HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open

Product Categories


Namibia Belfuse L829-1J1T-JM Compatible LINK-PP LPJT7200A98NL 2.5G Base-T low profile Magjack rj45 Tab Up Orange&Green&Yellow Leds

LINK-PP LPJT7200A98NL is a 2.5G Base-T low profile 11.30mm RJ45 Magjack with Orange/Green/Yellow LEDs (-40°C to +85°C). Drop-in replacement for Belfuse L829-1J1T-JM.
  • Compatible Brands: Belfuse
  • Number of Ports: 1X1
  • Speed: 2.5GBase-T
  • PoE: Non-PoE
  • Latch: Up
  • Mounting Type: THT
  • LED Option: Orange&Green / Yellow
  • Shield EMI Tabs: YES
  • Temperature: 0℃ to 70℃
  • P/N: LPJT7200A98NL
  • Manufacturer: LINK-PP
  • Compatible Brand: Belfuse
  • Compatible P/N: L829-1J1T-JM

Product Description

Product Specifications

LINK-PP Part Number LPJT7200A98NL Belfuse Part Number L829-1J1T-JM
Part Status Active Connector Type Jack
Number of Positions/Contacts 12p8c (RJ45, Ethernet) Application-Lan Ethernet(NON PoE)
Number of Ports 1x1 Port Speed 10/100/1000 Base-T
Latch Up Cores per Port 8
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs With LED Option Orange&Green&Yellow
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.445/11.30 Package Length (Inches/mm) 0.953/24.20
Package Width (Inches/mm) 0.701/17.80 Temperature -40℃ TO 85℃
Bst Circuit Yes AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

Belfuse L829-1J1T-JM Compatible LINK-PP LPJT7200A98NL 2.5G Low Profile RJ45 Magjack Technical Overview

The LINK-PP LPJT7200A98NL (engineered as a direct 100% pin-to-pin drop-in replacement for Belfuse L829-1J1T-JM) is an industrial-grade single-port (1x1) Tab-Up 12p8c RJ45 Integrated Connector Module (ICM) with an ultra-low profile package height of 11.30mm [.445 in], built-in 2.5GBASE-T Multi-Gigabit magnetics, tri-color Orange/Green/Yellow status LEDs, and EMI shield spring tabs. Compliant with IEEE 802.3bz standards, it integrates an 8-core transformer/choke matrix (1CT:1CT turns ratio) across 4 differential pairs, delivering 2.5 Gbps full-duplex transmission, 1500Vrms isolation, ESD protection, and extended operating temperature reliability from -40°C to +85°C for network firewalls, enterprise servers, and switches.

  • 2.5GBASE-T Multi-Gigabit Magnetics Architecture: 12p8c RJ45 connector integrated with an 8-core magnetic matrix (1CT:1CT turns ratio) supporting 2.5 Gbps communication over Cat5e/Cat6 wiring.
  • Ultra-Low Profile 11.30mm Package Height: Compact 11.30mm [.445 in] profile saves critical vertical board clearance in 1U rack-mount network firewalls, high-density servers, and switches.
  • Tri-Color Diagnostic Status LEDs: 12p8c layout accommodates multi-LED channels (Orange, Green, Yellow), enabling independent visual indication for multi-speed links, duplex states, and activity.
  • Direct Cross-Reference Replacement: Fully qualified footprint and electrical drop-in replacement for Belfuse L829-1J1T-JM for BOM cost optimization and secondary sourcing.

LINK-PP LPJT7200A98NL 2.5G Multi-Gigabit RJ45 Magjack Connector Overview

LINK-PP LPJT7200A98NL is a right-angle side-entry 1x1 Tab-Up 12p8c RJ45 integrated connector module (ICM) designed for non-PoE 2.5G Multi-Gigabit Ethernet platforms. Housing signal transformers, common-mode chokes, tri-color (Orange/Green/Yellow) status LEDs, and Bob Smith Termination directly inside a metal-shielded jack with EMI spring tabs, this connector simplifies motherboard layout by replacing discrete PHY magnetics. It serves as a fully qualified, pin-compatible secondary-source alternative to Belfuse L829-1J1T-JM in 1U network firewalls, enterprise servers, commercial intercoms, and industrial gateways.

Key Benefits of LINK-PP LPJT7200A98NL / Belfuse L829-1J1T-JM Compatible Magjack

  • Multi-Gigabit 2.5GBASE-T Speed (IEEE 802.3bz): Embeds an 8-core transformer and common-mode choke matrix that isolates and filters 4 differential pairs, ensuring clean 2.5 Gbps eye diagrams with low insertion loss up to 125 MHz Nyquist frequency.
  • Ultra-Low Profile 11.30mm Package Height: Significantly lowers vertical connector height compared to traditional 13.45mm/16.90mm Magjacks, making it ideal for thin-profile 1U network firewalls and dense server motherboards.
  • Tri-Color Orange, Green & Yellow Diagnostic LEDs: Integrated multi-LED channels provide flexible visual indication for 10/100/1000/2.5G link speeds and data traffic activity on network security appliances.
  • EMI Shield Tabs for Enhanced Panel Grounding: Outfitted with external EMI spring tabs on the metal shield frame that press tightly against chassis front panel cutouts, forming a low-impedance grounding loop to suppress radiated emissions.
  • Industrial Operating Temperature Range (-40°C to +85°C): Constructed with high-grade FR4 substrate and durable housing to withstand severe thermal fluctuations in unconditioned outdoor equipment and telecom racks.
  • Direct Second Sourcing for Belfuse L829-1J1T-JM: Identical 12p8c through-hole PCB land pattern and pinout allow seamless drop-in secondary sourcing to reduce procurement lead times.

