes. This all-in-one housing guarantees perfect alignment between electrical contacts, cage openings, and lightpipe exit ports on the front panel bezel.

Inner Optical LightPipe Diagnostics & PCB Integration

The pre-installed inner lightpipe assembly captures light emitted from surface-mount LEDs on the motherboard and guides it along the upper superstructure to the front faceplate. The right-angle board mount geometry and press-fit compliant pin structure are engineered specifically for thick 2.36mm [.093 in] multi-layer PCB substrates, providing high mechanical holding force and reliable electrical contact across all PTH vias.

EMI Shielded SFP+ Cage Design with External Springs

Operating dual stacked ports at high-frequency 16 Gb/s serial rates requires rigorous electromagnetic compatibility (EMC) design to control radiated emissions and prevent channel crosstalk between upper and lower ports.

360-Degree External EMI Shielding Springs

The LINK-PP LP21BC01201 incorporates external perimeter metallic spring contacts around both upper and lower port openings. When inserted through the front panel cutout, these springs establish low-impedance grounding against the chassis bezel, forming a continuous Faraday shielding barrier across the stacked 2x1 interface.

Corrosion-Resistant Copper Alloy 30u" Construction

Formed from high-conductivity copper alloy with a 30µ" plating finish, the cage housing delivers high structural rigidity, excellent mechanical wear resistance, and long-term corrosion protection across an industrial operating temperature range of -40°C to +85°C. This supports system-level EMC design requirements for equipment targeting FCC and CE compliance.

Press-Fit SFP+ Integrated Receptacle Assembly & PCB Integration

Designed for automated, high-reliability solderless PCB manufacturing, the LP21BC01201 utilizes precision compliant press-fit pin technology for signal, power, and ground contacts.

Solderless All-Through-Hole Press-Fit Termination

The combined assembly installs mechanically into host PCB plated through-holes (PTH) using a single controlled press insertion tool. This solderless Through-Hole Technology (THT) eliminates high-temperature SMT reflow ovens or secondary wave soldering operations, preserving high-speed signal integrity and simplifying line card production rework.

Target Applications: Enterprise Switches, SAN Storage Directors, and Industrial Telecom

Combining SFP+ MSA compliance, 2x1 vertical stacked density, inner lightpipes, and 2.36mm PCB press-fit receptacle technology, the LINK-PP LP21BC01201 supports high-density networking systems:

  • High-Density Enterprise Switches & Routers: Ideal for 10GbE Top-of-Rack (ToR) switches, enterprise core routers, and aggregation line cards requiring vertical port stacking and visual status diagnostics.
  • Enterprise Storage Area Networks (SAN): Deployed in 16G Fibre Channel director modules, SAN storage expansion chassis, and host bus adapters (HBAs).
  • Industrial & Edge Infrastructure: Suitable for extended temperature outdoor enclosures, 10G CPRI wireless base station units (BBU), and optical transport platforms (OTN).

How to Select and Verify an SFP+ Cage Assembly Replacement

When evaluating or sourcing 2x1 stacked SFP+ cage assemblies with integrated connectors and lightpipes for new line card designs or supply chain diversification, hardware engineers should verify the following core parameters:

  • Integrated Receptacle & Lightpipe Configuration: Confirm whether your PCB footprint and faceplate require an all-in-one integrated 2x1 cage with pre-installed connector and Inner LightPipe channels versus discrete cages.
  • PCB Substrate Thickness Compatibility: Ensure the press-fit pin tail length matches your motherboard thickness (LINK-PP LP21BC01201 is specifically optimized for thick 2.36mm [.093 in] PCBs).
  • Mechanical Envelope Dimensions: Verify that the 63.25mm length, 14.00mm width, and 25.53mm height envelope fits within your card slot pitch and front bezel cutout dimensions.
  • EMI Shielding Mechanism (External Springs vs Elastomeric Gaskets): Confirm whether your chassis bezel cutout design is optimized for metallic spring fingers (providing low contact resistance) or conductive elastomeric gaskets.
  • Mechanical Drawing Verification: Check 40-position press-fit hole layouts, lightpipe exit dimensions, and grounding spring tolerances against official engineering drawings.

Frequently Asked Questions

What is LINK-PP LP21BC01201?

LINK-PP LP21BC01201 is an integrated 2x1 vertical stacked SFP+ cage assembly featuring a 40-position host electrical connector, an inner lightpipe, and external metallic EMI springs. It supports 10GbE and 16G Fibre Channel transceivers in high-density enterprise switches and storage arrays.

What is the difference between LINK-PP LP21BC01201 and LP21BC01101?

The primary difference lies in the lightpipe optic configuration. LINK-PP LP21BC01201 features an Inner LightPipe configuration, whereas LINK-PP LP21BC01101 incorporates both Outer and Inner LightPipes for dual-channel status indication. Both share identical 2x1 stacked dimensions, 2.36mm PCB press-fit mounting, and copper alloy 30µ" construction.

What PCB thickness is recommended for LINK-PP LP21BC01201?

LINK-PP LP21BC01201 is optimized for a recommended PCB thickness of 2.36mm [.093 in]. Its press-fit compliant tails ensure proper mechanical pin engagement and electrical contact retention in heavy-duty multi-layer enterprise boards.

Is LINK-PP LP21BC01201 compatible with TE Connectivity or Molex 2x1 SFP+ cages?

Yes. LINK-PP LP21BC01201 is engineered in strict compliance with SFP+ MSA (SFF-8431) mechanical footprint specifications, making it a direct physical, mechanical, and electrical drop-in replacement for equivalent 2x1 stacked SFP+ cages from major OEMs.

What are the key mechanical features of LINK-PP LP21BC01201?

Key features include a 2x1 vertical stacked layout, integrated 40-position dual-tier electrical connector, inner lightpipe optics, external metallic EMI shielding springs, copper alloy 30µ" plated construction, and solderless press-fit termination rated from -40°C to +85°C.

How does an integrated 2x1 cage connector simplify PCB manufacturing?

By combining the cage shell and electrical host connector into a single press-fit assembly, engineers eliminate separate surface-mount (SMT) reflow processing for the host connector. Both electrical contacts and mechanical cage legs are pressed into plated through-holes in a single step.

Download

Product Drawing