HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open

Product Categories


Kuwait L9-SD311G-20PPC 1.25Gbps 1310nm 20km 3.3V Single-Mode Dual SC 1×9 Optical Transceiver

Integrate Gigabit Ethernet into embedded systems with the LINK-PP L9-SD311G-20PPC 1.25Gbps 1x9 optical transceiver. Features 1310nm DFB laser, 20km SMF reach, and 3.3V supply.
  • Compatible Brands: LINK-PP
  • Data Rate: 1.25G
  • Distance: ≤20km
  • Type: Single Mode
  • Connector: Duplex SC
  • Wavelength: 1310nm
  • P/N: L9-SD311G-20PPC
  • Manufacture: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: L9-SD311G-20PPC

Product Description

Product Specifications

LINK-PP Part Number L9-SD311G-20PPC Vendor Name LINK-PP
Form Factor 1x9 Max Data Rate 1.25Gbps
Wavelength 1310nm Max Cable Distance 20km
Connector Duplex SC Optical Components DFB/PIN
Fiber Type SMF Supply Voltage 3.3V
Receiver Sensitivity <-23dBm Operating Temperature Range 0 to 70°C
Application 1G Fibre Channel, Gigabit Ethernet, Switch-to-Switch Interconnects, Switched Backplane Applications, Broadband Aggregation, Wireless Infrastructure, and Gigabit Ethernet Media Converter Systems

LINK-PP L9-SD311G-20PPC 1.25Gbps 1x9 Optical Transceiver (3.3V, SMF, 1310nm, 20km, Duplex SC) for Embedded Ethernet and Media Converters

The LINK-PP L9-SD311G-20PPC is a high-performance, embedded 1.25Gbps 1x9 Single In-line Package (SIP) optical transceiver designed for Gigabit Ethernet (1000BASE-LX), 1G Fibre Channel, and legacy telecommunications equipment. Engineered for direct PCB through-hole mounting, this fixed-port optical module provides a cost-effective, high-reliability physical layer interface for embedded networking applications and media conversion systems.

Operating on a single +3.3V power supply, the transceiver integrates a 1310nm Distributed Feedback (DFB) laser transmitter and a high-sensitivity PIN photodiode receiver paired with a trans-impedance preamplifier (TIA). Delivering a maximum reach of 20 kilometers over OS2 Single-Mode Fiber (SMF) with a receiver sensitivity better than -23dBm, the module features a standard Duplex SC optical receptacle. Fully compliant with 1x9 footprint industry standards and IEEE 802.3z 1000BASE-LX specifications, it offers hardware design engineers a ruggedized, vibration-resistant optical engine for fixed-configuration hardware.

Application Topologies and Deployment Scenarios

Unlike hot-pluggable SFP modules, 1x9 optical transceivers are soldered directly onto host PCBs. This permanent mechanical connection makes them the industry standard for cost-sensitive, fixed-port hardware and high-vibration environments.

Fiber Optic Media Converters and Fixed Access Terminals

The 1x9 form factor is the predominant optical interface used in unmanaged and managed Gigabit Ethernet Media Converters (UTP-to-Fiber). The L9-SD311G-20PPC serves as the primary electro-optical conversion engine, bridging 10/100/1000BASE-T copper Ethernet from local subscriber premises to central office (CO) optical distribution networks across 20km single-mode spans.

Industrial Ethernet Switches and CCTV Video Transmission

In industrial automation, intelligent transportation systems (ITS), and municipal CCTV security networks, hardware is frequently subjected to mechanical shock and vibration. The soldered 9-pin footprint of this transceiver eliminates the edge-connector oxidation and fretting corrosion common in pluggable SFP cages, ensuring 24/7 continuous uptime in hardened outdoor cabinets and industrial switches.

Switched Backplanes and Broadband Infrastructure

For telecom broadband access nodes, wireless backhaul units, and switched backplane architectures, this module provides a low-cost, fixed switch-to-switch optical link. It enables high-speed data aggregation between main processing cards and remote expansion shelves across campus distances.

Physical Layer Design and Optoelectronic Architecture

Designed for embedded system integration, this 1x9 module combines precision optical components with standard differential electrical interfaces.

1310nm DFB Laser & High-Sensitivity PIN Receiver Architecture

Achieving a reliable 20km reach over single-mode fiber requires strict spectral control. The transmission path utilizes a 1310nm DFB (Distributed Feedback) laser, providing a much narrower spectral linewidth and lower chromatic dispersion penalty compared to traditional Fabry-Perot (FP) lasers. The receiving path features a high-responsivity PIN photodiode array capable of detecting weak optical signals down to <-23dBm, offering a robust optical power budget for intermediate single-mode runs.

Through-Hole 1x9 Package Engineering & Mechanical Stability

The module is housed in a wave-solderable, flame-retardant plastic package with a standard 1x9 pin layout (9 electrical pins + duplex SC optical receptacle). Soldering the pins directly to the PCB creates a permanent ground and mechanical anchor, resisting mechanical strain during fiber patch cord insertion and removal.

3.3V LVPECL Differential Signal Coupling

Operating from a single +3.3V DC power supply, the module utilizes standard Low-Voltage Positive Emitter-Coupled Logic (LVPECL) or PECL differential data inputs and outputs. The integrated Signal Detect (SD) pin provides an active-high TTL/PECL logic output to inform host MAC controllers of optical link status.

Multi-Vendor Interoperability and Standard Compliance

The L9-SD311G-20PPC is manufactured to universal 1x9 footprint specifications, ensuring seamless pin-for-pin replacement across global OEM board designs.

Industry-Standard 1x9 Footprint & Pinout Compatibility

Featuring a standard 1x9 pin assignment (Pin 1 Rx VEE to Pin 9 Tx VEE), this module is a direct drop-in replacement for legacy 1x9 1.25G transceivers from major manufacturers. It allows PCB layout engineers to drop the component into existing CAD footprints without modifying trace routing or power plane filtering.

Gigabit Ethernet & 1G Fibre Channel Conformance

The optical transceiver strictly adheres to IEEE 802.3z 1000BASE-LX and ANSI 1G Fibre Channel physical layer specifications. It supports data rates from 100Mbps up to 1.25Gbps, ensuring auto-negotiation compatibility with legacy Fast Ethernet and Gigabit networking hardware.

Selection Guide and Embedded Design Considerations

Integrating 1x9 optical components onto circuit boards requires adherence to wave soldering and board-level design guidelines.

1x9 Soldered Module vs. SFP Hot-Pluggable Module

  • 1x9 Module (This Product): Soldered directly to the PCB. Lower unit cost, higher mechanical resistance to vibration, lower profile, ideal for high-volume fixed media converters and embedded IPCs.
  • SFP Module: Requires a metal cage, host connector, and hot-swappable logic. Higher total BOM cost, but allows field replacement by end users.

Wave Soldering & PCB Assembly Guidelines

  • Soldering Temperature: Standard wave soldering temperatures (up to 260°C for <10 seconds) are supported on the electrical pins.
  • Process Protection: The transceiver comes equipped with a protective dust plug over the SC receptacle. Keep the dust plug inserted during wave soldering and board washing to prevent flux or aqueous residue from contaminating the internal optical lenses.
  • Bypass Capacitors: Place 0.1µF ceramic decoupling capacitors as close as possible to Pin 5 (Rx Vcc) and Pin 6 (Tx Vcc) on the PCB layout to suppress power supply noise.

Download