Integrated Magnetics & 2.5GBASE-T Signal Architecture

The LINK-PP LPJT7200A98NL utilizes an advanced 2.5G Multi-Gigabit Integrated Connector Module (ICM) architecture that embeds 2.5GBASE-T magnetics directly behind the 12p8c contact pins, eliminating high-frequency noise radiation caused by long trace runs on the motherboard.

8-Core Multi-Gigabit Transformer & Choke Configuration

Featuring a 1CT:1CT transmit and receive turns ratio with 8 magnetic cores per port, the LPJT7200A98NL establishes 1500Vrms galvanic isolation between the 2.5G Ethernet PHY transceiver chip and the external network cable. The 8-core layout provides precise impedance matching across all 4 differential pairs required for 2.5GBASE-T, suppressing inter-pair crosstalk and common-mode noise.

Bob Smith Termination (BST) & ESD Rejection

The integrated Bob Smith Termination (BST) network utilizes high-voltage capacitors and precision resistors to balance line impedance on unused cable pairs. This prevents common-mode noise reflection, reduces radiated EMI emissions, and enhances system ESD immunity during cable plugging.

PCB Mounting & Mechanical Specifications

Designed for automated Through-Hole Technology (THT) assembly, the LPJT7200A98NL incorporates robust mechanical features to ensure structural integrity on FR4 substrates.

11.30mm Ultra-Low Profile Height & 12p8c Layout

With package dimensions of 11.30mm H x 24.20mm L x 17.80mm W, the LPJT7200A98NL provides an ultra-low vertical footprint. The 12p8c through-hole layout accommodates dedicated LED pins for tri-color indication, while T-Post mechanical pegs anchor the housing firmly to the motherboard during cable plugging.

Target Applications: Network Firewalls, Enterprise Servers, and Intercoms

Combining IEEE 802.3bz 2.5G speed, 11.30mm ultra-low profile height, BST noise suppression, EMI shield tabs, and Belfuse L829-1J1T-JM compatibility, the LINK-PP LPJT7200A98NL supports diverse embedded systems:

  • Network Firewalls & Security Appliances: Ideal for 1U rack-mount firewalls, SD-WAN security appliances, and enterprise VPN gateways requiring 2.5G multi-gigabit uplinks.
  • Enterprise 2.5G Servers & Blade Modules: Deployed in high-density rack servers, blade systems, and cloud storage controllers.
  • Commercial Intercoms & Industrial Gateways: Suitable for multi-channel IP intercom consoles, Wi-Fi 6 access points, and industrial automation gateways.

How to Select and Verify LPJT7200A98NL vs. Belfuse L829-1J1T-JM

Hardware design engineers and procurement specialists evaluating the LINK-PP LPJT7200A98NL as a second-source replacement for Belfuse L829-1J1T-JM should verify the following core parameters:

  • 2.5GBASE-T Magnetics Compatibility: Confirm that an 8-core magnetic matrix (4 differential pairs) and a 1CT:1CT turns ratio match your 2.5G Ethernet PHY transceiver reference design.
  • 11.30mm Package Height Clearance: Verify that the 11.30mm [.445 in] ultra-low package height fits within your 1U network firewall bezel window.
  • 12p8c THT Pinout & LED Driving Polarity: Confirm that the 12-pin through-hole land pattern and Orange/Green/Yellow LED driving circuitry match the Belfuse L829-1J1T-JM PCB Gerber layout.
  • Operating Temperature Requirements: Confirm that the -40°C to +85°C industrial temperature envelope satisfies your product's environmental specification.

Frequently Asked Questions

Is LINK-PP LPJT7200A98NL compatible with Belfuse L829-1J1T-JM?

Yes. LINK-PP LPJT7200A98NL is a direct functional, electrical, and footprint drop-in replacement for Belfuse L829-1J1T-JM, featuring the same 1x1 Tab-Up 2.5GBASE-T Magjack layout, 11.30mm package height, and Orange/Green/Yellow LEDs.

Does LINK-PP LPJT7200A98NL support 2.5GBASE-T Multi-Gigabit Ethernet?

Yes. LPJT7200A98NL is equipped with an 8-core multi-gigabit magnetic matrix supporting 2.5G Base-T data rates compliant with IEEE 802.3bz standards over Cat5e or Cat6 cabling.

What is the package height of LPJT7200A98NL?

LPJT7200A98NL features an ultra-low profile package height of 11.30mm (0.445 inches), making it significantly thinner than standard 13.45mm or 16.90mm Magjacks.

What LED options are available on LPJT7200A98NL?

LPJT7200A98NL features integrated tri-color Orange & Green & Yellow LEDs, driven via a 12-pin (12p8c) layout to provide flexible multi-speed link and activity diagnostics.

What is the operating temperature range of LPJT7200A98NL?

LINK-PP LPJT7200A98NL is rated for an industrial operating temperature range of -40°C to +85°C (-40°F to +185°F), making it suitable for unconditioned outdoor equipment and telecom racks.

Is LPJT7200A98NL a Power over Ethernet (PoE) connector?

No. LPJT7200A98NL is a Non-PoE 2.5G Multi-Gigabit RJ45 Magjack designed strictly for signal transmission and isolation without DC power delivery.

Download

Product Drawing