Product Categories
Namibia WE LAN-Transformer 749010040 Compatible LINK-PP LP1164NL 10/100 Base-T Quad Port LAN Magnetic
- Compatible Brands: Wurth
- Data Rate: 10 BASE-T,100 BASE-TX
- Mounting Type: Surface Mount
- Turns Ratio TX: 1CT:1CT
- Temperature: 0℃ TO +70℃
- Application -LAN: ETHERNET(Non PoE)
- P/N: LP1164NL
- Manufacture: LINK-PP
- Compatible Brand: WE
- Compatible P/N: 749010040
Category:
Product Description
Product Specifications
| LINK-PP Part Number | LP1164NL | WE Part Number | 749010040 |
| Part Status | Active | Transformer Type | LAN Transformer |
| Construction | Open Frame | Application-LAN | Ethernet (Non-PoE) |
| Number of Ports | Quad Port | Speed | 10/100BASE-T |
| Package | Tape & Reel | Cores per Port | 16 |
| AutoMDX | Yes | Comment | Same as NL Version |
| PIN Number | 40 | Mounting Type | Surface Mount |
| Package Height (Inches/mm) | 0.260 / 6.60 | Package Length (Inches/mm) | 1.125 / 28.58 |
| Package Width (Inches/mm) | 0.630 / 16.00 | Temperature | 0°C to +70°C |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T, C, S |
WE 749010040 Compatible Quad-Port 10/100BASE-T Surface-Mount Discrete LAN Transformer
The LINK-PP LP1164NL is a quad-port discrete 10/100BASE-T Fast Ethernet LAN transformer module specified for non-PoE network hardware. For hardware engineers, it consolidates four independent Fast Ethernet channels into a single 40-pin surface-mount package, featuring a 1CT:1CT turns ratio (T, C, S configuration), AutoMDX support, and physical-layer electrical isolation. For OEM and procurement teams, the LP1164NL provides an alternative sourcing option for the WE 749010040, reducing component placement count on multi-port network boards while offering standard Tape & Reel SMT packaging.
Featuring an open-frame construction, a 6.60 mm package height, and an operating temperature range of 0°C to +70°C, the module is suited for multi-port hubs, SOHO switches, LAN-on-Motherboard (LOM) designs, and embedded communication systems. Engineering and procurement teams should verify the mechanical drawing, pin assignment, PCB land pattern, and selected PHY documentation before production release.
WE 749010040 Compatible Design Positioning
The LP1164NL is positioned as a compatible alternative to the WE 749010040 for 10/100BASE-T Fast Ethernet applications, providing hardware engineering and procurement teams with a potential second-source option for designs requiring comparable package dimensions, pinout footprints, and electrical interface characteristics.
To ensure proper integration on existing or new motherboard designs, engineering teams should cross-reference the mechanical drawing, pin assignment, solder pad geometry, and electrical characteristics against original design requirements prior to volume release.
Quad-Port Density and 10/100BASE-T Physical Layer Coupling
Consolidating multiple Fast Ethernet channels into a single surface-mount module provides layout and routing advantages for multi-port networking equipment:
- Four-Channel Integration: Consolidating four Fast Ethernet channels into one physical 28.58 mm by 16.00 mm package streamlines routing between multi-port PHY transceivers and external RJ45 connectors, reducing component placement area compared to using four separate single-port modules.
- Non-PoE Data Architecture: The module is specified for non-PoE 10/100BASE-T applications, dedicating the internal magnetic layout entirely to differential data transmission without high-current DC power paths.
- Symmetrical Coupling & AutoMDX: Incorporates a symmetrical 1CT:1CT turns ratio across transmit and receive channels with T, C, S configuration, supporting AutoMDX-compatible Fast Ethernet PHY implementations.
Mechanical and PCB Surface-Mount Considerations
Physical mounting and board layout are critical factors when implementing multi-channel discrete LAN magnetics:
1. 40-Pin Open-Frame Package
The open-frame construction provides a vertical height of 6.60 mm (0.260 inches) with a footprint of 28.58 mm by 16.00 mm. This surface-mount package provides accessible lead inspection after reflow soldering.
2. Tape & Reel Packaging for SMT Assembly
Supplied in Tape & Reel format, the LP1164NL is engineered for automated high-speed pick-and-place equipment and standard surface-mount assembly workflows.
3. PCB Land Pattern and Pinout Verification
The module incorporates a 40-pin SMD footprint. Because pin arrangements and internal schematic connections can differ between manufacturers, engineers should confirm the land pattern, pin pitch, and schematic against official product drawings prior to finalizing board artwork.
Discrete Transformer vs. Integrated MagJack Solutions
Selecting between a discrete LAN transformer and an integrated MagJack involves several hardware design trade-offs:
- Layout and Placement Flexibility: Discrete transformers allow engineers to place the magnetics independently on the PCB, optimizing the physical separation between the host PHY and the board edge.
