HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open

Product Categories


Namibia LP24BC01301 2x4 SFP+ Cage Connector Press-Fit With Outer Light Pipe

Technical specs for LINK-PP LP24BC01301 2x4 stacked 8-port SFP+ cage connector. Features outer lightpipes, press-fit mounting & EMI springs for 10G/16G FC.
  • Compatible Brands: LINK-PP
  • Product Type: Cage Assembly
  • Data Rate (Gb/s): 16
  • EMI Shielding: Internal/External EMI Springs
  • Lightpipe Options: With Lightpipe
  • PCB Termination: Through Hole - Press-Fit
  • Operating Temperature (°C): -40-85
  • Number of Ports: 2xN
  • Connector Types: SFP+
  • P/N: LP24BC01301
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Competitor P/N: LP24BC01301

Product Description

Product Specifications

LINK-PP Part Number LP24BC01301 Part Status Active
Connector Style Cage Connector Type SFP+
Port Matrix Configuration 2x4 Port Data Rate (Max) 16Gb/s
Operating Temperature Range -40 – 85°C Mounting Style Through Hole, Right Angle
Included Lightpipe Outer Light Pipe Termination Press-Fit
Height (Inches/mm) 25.36/0.998 Length (Inches/mm) 63.25/2.490
Width (Inches/mm) 57.50/2.264 EMI Containment Feature Type EMI Springs

LINK-PP LP24BC01301 2x4 Stacked SFP+ Cage Connector Technical Overview

The LINK-PP LP24BC01301 is an industry-standard 2x4 stacked SFP+ 8-port octal cage assembly featuring integrated outer optical lightpipes engineered for high-density 10Gb/s Ethernet and 16Gb/s Fibre Channel networking platforms. Constructed with high-conductivity metallic alloy shielding and utilizing solderless press-fit PCB mounting, it provides octal-port vertical and horizontal I/O consolidation, real-time optical LED link status diagnostics, and resilient chassis EMI grounding for enterprise switches, SAN storage directors, and industrial telecom infrastructure.

  • Mechanical Form Factor: 2x4 Stacked 8-Port SFP+ Cage Assembly with integrated outer optical lightpipes (2.490" L x 2.264" W x 0.998" H / 63.25mm L x 57.50mm W x 25.36mm H).
  • Signal Ecosystem Support: Engineered for 10GbE optical transceivers, 16G Fibre Channel modules, and Direct Attach Copper (DAC) cables operating up to 16 Gb/s (SFF-8431).
  • Board Mount Technology: Solderless Through-Hole Press-Fit termination for robust PCB mechanical retention and contact force.
  • Cross-Reference Sourcing: Direct footprint-compatible alternative to industry 2x4 stacked SFP+ cage assemblies from TE Connectivity, Molex, and Amphenol for supply chain diversification.

LINK-PP LP24BC01301 SFP+ Cage Connector Product Overview

LINK-PP LP24BC01301 is a 2x4 stacked SFP+ cage assembly featuring integrated outer lightpipe optics, metallic EMI shielding springs, durable alloy construction, and press-fit PCB mounting. Designed for octal-port density expansion on multi-layer line cards in enterprise core switches, SAN storage arrays, and industrial networking enclosures, this 8-port stacked assembly routes board-mounted LED light cleanly to front faceplate indicator ports while providing 360-degree EMI shielding across an extended industrial operating temperature range (-40°C to +85°C).

Key Benefits of LINK-PP LP24BC01301 SFP+ Cage Connector

  • Maximum 2x4 Octal 8-Port Density Consolidation: Arranges eight SFP+ ports in a 2-row by 4-column matrix, dramatically increasing front-panel I/O capacity per linear inch of faceplate width on 1RU/2RU switch line cards.
  • Integrated Outer LightPipe Optics: Pre-assembled outer optical lightpipes guide SMT LED light from the PCB cleanly to the front panel, providing clear visual link and activity status diagnostics without light bleeding.
  • 360-Degree External EMI Spring Shielding: Perimeter metallic spring fingers establish resilient contact force across the wide 57.50mm bezel cutout for consistent high-frequency grounding and EMC performance.
  • Solderless Through-Hole Press-Fit Integration: Precision press-fit compliant pins enable automated board insertion without subjecting sensitive motherboard substrates and adjacent SMT components to solder reflow thermal stress.
  • Extended Industrial Operating Envelope (-40°C to +85°C): Built for long-term electrical and mechanical reliability in demanding enterprise data centers, outdoor telecom cabinets, and edge compute environments.
  • Multi-Source Drop-In Compatibility: Standard SFP+ MSA mechanical footprint enables seamless deployment alongside original OEM equipment for BOM cost optimization and lead-time reduction.

2x4 Vertical & Horizontal Stacked Architecture with Outer LightPipes

Engineered in compliance with SFP+ MSA (SFF-8431) mechanical specifications, the LINK-PP LP24BC01301 features a 2x4 stacked (two rows high by four columns wide) architecture containing pre-installed outer lightpipe optics. This eight-port housing establishes uniform port-to-port pitch across the front panel, simplifying chassis bezel cutout alignment while streamlining automated board placement compared to multiple discrete cages.

Outer Optical LightPipe Diagnostics & Octal-Port Layout

The integrated lightpipe assembly captures light emitted from surface-mount LEDs on the motherboard and guides it along the upper superstructure to the front faceplate. This optical routing allows hardware architects to implement clear visual port diagnostics (link state, speed, and activity) across all eight stacked ports directly on the switch front faceplate.

