Product Categories
Namibia 2357518-1 zSFP+ Receptacle With Cage Ganged (2x12) Connector 480 (20x24) Position
- Compatible Brands: TE
- Product Type: Cage Assembly with Integrated Connector
- Data Rate (Gb/s): 28
- EMI Shielding: Internal/External EMI Springs
- Lightpipe Options: Without Lightpipe
- PCB Termination: Through Hole - Press-Fit
- Operating Temperature (°C): -55-105
- Number of Ports: 2xN
- Connector Types: zSFP+
- P/N: 2357518-1
- Manufacturer: LINK-PP
- Compatible Brand: TE
- Competitor P/N: 2357518-1
Category:
Product Description
Product Specifications
| Part Number | 2357518-1 | Part Status | Active |
| Connector Style | Receptacle with Cage, Ganged (2x12) | Connector Type | ZSFP+ |
| Number of Positions | 480 (20x24) | Mounting Type | Through Hole, Right Angle |
| Termination | Press-Fit | Features | EMI Shielded |
| Port Matrix Configuration | 2x12 Ports | Number of Ports | 24 |
| Number of Rear EONs per Port Column | - | Data Rate (Max)(Gb/s) | 28 |
| Operating Temperature Range | -55 – 105°C | Pluggable I/O Applications | SFP+ Stacked Belly-to-Belly |
| Circuit Application | Signal | EMI Containment Feature Type | EMI Springs |
| Included Lightpipe | NO | Cage Material | Stainless Steel |
| PCB Thickness (Recommended) | 1.5mm[.059in] | Tail Length | 1.5mm[.059in] |
TE Connectivity 2357518-1 Compatible 2x12 Stacked zSFP+ Cage Technical Overview
The TE Connectivity 2357518-1 is an ultra-high-density 2x12 stacked zSFP+ (SFP28) 24-port cage assembly featuring an integrated 480-position host electrical connector and heavy-duty stainless steel housing designed for TE Connectivity 2357518-1 compatible applications in 25Gb/s Ethernet and 32Gb/s Fibre Channel high-speed platforms. Featuring solderless press-fit PCB mounting, external metallic EMI spring gaskets, and 28 Gb/s per-channel data rate capability, it delivers 24-port vertical/horizontal I/O consolidation, belly-to-belly mounting support, and low transfer impedance panel grounding for enterprise SAN directors, core switches, and telecom infrastructure.
- Mechanical Form Factor: 2x12 Stacked 24-Port zSFP+ Receptacle Cage Assembly with integrated dual-tier 480-position electrical connector (Lightpipe-free low profile, 2 Rows x 12 Columns).
- Signal Ecosystem Support: Engineered for 28 Gb/s NRZ signaling architectures compliant with SFF-8402, SFF-8432, 25G Ethernet (IEEE 802.3by), and 32G Fibre Channel standards (672 Gbps total aggregate 24-port bandwidth).
- Material Construction: High-rigidity Stainless Steel cage body offering exceptional structural resistance against heavy multi-cable strain across the 12-column faceplate.
- Board Mount Technology: Solderless Through-Hole Press-Fit termination with 1.5mm [.059 in] tail length, optimized for standard 1.5mm [.059 in] PCB substrates.
- Alternative Sourcing Option: Footprint-compatible alternative options are available from LINK-PP to support multi-source procurement strategies and supply chain flexibility.
TE Connectivity 2357518-1 zSFP+ Cage Assembly Product Overview
TE Connectivity 2357518-1 (and compatible LINK-PP alternatives) is an integrated 2x12 stacked zSFP+ receptacle and cage assembly featuring a heavy-duty stainless steel enclosure design, external perimeter metallic EMI spring gaskets, and press-fit PCB mounting. Designed for 24-port density expansion on high-performance line cards in enterprise core switches, SAN storage directors, and network aggregation chassis, this 24-port stacked assembly integrates the 480-position electrical card-edge connector inside the cage body, eliminating secondary SMT host connector reflow operations (-55°C to +105°C).