- Connector Selection Freedom: A discrete transformer architecture allows the design to be paired with separate RJ45 connectors, including 1x4 horizontal ganged jacks, 2x2 stacked connectors, or specialized enclosure-specific interfaces.
- Thermal Separation: Separating the transformer from the physical I/O connector helps distribute heat dissipation across the board rather than concentrating thermal load at the front-panel connector cavity.
Architecture Comparison: Quad-Port Fast Ethernet Transformer vs. Alternative Implementations
| Evaluation Metric | LP1164NL Quad-Port 10/100 SMD Transformer |
4 x Single-Port 10/100 SMD Transformers |
Quad-Port Integrated 10/100 MagJack |
|---|---|---|---|
| Channel Integration | Quad Port (4 Channels Consolidated) | Single channel per component | Quad port integrated with RJ45 |
| Ethernet Data Rate | 10/100BASE-T (Fast Ethernet) | 10/100BASE-T (Fast Ethernet) | 10/100BASE-T |
| Mounting Technology | Surface Mount (40-Pin SMD) | Surface Mount (SMD) | Through-Hole (THT) |
| Operating Temperature | 0°C to +70°C | Model-dependent | Model-dependent |
| I/O Connector Selection | Independent (Can be paired with separate RJ45 connectors) | Independent | Fixed by connector assembly |
| Primary Design Focus | Consolidates four 10/100 channels for SMT assembly | Higher placement area required | Consolidates jack and magnetics into one component |
Application Considerations for LP1164NL
| Target Application Profile | Primary Engineering Consideration |
|---|---|
| Multi-Port SOHO Switches & Network Hubs | Consolidates four Fast Ethernet channels, simplifying multi-port board routing and SMT assembly. |
| LAN-on-Motherboard (LOM) Architectures | Provides physical-layer galvanic isolation and signal coupling directly on multi-channel embedded mainboards. |
| ADSL Modems & Broadband Gateways | 40-pin surface-mount package fits multi-port home and commercial gateway layouts. |
| Embedded Multi-Channel Controllers | Independent placement allows optimized trace routing between quad-PHY transceivers and front-panel I/O. |
Engineering Verification Checklist
Before releasing a PCB layout or finalizing a bill of materials (BOM) using the LP1164NL, hardware engineers should confirm the following design parameters against the official datasheet:
- Package Dimensions & Vertical Clearance: Verify the 6.60 mm height, 28.58 mm length, and 16.00 mm width against enclosure or card envelope limits.
- Pinout and Schematic Alignment: Verify the 40-pin terminal numbering, center-tap connections, and differential-pair assignments against the official product drawing and selected PHY reference design.
- PCB Land Pattern: Check pad dimensions, pitch, and solder mask clearances for the 40-pin footprint on the manufacturer's recommended layout.
- Quad-PHY Differential Routing: Ensure controlled-impedance differential trace routing and AutoMDX compatibility across all four Fast Ethernet channels.
- Thermal Operating Environment: Confirm that the component operating environment remains within the specified 0°C to +70°C range.
- SMT Process Compatibility: Verify Tape & Reel feeder setup and convection reflow profiles for the open-frame package.
Frequently Asked Questions
Is the LINK-PP LP1164NL a compatible alternative to the WE 749010040?
The LP1164NL is designed as a compatible alternative to the WE 749010040 with a 40-pin SMD open-frame package, quad-port 10/100BASE-T Fast Ethernet capability, non-PoE data routing, 1CT:1CT turns ratio, and an operating temperature range of 0°C to +70°C. Engineers should verify the mechanical drawing, pin assignments, and PCB land pattern before production use.
What is the design advantage of a quad-port discrete LAN transformer?
A quad-port discrete transformer consolidates four Fast Ethernet magnetic channels into a single 28.58 mm x 16.00 mm footprint. This reduces component placement count, streamlines PCB differential trace routing directly from multi-port PHY transceivers, and preserves board area compared to four separate single-port modules.
What turns ratio and internal configuration does this transformer use?
The module features a 1CT:1CT turns ratio across transmit and receive channels with a T, C, S internal configuration, compatible with standard Fast Ethernet PHY transceiver specifications.
Is the LP1164NL suitable for Power over Ethernet (PoE)?
No. The LP1164NL is specified as a Non-PoE transformer optimized solely for 10/100BASE-T differential data communication. For systems requiring PoE power delivery, a transformer with dedicated PoE-rated center-tap power paths should be selected.
Does the LP1164NL support AutoMDX?
Yes. The product specification lists AutoMDX as supported. Engineers should verify the selected PHY interface and complete reference design before production use.
What is the operating temperature range for the LP1164NL?
The LP1164NL is rated for a commercial operating temperature range of 0°C to +70°C, suited for enterprise networking equipment, hubs, SOHO switches, and standard commercial hardware.
Download
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications



