Precision Press-Fit Integration for High-Density Board Assembly

The right-angle board mount geometry and press-fit compliant pin layout ensure balanced insertion forces into plated through-holes (PTH). This robust mechanical footprint resists board flexing during simultaneous transceiver insertions across adjacent ports.

EMI Shielded SFP+ Cage Design with External Spring Contacts

Operating eight adjacent ports at high-frequency 16 Gb/s serial rates requires rigorous electromagnetic compatibility (EMC) design to control radiated emissions and prevent channel crosstalk between adjacent vertical and horizontal ports.

Wide-Bezel External EMI Shielding Springs

The LINK-PP LP24BC01301 incorporates perimeter metallic spring contacts around all eight port openings. When inserted through the front panel, these springs establish low-impedance grounding against the chassis bezel cutout, forming a continuous Faraday shielding barrier across the entire 2x4 octal-port interface.

Corrosion-Resistant High-Conductivity Alloy Construction

Formed from high-conductivity alloy materials with protective plating, the cage housing delivers high structural rigidity, mechanical wear resistance, and long-term corrosion protection across an industrial operating temperature range of -40°C to +85°C. This supports system-level EMC design requirements for equipment targeting FCC and CE compliance.

Target Applications: Enterprise Switches, SAN Storage Directors, and Industrial Telecom

Combining SFP+ MSA compliance, 2x4 octal-port stacked density, outer lightpipes, and robust press-fit technology, the LINK-PP LP24BC01301 supports high-density networking systems:

  • High-Density Enterprise Switches & Routers: Ideal for 10GbE Top-of-Rack (ToR) switches, enterprise core routers, and aggregation line cards requiring 2x4 octal-port stacking and visual status diagnostics.
  • Enterprise Storage Area Networks (SAN): Deployed in 16G Fibre Channel core director modules, SAN storage expansion chassis, and high-port-count storage controllers.
  • Industrial & Telecom Edge Infrastructure: Suitable for 10G CPRI wireless base station units (BBU), optical transport platforms (OTN), and outdoor edge enclosures operating under extended temperature conditions.

How to Select and Verify an SFP+ Cage Assembly Replacement

When evaluating or sourcing 2x4 stacked SFP+ octal-port cage assemblies with lightpipes for new line card designs or supply chain diversification, hardware engineers should verify the following core parameters:

  • Port Matrix Configuration (2x4 Octal-Port): Confirm that a 2x4 stacked footprint (2 rows x 4 columns = 8 ports) aligns with your front-panel I/O port height envelope and bezel cutout matrix.
  • Lightpipe Configuration & Alignment: Verify whether your front-panel faceplate requires integrated Outer LightPipe channels for transmitting PCB SMT LED status lighting cleanly.
  • Mechanical Envelope Dimensions: Verify that the 63.25mm length, 57.50mm width, and 25.36mm height envelope fits within your card slot pitch and front bezel cutout dimensions.
  • EMI Shielding Mechanism (External Springs vs Elastomeric Gaskets): Confirm whether your chassis bezel cutout design is optimized for metallic spring fingers (providing low contact resistance across 8 ports) or conductive elastomeric gaskets.
  • Mechanical Drawing Verification: Check press-fit pin hole layouts, lightpipe exit positions, and grounding spring tolerances against official engineering drawings.

Frequently Asked Questions

What is LINK-PP LP24BC01301?

LINK-PP LP24BC01301 is a 2x4 stacked (8-port 2-high x 4-wide) SFP+ cage assembly featuring integrated outer optical lightpipes and external metallic EMI springs. It supports 10GbE and 16G Fibre Channel transceivers in high-density enterprise switches and storage directors.

What are the density advantages of a 2x4 stacked SFP+ cage assembly?

A 2x4 stacked cage consolidates eight SFP+ ports into a single unified housing. This doubles vertical port capacity while organizing ports into 4 side-by-side columns, drastically reducing automated press-fit board assembly cycles and maximizing port density on 1RU/2RU switch line cards.

Is LINK-PP LP24BC01301 compatible with TE Connectivity or Molex 2x4 SFP+ cages?

Yes. LINK-PP LP24BC01301 is engineered in strict compliance with SFP+ MSA (SFF-8431) mechanical footprint specifications, making it a direct physical, mechanical, and electrical drop-in replacement for equivalent 2x4 stacked SFP+ cages from major OEMs.

What operating temperature range is supported by LP24BC01301?

LINK-PP LP24BC01301 is rated for an industrial operating temperature range of -40°C to +85°C, ensuring reliable physical pin contact force and optical lightpipe clarity in both climate-controlled data centers and unconditioned outdoor edge enclosures.

What are the key mechanical features of LINK-PP LP24BC01301?

Key features include a 2x4 stacked 8-port matrix (2-high x 4-wide), integrated outer optical lightpipes, external metallic EMI shielding springs, solderless press-fit pin termination, and durable alloy construction rated from -40°C to +85°C.

Are compatible replacement options available for LINK-PP LP24BC01301?

Compatible replacement options may be available from qualified manufacturers. Hardware engineers should verify mechanical drawings, press-fit hole patterns, lightpipe exit dimensions, and EMI requirements before final integration or secondary-source qualification.

Download