Key Benefits of TE Connectivity 2357518-1 zSFP+ Cage Assembly
- Ultra-High 2x12 24-Port Density Consolidation (672 Gbps Total Bandwidth): Consolidates twenty-four zSFP+ ports into a single integrated housing, maximizing front-panel I/O throughput in 1RU/2RU switch line cards.
- Integrated 480-Position Receptacle & Stainless Steel Cage Architecture: Houses the 24-port 480-position electrical connector and stainless steel 2x12 cage shell in a single press-fit assembly, eliminating 24 separate SMT host connector reflow steps.
- Heavy-Duty Stainless Steel Body Construction: Superior mechanical tensile strength prevents cage wall bowing or port deformation under heavy 24-cable DAC/AOC strain.
- Lightpipe-Free Airflow Design & Belly-to-Belly Mounting: Flat top profile eliminates lightpipe channels, maximizing vertical clearance for chassis forced airflow, riding heatsinks, or belly-to-belly line card configurations.
- External Metallic EMI Spring Shielding: 360-degree perimeter spring fingers establish resilient contact force against chassis bezel cutouts across the extended 12-column width for consistent grounding at high 28G frequencies.
- Multi-Source Availability: Industry-standard footprint allows deployment alongside compatible replacement alternatives from qualified suppliers like LINK-PP for BOM cost optimization.
2x12 Stacked 24-Port Architecture with Integrated 480-Pin Connector
Engineered in compliance with zSFP+ / SFP28 MSA (SFF-8402 / SFF-8432) mechanical specifications, the TE Connectivity 2357518-1 features a 2x12 stacked (two rows high by twelve columns wide) architecture containing an integrated 480-position (20 pins per port x 24 ports) card-edge connector. This combined housing ensures perfect pin-to-cage alignment across all 24 ports, removing mechanical placement tolerances associated with discrete component assemblies.
Stainless Steel Structural Rigidity & 1.5mm Press-Fit Tail Integration
The right-angle board mount structure features a 1.5mm [.059 in] tail length engineered specifically for standard 1.5mm [.059 in] thick PCB motherboards. The high-rigidity stainless steel housing withstands significant insertion force during simultaneous 24-module latching, ensuring reliable compliant pin compression for all 480 dual-tier receptacle signal contacts and cage retention legs inside multi-layer plated through-holes (PTH).
Enhanced EMI Shielding with External Spring Contacts
Operating twenty-four adjacent ports at high-frequency 28 Gb/s serial rates requires rigorous electromagnetic compatibility (EMC) design to control radiated emissions and prevent channel crosstalk between adjacent vertical and horizontal ports.
360-Degree External EMI Shielding Springs Across 24 Ports
The TE Connectivity 2357518-1 incorporates external perimeter metallic spring contacts around all twenty-four port openings. When inserted through the front panel, these springs establish low-impedance grounding against the chassis bezel cutout, forming a continuous Faraday shielding barrier across the entire 2x12 24-port interface.
Corrosion-Resistant Stainless Steel Construction
Formed from high-strength stainless steel, the cage housing delivers superior mechanical stiffness, wear resistance over repeated module insertion/extraction cycles, and long-term corrosion protection across an extended operating temperature range of -55°C to +105°C. This supports system-level EMC design requirements for equipment targeting FCC and CE compliance.
Press-Fit SFP+ Integrated Receptacle Assembly & PCB Integration
Designed for automated, high-reliability solderless PCB manufacturing, the 2357518-1 utilizes precision compliant press-fit pin technology for signal, power, and ground contacts.
Solderless All-Through-Hole Press-Fit Termination
The combined assembly installs mechanically into host PCB plated through-holes (PTH) using a single controlled press insertion tool. This solderless Through-Hole Technology (THT) eliminates high-temperature SMT reflow ovens or secondary wave soldering operations, preserving high-speed signal integrity and simplifying line card production rework.
