HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open

Product Categories


Namibia LP72426ANL 2.5G Base-T Single Port 24 PIN SMD PoE+ Lan Transformer Modules

LINK-PP LP72426ANL is a 2.5GBASE-T single-port LAN transformer, 24-pin surface mount, specified for PoE+ Ethernet applications.
  • Compatible Brands: LINK-PP
  • Data Rate: 2.5G BASE-T
  • Mounting Type: Surface Mount
  • Turns Ratio TX: 1CT:1CT
  • Temperature: -40℃ TO +85°C
  • Application -LAN: PoE+
  • P/N: LP72426ANL
  • Manufacture: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LP72426ANL

Product Description

Product Specifications

LINK-PP Part Number LP72426ANL Transformer Type Lan Transformer
Part Status Active Turns Ratio - Primary: Secondary 1:1 Transmitter, 1:1 Receiver
Construction OPEN FRAME Application-Lan Ethernet(PoE+)
Number of Ports SINGLE Speed 2.5G Base-T
Package Tape & Reel Cores per Port 8
AutomDX Yes Comment SAME AS NL VERSION
PIN Number 24 Mounting Type Surface Mount
Package Height (Inches/mm) 0.236/6.00 Package Length (Inches/mm) 0.715/18.15
Package Width (Inches/mm) 0.630/16.00 Temperature -40℃ TO +85℃
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C,S

Product Engineering Overview

LINK-PP LP72426ANL is a single-port 2.5GBASE-T LAN transformer in a 24-pin surface-mount package. The existing product table specifies PoE+ Ethernet and a 1CT:1CT RX/TX turns ratio.

The listed package envelope is 18.15 × 16.00 × 6.00 mm (length × width × height), and the component temperature range is −40°C to +85°C. When selecting the device, match the complete transformer pinout and center-tap arrangement to the host PHY and board layout.

PCB and Electrical Interface

A 1CT:1CT turns ratio alone does not establish interchangeability: compare winding connections, terminal assignments and the PCB land pattern with the applicable schematic and mechanical drawing. Evaluate the assembled board for the host interface and operating conditions.

Selection and Qualification

The product record does not identify a third-party cross-reference. An alternative needs its pin assignment, winding details and mechanical dimensions compared against the applicable drawing. For sample evaluation, use the full part number and applicable revision; confirm packaging and production requirements with the supplier.

Frequently Asked Questions

What Ethernet interface and package are listed for LP72426ANL?

The existing record identifies a 2.5GBASE-T single-port transformer with 24 surface-mount pins.

Does LP72426ANL support power over Ethernet?

The product table specifies PoE+. Check the product documentation for the relevant current, power-path and standard requirements in the intended system.

Can another 1CT:1CT transformer use the same PCB footprint?

Not necessarily. The ratio does not define terminal mapping, electrical ratings or land pattern; compare the relevant drawings.

What component temperature range is listed?

The record specifies −40°C to +85°C; the finished equipment requires its own environmental assessment.

Download