Target Applications: Enterprise Switches, SAN Storage Directors, and Telecom
Combining zSFP+ MSA compliance, 2x12 24-port stacked density, stainless steel construction, and press-fit receptacle technology, the TE Connectivity 2357518-1 supports high-density networking systems:
- High-Density Enterprise Core Switches & Routers: Ideal for 25GbE Top-of-Rack (ToR) switches, enterprise core routers, and 100G (4x25G breakout) line cards requiring 2x12 24-port stacking.
- Enterprise Storage Area Networks (SAN): Deployed in 32G Fibre Channel core director modules, SAN storage expansion chassis, and high-port-count storage array controllers.
- Telecom Edge Infrastructure: Suitable for 25G eCPRI wireless base station units (BBU), optical transport equipment (OTN), and outdoor edge compute enclosures.
How to Select and Verify a zSFP+ Cage Assembly Replacement
When evaluating or sourcing 2x12 stacked SFP+ 24-port cage assemblies with integrated connectors for new line card designs or supply chain diversification, hardware engineers should verify the following core parameters:
- Integrated 480-Pin Receptacle & Stainless Steel Construction: Confirm whether your PCB footprint and faceplate require an all-in-one integrated 2x12 cage with pre-installed 480-position connector and stainless steel body versus discrete cages.
- Press-Fit Tail Length & Board Thickness: Ensure the 1.5mm press-fit tail length matches your motherboard specification (TE 2357518-1 is optimized for standard 1.5mm [.059 in] PCBs to terminate dual-tier 480-position signal pins).
- Port Matrix Configuration (2x12 24-Port): Confirm that a 2x12 stacked footprint (2 rows x 12 columns = 24 ports) aligns with your front-panel I/O port height envelope and bezel cutout matrix.
- EMI Shielding Mechanism (External Springs vs Elastomeric Gaskets): Confirm whether your chassis bezel cutout design is optimized for metallic spring fingers (providing low contact resistance across 24 ports) or conductive elastomeric gaskets.
- Mechanical Drawing Verification: Check 480-position press-fit hole patterns, cage retention leg locations, and grounding spring tolerances against official engineering drawings.
Frequently Asked Questions
What is TE Connectivity 2357518-1?
TE Connectivity 2357518-1 is an ultra-high-density integrated 2x12 stacked zSFP+ cage assembly featuring a 480-position host electrical connector, stainless steel body construction, and external metallic EMI springs. It supports 25G Ethernet and 32G Fibre Channel optical transceivers in high-density enterprise switches and storage directors.
What are the advantages of an integrated 2x12 stacked SFP+ cage with a 480-position connector?
An integrated 2x12 assembly combines the metallic cage shell and 480-pin electrical host receptacle into a single press-fit unit. This eliminates SMT reflow soldering for twenty-four separate host connectors, guarantees precise alignment between electrical contacts and cage ports, and drastically reduces PCB assembly steps.
Why is stainless steel material important for a 2x12 stacked SFP+ cage?
24-port ganged cages experience significant mechanical strain during multi-cable latching. Stainless steel provides high structural rigidity to prevent cage wall bowing across the wide 12-column faceplate, ensuring consistent pin alignment and module retention.
What PCB thickness and tail length are specified for TE 2357518-1?
TE Connectivity 2357518-1 is specifically optimized for a recommended PCB thickness of 1.5mm [.059 in] with a 1.5mm [.059 in] press-fit tail length to ensure proper mechanical pin compliance in multi-layer boards.
What are the key mechanical features of TE Connectivity 2357518-1?
Key features include a 2x12 stacked 24-port matrix (2-high x 12-wide), integrated 480-position dual-tier electrical connector, lightpipe-free flat top profile, external metallic EMI shielding springs, solderless 1.5mm press-fit termination for 1.5mm PCBs, and stainless steel construction rated from -55°C to +105°C.
Are compatible replacement options available for TE Connectivity 2357518-1?
Yes, LINK-PP provides footprint-compatible alternatives designed as functional drop-in options for TE Connectivity 2357518-1. Hardware engineers should verify mechanical drawings, 480-pin press-fit hole patterns, tail length, and EMI spring requirements before final secondary-source qualification.
Download
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications



























